Jaguar XJ (X350). Service manual — part 529
For additional information, refer to Secondary Bulkhead Center Panel
45 . Fill the power steering fluid reservoir and bleed the system.
For additional information, refer to Power Steering System Bleeding (57.15.02 )
46 . Connect the battery ground cable.
For additional information, refer to Battery Connect (86.15.15)
In vehicle repair
Camshaft Front Seal
Special Service Tools
Holder - camshaft pulleys front
303-1124
Installer - camshaft oil seal
303-1119
Remover - camshaft oil seal
303-1118
Timing pin - camshaft pulleys
303-1126
Removal
1 . Remove the timing belt.
For additional information, refer to Timing Belt
www.
2 . Remove the special tool.
1) Retain the camshaft pulley.
2) Remove the special tool.
3 . Remove the camshaft pulley.
Remove the camshaft pulley retaining bolts.
4 . NOTE:
Discard the camshaft pulley hub retaining bolt.
Using special tool, remove the camshaft pulley hub.
Remove the camshaft pulley hub retaining bolt.
5 . Install the special tool to the camshaft.
6
.
CAUTION: Make sure the special tool is correctly seated behind the camshaft seal.
Failure to follow this instruction may result in damage to the special tool.
Install the special tool into the camshaft front seal.
7 . Install the special tool extracting bolt.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст