JAC S2. Instruction — part 7
Interior Trim
Interior Trim 85
V、Tail Door Threshold Assembly
(I)Removal
1. Remove tail door threshold assembly
1). Open trunk cover, and take out spare tire cover plate;
2). Remove 5 expansion buckles of tail door threshold
assembly;
3). Pry buckles connecting to tail door threshold assembly and
vehicle body;
4). Take down tail door threshold assembly;
(II)Installation
1. Install tail door threshold assembly
1). Remove contact part of tail door sealing strip and tail door
threshold assembly, place tail door threshold assembly to
installation position, tighten buckles;
2). Install 5 expansion buckles of tail door threshold assembly,
and install tail door sealing strip;
3). Install spare tire cover plate and close trunk cover;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interior Trim
Interior Trim 86
VI、Lower Trim Panel Assembly of A Pillar
(I)Removal
1. Remove front door threshold guard panel assembly Refer to "Front door threshold guard panel assembly"
2. Remove lower trim panel assembly of A pillar
1). Pry opening handle fastener of engine compartment cover
in lower trim panel of A pillar;
2). Pry 2 buckles connecting lower trim panel of A pillar and
vehicle body metal sheet, and take down lower trim panel
of A pillar;
(II)Installation
1. Install Lower trim panel assembly of A pillar
1). Remove contact part of door frame rubber strip of front side
vehicle door and lower trim panel assembly of A pillar,
and place lower trim panel assembly of A pillar to
installation position, tighten buckles, and install door
frame rubber strip of front side vehicle door;
2). Place opening handle fastener of engine compartment cover
to installation position, and tighten buckles;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interior Trim
Interior Trim 87
2. Install front door threshold guard panel assembly
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interior Trim
Interior Trim 88
VII、Upper Trim Panel Assembly of A Pillar
(I)Removal
1. Remove upper trim panel assembly of A pillar
1). Pry plastic buckles and steel buckles connecting upper tirm
panel assembly of A pillar and vehicle body metal sheet;
2). Take down upper trim panel assembly of A pillar;
△ Note Don’t damage2 limiting position clamp angle in
lower part of upper trim panel assembly of A pillar.
(II)Installation
1. Install upper trim panel assembly of A pillar
1). Remove contact part of door frame rubber strip of front side
vehicle door and upper trim panel assembly of A pillar,
insert 2 limiting position clamp angle in lower part of
upper trim panel assembly of A pillar to matching groove,
align plastic buckles and steel buckles of upper trim panel
assembly of A pillar to open hole of vehicle body metal
sheet, press in and tighten, and install door frame rubber
strip of front side vehicle door;
△ Note When installing buckles of upper trim panel
assembly of A pillar, first tighten plastic buckles of upper
part of upper trim panel assembly of A pillar, and tighten
steel buckles.
△ Note
Method of removal and installation of left and
right upper trim panel assembly of A pillar are the same.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interior Trim
Interior Trim 89
VIII、Lower Trim Panel Assembly of B Pillar
(I)Removal
1. Remove front door threshold guard panel assembly Refer to "Front door threshold guard panel assembly"
2. Remove rear threshold guard panel assembly Refer to "Rear threshold guard panel assembly"
3. Remove lower trim panel assembly of B pillar
1). Pry buckles connecting lower trim panel assembly of B
pillar and vehicle body;
2). Take down lower trim panel assembly of B pillar;
△ Note
It needs to adjust front seat position when
removing lower trim panel assembly of B pillar to be
convenient to remove lower trim panel assembly of B
pillar.
(II)Installation
1. Install lower trim panel assembly of B pillar
1). Remove contact part of door frame rubber strip of front/rear
door side vehicle door and lower trim panel assembly of B
pillar, place lower trim panel assembly of B pillar to
installation position, tighten buckles, and install door
frame rubber strip of front/rear door side vehicle door;
2. Install rear threshold guard panel assembly
3. Install front door threshold guard panel assembly
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interior Trim
Interior Trim 90
IX、Upper Trim Panel Assembly of B Pillar
(I)Removal
1. Remove front door threshold guard panel assembly Refer to "Front door threshold guard panel assembly"
2. Remove rear threshold guard panel assembly Refer to "Rear threshold guard panel assembly"
3. Remove lower trim panel assembly of B pillar Refer to "Lower trim panel assembly of B pillar"
4. Remove upper trim panel assembly of B pillar
1). Move trim cover in lower fixed point of safety belt upward
along fabric belt, and expose whole lower fixed point, and
then remove fixed bolt of lower fixed point;
2). Pry 3 buckles connecting upper trim panel assembly of B
pillar and vehicle body;
3). Take down upper trim panel assembly of B pillar;
(II)Installation
1. Install upper trim panel assembly of B pillar
1). Cross removed end of safety belt to upper trim panel
assembly of B pillar;
2). Remove contact part of door frame rubber strip of front/rear
side vehicle door and upper trim panel assembly of B
pillar, place upper trim panel assembly of B pillar to
installation position, tighten buckles, and install door
frame rubber strip of front/rear side vehicle door;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interior Trim
Interior Trim 91
3). Tighten lower fixed bolt of safety belt;
Tighten torque
45~55N·m
2. Install lower trim panel assembly of B pillar
3. Install rear threshold guard panel assembly
4. Install front door threshold guard panel assembly
X、Lower Trim Panel Assembly of C Pillar
(I)Removal
1. Remove rear threshold guard panel assembly Refer to "Rear threshold guard panel assembly"
2. Remove rear seat cushion assembly Refer to "Rear seat cushion assembly"
3. Remove rear seat backrest assembly Refer to "Rear seat backrest assembly"
