Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 167
101. Using the special tool, remove and discard the link shaft oil seal.
All vehicles
102. Remove the starter motor.
103. Remove the dust cover.
104. Remove the access cover.
105. NOTE: Rotate the torque converter to gain access to the remaining
retaining bolts.
Remove the torque converter retaining bolts.
106. Remove the transaxle retaining bolts.
107. Remove the transaxle retaining bolts.
108. Remove the transaxle retaining bolts.
109. Remove the transaxle retaining bolts.
110.
W ARNING: Do not let the torque converter drop out of the
transaxle. Failure to follow this instruction may result in personal injury.
Remove the transaxle.
Published: 11-May-2011
Engine - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA V6 - AJ27 - Engine
Disassembly
Special Tool(s)
Wrench strap-universal
303-D055
Crankshaft Pulley Remover
303-D121
Crankshaft Pulley Installer
303-102
Trust Pad
303-D121-01
Crankshaft pulley installer
303-335/2
Disassembly
1. Disconnect the throttle motor electrical connector.
2. Disconnect the throttle position sensor.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст