Jaguar XJ (X350). Service manual — part 723
10 . Remove the turbocharger heatshield.
11 . Remove the turbocharger support bracket.
12 . Disconnect the oil return tube from the turbocharger.
Remove and discard the gasket.
13 . Remove the oil return tube retaining plate.
14 . Remove the oil return tube.
Remove and discard the O-ring seal.
15 . Disconnect the turbocharger solenoid electrical connector.
16 . Disconnect the turbocharger oil supply tube.
Remove and discard the sealing washer.
17 . Remove the turbocharger.
Remove and discard the turbocharger retaining nuts.
Remove and discard the turbocharger to exhaust manifold retaining studs.
www.
Installation
1 . To install, reverse the removal procedure.
Install new turbocharger to exhaust manifold retaining studs.
Install new turbocharger retaining nuts.
Tighten to 23 Nm.
2 . Tighten to 30 Nm.
Install a new sealing washer.
3 . Tighten to 10 Nm.
Install a new O-ring seal.
4 . Tighten to 10 Nm.
Install a new gasket.
5 . Tighten to 23 Nm.
6 . Tighten to 10 Nm.
7 . Tighten to 90 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст