Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 136
14. Connect the engine coolant temperature (ECT) and fuel temperature
sensor (FTS) electrical connectors.
Published: 11-May-2011
Engine - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA V6 - AJ27 - Engine Front Cover
In-vehicle Repair
Removal
CAUTION: It is necessary to remove the engine in order to remove the engine front cover.
All vehicles
1. Using a suitable container drain the engine oil.
2. Remove the automatic or manual transmission. For additional
information, refer to Section
307-01A Automatic
Transmission/Transaxle
Section
307-01B Automatic
Transmission/Transaxle
or Section
308-03 Manual
Transmission/Transaxle
.
Vehicles with 2.5L or 3.0L engine
3. Detach the positive crank case ventilation hose.
Vehicles with 2.0L engine
4. Detach the positive crank case ventilation hose.
5. Disconnect the idle actuator control valve electrical connector.
6. Disconnect the throttle position sensor electrical connector.
7. Detach the cruise control cable.
8. Detach the throttle cable.
1. Reposition the throttle lever to the fully open position.
2. Detach the throttle cable.
9. Detach the throttle cable retaining bracket.
10. Detach the coolant hoses.
11. Disconnect the electrical connectors.
12. Detach the wiring harness.
Vehicles with 2.5L or 3.0L engine
13. Disconnect the electrical connectors.
14. Disconnect the electrical connectors.
15. Detach the wiring harness.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст