Engine JAC HFC4DA1-2C. Service manual — part 196
SE
SE
SE
SE Seats
Seats
Seats
Seats
- 117 -
Removal/Installation
Removal/Installation
Removal/Installation
Removal/Installation
Sliding
Sliding
Sliding
Sliding rail
rail
rail
rail and
and
and
and seat
seat
seat
seat
1.
Push the sliding rail rearwards and remove four
mounting bolts.
2.
Pull the sliding rail forwards and remove three
mounting bolts on the rear part.
3.
Take down the sliding rail assembly.
SE
SE
SE
SE Seats
Seats
Seats
Seats
- 118 -
Removal/Installation
Removal/Installation
Removal/Installation
Removal/Installation (continued)
(continued)
(continued)
(continued)
Sliding
Sliding
Sliding
Sliding rail
rail
rail
rail and
and
and
and seat
seat
seat
seat
1.
Install the sliding rail onto the vehicle and install
seven mounting bolts in reverse order of removal.
2.
Install the seat onto sliding rail and tighten two
mounting nuts on the left side.
3.
Tighten two mounting nuts on the right side in the
same way and tighten nuts on both sides to the
specified torque.
Tightening torque: 45~55N.m
SE
SE
SE
SE Seats
Seats
Seats
Seats
- 119 -
Removal/Installation
Removal/Installation
Removal/Installation
Removal/Installation
Front
Front
Front
Front row
row
row
row twin
twin
twin
twin bench-type
bench-type
bench-type
bench-type seat
seat
seat
seat
Removal
1.
Remove four mounting bolts below front row seat.
2.
Remove the front row twin bench-type seat from
vehicle.
Installation
1.
Install the front row seat in reverse order of
removal.
Note:
Bolts should be tightened to the specified torque.
Tightening torque: 45~55N.m
SE
SE
SE
SE Seats
Seats
Seats
Seats
- 120 -
Removal/Installation
Removal/Installation
Removal/Installation
Removal/Installation
Front
Front
Front
Front row
row
row
row individual
individual
individual
individual seat
seat
seat
seat
Removal
1.
Remove four mounting bolts below front row seat.
2.
Remove the front row individual seat from vehicle.
Installation
1.
Install the front row individual seat in reverse order
of removal.
Note:
Bolts should be tightened to the specified torque.
Tightening torque: 45~55N.m
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст