Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 529
Published: 11-May-2011
Battery, Mounting and Cables - Battery Cables2.0L NA V6 - AJV6/2.5L NA V6 -
AJV6/3.0L NA V6 - AJ27
Removal and Installation
Removal
1. Disconnect the battery.
For additional information, refer to:
Battery Disconnect and Connect
(414-01 Battery, Mounting and Cables, General Procedures).
2. Detach the battery junction box positive cable.
Remove the retaining nut.
3. Remove the battery.
For additional information, refer to:
Battery
(414-01 Battery, Mounting
and Cables, Removal and Installation).
4. Remove the battery tray.
5. Detach the battery ground cable.
Remove the retaining bolt.
6. Remove the battery ground cable.
Remove the retaining bolt.
7. Detach the battery to starter motor solenoid cable cover.
8. Remove the battery to starter motor solenoid cable.
Remove the retaining nut.
9. Remove the air cleaner assembly.
For additional information, refer to:
Air Cleaner
(303-12A Intake Air
Distribution and Filtering - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA
V6 - AJ27, Removal and Installation).
10. Detach the wiring harness.
11. Detach the wiring harness.
12. Remove the air filter retaining bracket.
Remove the retaining nuts.
13. Detach the generator battery positive cable protective cover.
14. Remove the battery positive cable.
Detach the generator battery positive cable electrical connector.
Remove the retaining nut.
Installation
1. To install, reverse the removal procedure.
Tighten to 12 Nm.
2. Tighten to 6 Nm.
3. Tighten to 12 Nm.
4. Tighten to 25 Nm.
5. Tighten to 25 Nm.
6. Tighten to 4 Nm.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст