Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 501
1. To install, reverse the removal procedure.
Tighten to 10 Nm.
2. Tighten to 4 Nm.
3. Check and top up the coolant if necessary.
Published: 11-May-2011
Auxiliary Heating - Fuel Fired Booster Heater
Removal and Installation
Removal
1. Remove the air deflector.
For additional information, refer to:
Air Deflector - 2.0L Duratorq-
TDCi/2.2L Duratorq-TDCi (110kW /150PS) - Puma
(501-02 Front End Body
Panels, Removal and Installation).
2. Disconnect the fuel fired booster heater electrical connector.
3. Disconnect the fuel fired booster heater fuel line.
4. Detach the coolant hose.
5. NOTE: Clamp the hose to minimize coolant loss.
Disconnect the coolant hose.
6. NOTE: Clamp the hose to minimize coolant loss.
Disconnect the coolant hose.
7. Remove the retaining bolts.
8. Remove the fuel fired booster heater.
Remove the retaining bolts.
Installation
1. Install the fuel fired booster heater.
Install the retaining bolts.
2. Install the retaining bolts.
3. Connect the coolant hose.
Remove the hose clamp.
4. Connect the coolant hose.
Remove the hose clamp.
5. Attach the coolant hose.
6. Connect the fuel fired booster heater fuel line.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст