Jaguar XJ (X350). Service manual — part 733
Installation
1 . To install, reverse the removal procedure.
Tighten to 47 Nm.
Fuel Injection Pump Belt
Removal
1 . Disconnect the battery ground cable.
For additional information, refer to Battery Disconnect and Connect
2 . Remove the secondary bulkhead centre panel.
For additional information, refer to Secondary Bulkhead Center Panel
3 . Remove the fuel injection pump belt cover.
4 . Remove and discard the fuel injection pump belt tensioner.
5 . Note the direction of rotation of the fuel injection pump belt.
www.
6 . Remove and discard the fuel injection pump belt.
Installation
1
.
NOTE:
The fuel injection pump rotates in an anti-clockwise direction when viewed from the
rear of the engine.
Note the direction of rotation of the new fuel injection pump belt.
2
.
CAUTION: Do not install the fuel injection pump belt to the pulleys with the fuel
injection pump belt tensioner installed. Failure to follow this instruction may result in
damage to the fuel injection pump drive belt.
NOTE:
Make sure the fuel injection pump belt is correctly seated on to the fuel injection pump
drive pulleys.
Install a new fuel injection pump belt.
3
.
CAUTION: Make sure the fuel injection pump belt tensioner is correctly located in to
the fuel injection pump cover backplate. Failure to follow this instruction may result in
damage to the components.
Install the fuel injection pump belt tensioner.
Locate the tang on the new fuel injection pump belt tensioner in to the fuel
injection pump cover backplate.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст