Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 618
5. Detach the safety belt lower anchor from the underside of the seat.
6. Remove the seat rear retaining bolt covers.
7. Remove the seat.
Remove the retaining bolts.
8. Disconnect the battery ground cable. For additional information, refer to
For additional information, refer to:
Battery Disconnect and Connect
(414-01 Battery, Mounting and Cables, General Procedures).
.
9. Disconnect the electrical connector.
Installation
1. To install, reverse the removal procedure.
Tighten to 20 Nm.
2. Tighten to 55 Nm.
3. Tighten to 20 Nm.
Published: 11-May-2011
Seating - Front Seat Backrest
Removal and Installation
Removal
1. Remove the front seat.
For additional information, refer to:
Front Seat
(501-10 Seating,
Removal and Installation).
2. Detach the outer side trim panel.
3. Detach the outer side trim panel.
4. Detach the outer side trim panel.
5. Remove the outer side trim panel.
Disconnect the electrical connectors.
6. Detach the inner side trim panel.
7. Remove the inner side trim panel.
8. Remove and discard the cable tie.
9. Detach the recliner motor electrical connector.
10. Disconnect the recliner motor electrical connector.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст