Jaguar XJ (X350). Service manual — part 553

2 .

CAUTION: Tighten the flexplate securing bolts in three stages.

Tighten the flexplate securing bolts.

Stage 1: Tighten to 50 Nm.

Stage 2: Tighten to 45 degrees.

Stage 3: Tighten to 45 degrees.

3 . Install the transmission.

For additional information, refer to

Oil Filter Element (12.60.02)

Special Service Tools

Remover - oil filter

303-1128

Removal

1 . Remove the oil filler cap.

2 . Remove the engine cover.

3 . Install the engine oil filler cap to prevent foreign material entering the valve cover.

4

.

NOTE:

Remove and discard the O-ring seal.

Remove the oil filter element housing.

www.

Rotate the oil filter element housing five complete turns counter-

clockwise.

Allow the engine oil to drain from the oil filter element housing for two

minutes.

Remove the oil filter element housing.

5 . Using the special tool, remove the oil filter element.

Installation

1 . Install the oil filter element.

2 . NOTE:

Install a new O-ring seal.

Install the oil filter element housing.

Tighten to 25 Nm.

3 . Remove the engine oil filler cap.

4 . Install the engine cover.

5 . Install the oil filler cap.

www.