Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 603

19. Disconnect the roof opening panel motor electrical connector.

20. Disconnect the rear washer hose connector.

21. NOTE: Headliner shown removed for clarity.

Using a suitable adhesive tape, protect both front corners of the
headliner.

22. NOTE: Headliner shown removed for clarity.

Using a suitable adhesive tape, protect both rear corners of the
headliner.

23. CAUTIONS:

Make sure the headliner is not creased or folded where it is not

protected by adhesive tape. Failure to follow this instruction may result in
damage to the component.

Make sure the headliner is fully supported during removal. Failure to

follow this instruction may result in damage to the component.

W ith the aid of an assistant, remove the headliner.

Installation

1. To install, reverse the removal procedure.

2. NOTE: The liftgate weatherstrip must be replaced once removed.

Install a new liftgate opening weatherstrip.

Published: 11-May-2011

Interior Trim and Ornamentation - Liftgate Trim Panel

Removal and Installation

Removal

1. Detach the liftgate window glass weatherstrip.

2. Remove the liftgate window glass latch actuator finisher trim panel.

3. Remove the liftgate trim panel upper retaining screws.

4. Remove the liftgate latch actuator finisher trim panel.

5. Remove the liftgate finisher trim panel.

6. Deatch the liftgate trim panel.

7. Remove the liftgate trim panel.

Installation

1. To install, reverse the removal procedure.