4. Remove lower fixed bracket assembly of rear seat backrest
1). Remove 2 fixed bolts connecting lower fixed bracket
assembly of rear seat backrest and vehicle body;
2). Take down lower fixed bracket assembly of rear seat
backrest;
5. Remove lower trim panel assembly of C pillar
1). Remove 2 fixed bolts connecting lower trim panel assembly
of C pillar and vehicle body;
2). Pry connection of lower trim panel assembly of C pillar and
vehicle body;
3). Take down lower trim panel assembly of C pillar;
(II)Installation
1. Install lower trim panel assembly of C pillar
1). Remove contact part of door frame rubber strip of rear side
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interior Trim
Interior Trim 92
vehicle door and lower trim panel assembly of C pillar,
place lower trim panel assembly of C pillar to installation
position, and tighten buckles;
2). Tighten 2 fixed bolts connecting to lower trim panel
assembly of C pillar and vehicle body;
3). Install door frame rubber strip of rear side vehicle door;
2. Install lower fixed bracket assembly of rear seat backrest
1). Place lower fixed bracket assembly of rear seat backrest to
installation position;
2). Tighten 2 fixed bolts connecting fixed bracket and vehicle
body;
Tighten torque
22~29N·m
3. Install rear seat backrest assembly
4. Install rear seat cushion assembly
5. Install rear door threshold panel
XI、Upper Trim Panel Assembly of C Pillar
(I)Remove
1. Remove rear threshold guard panel assembly Refer to "Rear threshold guard panel assembly"
2. Remove rear seat cushion assembly Refer to "Rear seat cushion assembly"
3. Remove rear seat backrest assembly Refer to "Rear seat backrest assembly"
4. Remove lower fixed bracket assembly of rear seat backrest Refer to " Lower trim panel assembly of C pillar"
5. Remove lower trim panel assembly of C pillar Refer to "Lower trim panel assembly of C pillar"
6. Remove upper trim panel assembly of C pillar
1). Remove fixed bolt of lower fixed point of rear safety belt;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interior Trim
Interior Trim 93
2). Remove 2 fixed bolt connecting upper trim panel assembly
of C pillar and vehicle body;
3). Pry 8 buckles connecting upper trim panel assembly of C
pillar and vehicle body;
4). Disconnect connection of trunk light and upper trim panel
assembly of C pillar;
5). Take down upper trim panel assembly of C pillar;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interior Trim
Interior Trim 94
(II)Installation
1. Install upper trim panel assembly of C pillar
1). Connect connection of upper trim panel assembly of C
pillar and trunk light;
2). Remove contact part of door frame rubber strip of rear side
vehicle door, tail door sealing strip and upper trim panel
assembly of C pillar, place upper trim panel assembly of
C pillar to installation position, and tighten buckles;
3). Tighten 2 fixed bolts, and install door frame rubber strip of
rear side vehicle door and tail door sealing strip;
4). Tighten lower fixed point bolt of rear safety belt;
Tighten torque
45~55N·m
2. Install lower trim panel assembly of C pillar
3. Install lower fixed bracket assembly of rear seat backrest
4. Install rear seat backrest assembly
5. Install rear seat cushion assembly
6. Install rear door threshold guard panel assembly
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interior Trim
Interior Trim 95
XII、Front Door Inclined Handle
(I)Removal
1. Remove front door inclined handle
1). Pry outer panel of front door inclined handle assembly;
2). Remove 7 fixed bolts of inner panel of front door inclined
handle;
3). Take down front door inclined handle;
(II)Installation
1. Install front door inclined handle
1). Place front door inclined handle to installation position;
2). Tighten 7 fixed bolts of front door inclined handle;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interior Trim
Interior Trim 96
3). Place outer panel of front door inclined handle to
installation position;
4). Tighten buckles;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interior Trim
Interior Trim 97
XIII、Front Door Handle
(I)Removal
1. Open engine compartment cover
2. Disconnect battery negative electrode
3. Remove front door inclined handle Refer to "Front door inclined handle"
4. Remove front door handle
1). Pry connection of front door handle and front door trim
panel;
2). Disconnect wiring harness connector, and take down front
door handle;
(II)Installation
1. Install front door handle
1). Install wiring harness connector;
2). Place front door handle to installation position of vehicle
door, and tighten buckles;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interior Trim
Interior Trim 98
2. Install front door inclined handle
3. Connect battery negative electrode
4. Close engine compartment cover
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interior Trim
Interior Trim 99
XIV、Front Door Trim Panel Assembly
(I)Removal
1. Open engine compartment cover
2. Disconnect battery negative electrode
3. Remove front door triangle window cover plate assembly
1). Pry buckles connecting front door triangle window cover
plate and front door metal sheet;
2). Take down front door triangle window cover plate
assembly;
4. Remove front door trim panel assembly
1). Pry inner handle bolt cover of front door;
2). Remove fixed bolt in bolt cover;
3). Pry outer panel of inclined handle and take down outer
panel of inclined handle;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Interior Trim
Interior Trim 100
4). Remove 3 fixed bolt
① connecting inner panel of inclined
handle and front vehicle door;
5). Remove 2 fixed bolts connecting lower part of front door
trim panel assembly and front vehicle door;
6). Pry 8 buckles connecting front door trim panel and vehicle
body;
7). Disconnect opening handle wiredrawing and inner lock
handle wiredrawing in front door;
8). Disconnect connecting wiring harness of window regulator
device main control switch;
9). Take down front door trim panel assembly;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст