Jaguar XJ (X350). Service manual — part 969
3
.
NOTE:
For NAS vehicles only.
If required, carry out a short drive cycle.
For additional information, refer to Powertrain Control Module (PCM) Short Drive Cycle Self-
Test
Manifold Absolute Pressure (MAP) Sensor -
4.2L NA V8 - AJV8 (18.30.86)
Removal
1 . Remove the intake manifold.
For additional information, refer to Intake Manifold - VIN Range: G00442->G45703 (30.15.01)
For additional information, refer to Intake Manifold - VIN Range: G45704->G99999 (30.15.01)
2 . Remove the manifold absolute pressure (MAP) sensor.
Installation
1 . To install, reverse the removal procedure.
Tighten to 10 Nm.
2 . NOTE:
For NAS vehicles only.
www.
Mass Air Flow (MAF) Sensor (18.30.15)
Removal
1 . Remove the mass airflow (MAF) sensor.
1) Disconnect the MAF sensor electrical connector.
2) Remove the mass airflow MAF sensor.
Installation
1 . To install, reverse the removal procedure.
Tighten to 2 Nm.
2
.
NOTE:
For NAS vehicles only.
If required, carry out a short drive cycle.
For additional information, refer to Powertrain Control Module (PCM) Short Drive Cycle Self-
Test
Oil Temperature Sensor (18.31.01)
Removal
1 . Remove the air deflector.
For additional information, refer to
2 . Disconnect the oil temperature sensor electrical connector.
3 . Remove the oil temperature sensor.
Installation
1
.
NOTE:
Apply a small bead of sealant meeting Jaguar specification on the first three threads of
the oil temperature sensor.
To install, reverse the removal procedure
Tighten to 15 Nm.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст