Jaguar XJ (X350). Service manual — part 1512

7 . Remove the ashtray.

Disconnect the electrical connector.

8 . Remove the floor console register duct.

1) Remove the retaining nut.

2) Remove the floor console register duct.

9 . Detach the floor console wiring harness retaining bracket.

10 .

CAUTION: Make sure damage does not occur to the interior trim.

Reposition the floor console retaining bracket.

11 .

CAUTION: Make sure damage does not occur to the interior trim.

NOTE:

Reposition the floor console bracket.

Disconnect the transmission selector switch electrical connector.

12 . Disconnect the lateral/yaw rate sensor electrical connector.

13 . NOTE:

Reposition the floor carpet.

Detach the wiring harness ground connector.

www.

14 . Detach the wiring harness from the instrument panel retaining bracket.

15 . Disconnect the electrical connector.

16 . Remove the retaining bolt.

17 . Remove the instrument panel retaining bracket.

18 . Remove the retaining bolt.

19 . Remove the instrument panel retaining bracket.

20 . Remove the floor console adaptor duct retaining clip.

21 . NOTE:

Left-hand shown, right-hand similar.

Remove the cowl side trim panels.

www.