Jaguar XJ (X350). Service manual — part 434

2 . Install the right-hand exhaust manifold heat shield/gasket retaining bolt.

Tighten to 50 Nm.

3 . Attach the exhaust gas recirculation (EGR) valve.

Install new retaining nuts and a new gasket.

Tighten to 22 Nm.

4 . Install the right-hand exhaust manifold heat shield

Tighten to 3 Nm.

5 . Install the exhaust system. <<309-00>>

www.

Exhaust Manifold RH - VIN Range:
G45704->G99999 (30.15.56)

Removal

Right-hand drive vehicles

1 . Center the steering wheel.

Lock in position, remove the ignition key.

All vehicles

2 . Remove the right-hand exhaust manifold heat shield upper retaining bolts.

3 . Remove the right-hand catalytic converter.

For additional information, refer to Catalytic Converter - 3.0L/3.5L/4.2L (17.50.05)

Right-hand drive vehicles

4 . Remove the steering gear coupling upper pinch bolt

5 . Remove the steering gear coupling.

Remove the steering gear coupling lower pinch bolt.

All vehicles

6 . Remove the right-hand exhaust manifold heat shield.

7 . Disconnect the secondary air injection (AIR) control valve to exhaust manifold tube.

8 . NOTE:

Engine shown removed for clarity.

Detach the exhaust gas recirculation (EGR) valve.

www.