Jaguar XJ (X350). Service manual — part 1238

Auxiliary Footwell Vent/Duct Blend Door
Actuator

Removal

1

.

Remove the floor console.

For additional information, refer to Floor Console - Vehicles With: Auxiliary Climate Control

(76.25.01)

2

.

CAUTION: Make sure no damage occurs to the auxiliary temperature blend door

actuator link rod.

Detach the footwell vent/duct blend door actuator link rod.

3 . Disconnect the footwell vent/duct blend door actuator electrical connector.

4 . Remove the footwell vent/duct blend door actuator.

Remove the footwell vent/duct blend door actuator retaining screws.

Installation

1 . To install, reverse the removal procedure.

www.

Auxiliary Heater Core and Evaporator
Core Housing

Removal

1

.

Carry out the air conditioning (A/C) system recovery procedure.

For additional information, refer to Air Conditioning (A/C) System Recovery, Evacuation and

Charging (82.30.30)

2 . Remove the heater core.

For additional information, refer to Heater Core

3 . Disconnect the auxiliary heater core and evaporator core housing electrical connector.

4 . NOTE:

Remove and discard the auxiliary evaporator outlet and inlet line O-ring seals.

Detach the auxiliary evaporator outlet and inlet lines.

Remove the auxiliary evaporator outlet and inlet line retaining bolts.

5 . Remove the auxiliary heater core and evaporator core housing retaining nut.

6 . Remove the auxiliary heater core and evaporator core housing retaining nut.

7

.

Remove the auxiliary heater core and evaporator core housing.

Remove the auxiliary heater core and evaporator core housing retaining

nut.

Installation

1 . Install the auxiliary heater core and evaporator core housing.

www.