Engine JAC HFC4DA1-2C. Service manual — part 183
BP
BP
BP
BP Interior/Exterior
Interior/Exterior
Interior/Exterior
Interior/Exterior Trims
Trims
Trims
Trims
- 65 -
Removal/Installation
Removal/Installation
Removal/Installation
Removal/Installation (Continued)
(Continued)
(Continued)
(Continued)
Instrument
Instrument
Instrument
Instrument panel
panel
panel
panel
17. Remove four mounting screws of audio.
18. Disconnect the harness connector of audio.
19. Remove the lower cover of instrument panel.
20. Remove the glove box.
BP
BP
BP
BP Interior/Exterior
Interior/Exterior
Interior/Exterior
Interior/Exterior Trims
Trims
Trims
Trims
- 66 -
Removal/Installation
Removal/Installation
Removal/Installation
Removal/Installation (Continued)
(Continued)
(Continued)
(Continued)
Instrument
Instrument
Instrument
Instrument panel
panel
panel
panel
21. Loosen two mounting screws of instrument panel.
22. Remove the mounting bolt on the left side of
instrument panel.
23. Remove the mounting bolt on the right side of
instrument panel.
Note:
Note:
Note:
Note:
There are three mounting screws on instrument
panel in total, respectively on the left, middle and
right part.
24. Remove two mounting bolts on the left side of
instrument panel.
BP
BP
BP
BP Interior/Exterior
Interior/Exterior
Interior/Exterior
Interior/Exterior Trims
Trims
Trims
Trims
- 67 -
Removal/Installation
Removal/Installation
Removal/Installation
Removal/Installation (Continued)
(Continued)
(Continued)
(Continued)
Instrument
Instrument
Instrument
Instrument panel
panel
panel
panel
25. Remove two mounting bolt on the right side of
instrument panel.
26. Remove the shift lever.
27. Remove
the
mounting
bolts
for
shift
lever
assembly.
28. Remove the instrument panel carefully.
Note:
Note:
Note:
Note:
Two service persons are necessary for removal of
instrument panel.
BP
BP
BP
BP Interior/Exterior
Interior/Exterior
Interior/Exterior
Interior/Exterior Trims
Trims
Trims
Trims
- 68 -
Removal/Installation
Removal/Installation
Removal/Installation
Removal/Installation
Instrument
Instrument
Instrument
Instrument panel
panel
panel
panel
Installation
1.
During the installation of instrument panel, the
clock spring should be installed under the premise
that the wheels face forward and it should be
rotated clockwise until rotation disabled (rotating
with proper force instead of using too much force),
and then rotated counterclockwise by three circles
with centering triangle marks aligned.
2.
Install other parts in reverse order of removal.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст