Jaguar XJ (X350). Service manual — part 55

27 . NOTE:

Left-hand shown, right-hand similar.

Remove the front subframe rear retaining bolt.

28 . Lower the special tool by approximately 200 mm (7.9 in).

29 . NOTE:

Left-hand shown, right-hand similar.

Remove the stabilizer bar clamp.

30 . Remove the stabilizer bar.

Installation

1 . Install the stabilizer bar

2 . NOTE:

Left-hand shown, right-hand similar.

Install the stabilizer bar clamp.

Tighten to 55 Nm.

3 . Using the special tool, install the front subframe.

www.

4 . Check the front subframe alignment.

<<502-00>>

5 . NOTE:

Left-hand shown, right-hand similar.

Install the front subframe front retaining bolt.

Tighten to 200 Nm.

6 . NOTE:

Left-hand shown, right-hand similar.

Install the front subframe rear retaining bolt.

Tighten to 115 Nm.

7 . Remove the special tool.

8 . NOTE:

Left-hand shown, right-hand similar.

Attach the engine mount.

Tighten to 55 Nm.

9 . NOTE:

Left-hand shown, right-hand similar.

Attach the air spring assembly.

Tighten to 175 Nm.

www.