Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 609
Published: 11-May-2011
Exterior Trim and Ornamentation - Rear SpoilerWagon
Removal and Installation
Removal
1. Remove and discard the tailgate opening window finisher trim panel.
2. Remove the rear spoiler retaining nuts.
3. Detach the rear spoiler.
4. Remove the rear spoiler.
Disconnect the high mounted stoplamp electrical connector.
Disconnect the rear washer jet hose.
Installation
1. NOTE: A new tailgate opening window finisher trim panel must be
installed.
To install, reverse the removal procedure.
Tighten to 5 Nm.
Published: 11-May-2011
Exterior Trim and Ornamentation - Rocker Panel Moulding
Removal and Installation
Removal
1. Remove the rocker panel moulding retaining screws.
2. NOTE: Both doors will need to be open to remove the rocker panel
moulding.
Remove the rocker panel moulding.
Installation
1. To install, reverse the removal procedure.
Published: 11-May-2011
Exterior Trim and Ornamentation - Roof Rail
Removal and Installation
Removal
1. NOTE: Using a suitable tie strap remove the roof rail front trim.
Remove the roof rail front trim.
2. Remove the roof rail front retaining bolts.
3. NOTE: Using a suitable tie strap remove the roof rail rear trim.
Remove the roof rail rear trim.
4. NOTE: Remove and discard the seals.
Remove the roof rail.
Installation
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст