Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 33
13. NOTE: Install a new retaining bolt.
Attach the steering column.
Install a new steering column lower retaining bolt.
Tighten to 25 Nm.
Published: 11-May-2011
Front Suspension - Front Wheel Bearing and Wheel Hub
Removal and Installation
Special Tool(s)
Front hub carrier support
204-310
Hub flange remover
204-116-03
Bearing remover
204-262
Hub carrier support
204-309
Bearing support
204-313
Bearing guide
204-312
Bearing installer
204-311
Bearing receiver
501-063
Removal
1. Remove wheel knuckle. For additional information refer to,
W heel
Knuckle
.
2. NOTE: W hen removing the wheel hub from the wheel knuckle the
bearing will be destroyed and the bearing inner ring will remain on the
wheel hub.
Using special tools, remove the wheel hub.
3. Using a suitable tool, remove the bearing inner ring.
4. Using special tools, remove the wheel bearing.
Installation
1. NOTE: Insert special tool 204-312 in to 204-309.
Support the wheel knuckle on special tools.
2.
CAUTION: Make sure wheel bearing is correctly orientated with the
colored side facing inboard.
Align the bearing over special tool.
3. Using special tools, press bearing into wheel knuckle.
4. NOTE: Change special tool 204-312 to 204-313.
Align the bearing and wheel knuckle over special tool.
5. Slide wheel hub over the guide and align to the bearing.
6. Using special tools install the wheel hub.
7. Install the wheel knuckle. For additional information, refer to
W heel
Knuckle
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст