Jaguar XJ (X350). Service manual — part 79

11 . Remove the circlip.

12 . Using the special tools, remove the bearing from the wheel knuckle.

Installation

1

.

CAUTION: The final tightening of the rear suspension components must be carried

out with the vehicle on its wheels.

Using the special tools, install the bearing to the wheel knuckle.

2 . Install the circlip.

3 . Using the special tools, install the wheel hub to the bearing.

4 . Install the wheel knuckle assembly.

Tighten to 90 Nm.

5

.

NOTE:

Using the old wheel hub nut tighten to 150 Nm.

NOTE:

Remove and discard the old wheel hub nut, install a new wheel hub nut tighten to 150

www.

Nm.

Attach the wheel knuckle to the halfshaft.

6 . Install the lower arm to the wheel knuckle.

7 . Install the outer tie rod retaining bolt.

8 . Install the ABS sensor.

Tighten to 10 Nm.

9

.

Install the brake disc.

For additional information, refer to

For additional information, refer to

For additional information, refer to

Brake Disc - Vehicles With: High Performance Brakes, VIN

Range: G00442->G45703 (70.10.10)

For additional information, refer to

Brake Disc - Vehicles With: High Performance Brakes, VIN

Range: G45704->G99999 (70.10.10)

10 . Tighten the wheel hub nut.

Tighten to 300 Nm.

11

.

CAUTION: The final tightening of the rear suspension components must be carried

out with the vehicle on its wheels.

Tighten to 150 Nm.

www.