Jaguar XJ (X350). Service manual — part 428

9 . NOTE:

Vehicles with supercharger shown, vehicles without supercharger similar.

Connect the AIR control valve to exhaust manifold tube.

Tighten to 35 Nm.

Vehicles with supercharger

10 . Install the supercharger belt tensioner.

Tighten to 40 Nm.

11 . Install the supercharger belt idler pulley and bracket assembly.

Tighten to 9 Nm.

All vehicles

12 . Install the accessory drive belt idler pulley.

Tighten to 61 Nm.

13 . Install the power steering pump.

Tighten to 25 Nm.

www.

14 . NOTE:

Remove the blanking caps.

Connect the power steering pump to steering gear high-pressure line.

Install a new O-ring seal.

Tighten to 25 Nm.

15 . Raise the vehicle.

16 . Connect the AIR control valve to exhaust manifold tube.

Tighten to 35 Nm.

17 . Install the power steering pump lower retaining bolts.

Tighten to 25 Nm.

18 . NOTE:

Remove the blanking caps.

Connect the power steering reservoir to power steering pump supply line.

19

.

Install the A/C compressor.

For additional information, refer to Air Conditioning (A/C) Compressor - 3.5L/4.2L, VIN

Range: G45704->G99999 (82.10.20)

20 . Install the water pump pulley.

Using a suitable tool, retain the water pump pulley.

Tighten to 10 Nm + 45°.

www.