JAC S1. Service manual — part 13
cool place, and be done frequently.
Dirt may produce abrasive function
and can damage the surface. Con鄄
taminated air or acid rain can dam鄄
age the painting and trims. In coastal
area where there is saline substance
on ground or chemicals in the dust,
special attention should be paid to
the maintenance of the vehicle bot鄄
tom. The dust and dirt can be re鄄
moved by lifting the vehicle. After
driving on a muddy road in winter,
determine that all dirt at the vehicle
bottom has been removed.
Use steam to clean the mud accu鄄
mulated at vehicle bottom. Refer to
the cleaning guide for vehicle and
instructions of manufacturer. Never
use soap, chemical cleaning agent
or hot water. Use clean sponge or
cloth. Never rub with excessive force
to avoid damage to accessories. For
any stain that cannot be removed
one time, wet it first, and clean it af鄄
ter a period of time. To clean wheels
with white sidewall, use a hard brush
or wire washer with soap. To clean a
plastic wheel hood, use clean
sponge or soft cloth. To clean an a鄄
luminum alloy wheel, use mild soap
or a natural cleaning agent. Never
use an abrasive cleaning agent.
Metallic surfaces should be protect鄄
ed, polished and waxed. As alu鄄
minum is likely got corroded, special
care should be taken to protect alu鄄
minum alloy wheels in winter. If the
vehicle has run on a saline road,
wash the wheels afterwards. Rinse
the wheel immediately after washing.
Soap solution dried on the surface
will leave strips. When it is mild and
the humidity is low,
rinse each part immediately after
washing to prevent strips. After rins鄄
ing, dry the vehicle with wet antelope
skin or soft and moisture absorbing
cloth. If it is not dried, a vehicle run鄄
ning with water on surface may leave
strips on it. Never crunch your vehi鄄
cle with any object as this will dam鄄
age the protection layer.Any scratch鄄
ing or denting on painted surface
should be mended with original paint
to prevent rusting. To protect the
painting and prevent rusting, clean
your vehicle at least once a month.
Rust prevention and appearance caring
94
Special care should be taken to re鄄
moving saline, mud and other dirt on
the mudguard.Causes to paint dam鄄
age may be tar, attachments, resin,
insect, bird excrement and other
stain dropped on the painted surface
during rapid running of the vehicle. If
such stain cannot be completely re鄄
moved with fresh water, use mild
soap. The surface must be rinsed
after washing with soap. Never let
soap solution dry up on the painted
surface.
Cleaning of stain
Do not use gasoline, powerful clean鄄
ing agent or corrosive agent, as they
may damage the protection layer.
Use dry cloth dipped with lubricating
oil or a bug and tar cleaner to re鄄
move tar. Use lukewarm water and
mild soap or vehicle cleaning agent
to remove insect or resin. If the
painted surface has lost brightness,
use a special vehicle polishing a鄄
gent.
Polishing and waxing
Wash and dry your vehicle before
polishing or waxing or applying gen鄄
eral cleaning agent or waxing agent.
Use qualified products and follow the
instructions of manufacturer.
Re-waxing
When water beads have formed on
the painted surface and extend to
large areas, it is necessary to polish
and wax the vehicle again.
Maintenance of vehicle bumper
Special preventive measures should
be taken for the bumper of JAC ve鄄
hicle, as described below:
音 Take care not to spill electrolytic
liquid or braking liquid onto the
bumper. If it takes place, wash it with
fresh water.
音 Wipe the bumper surface gently
during washing. The bumper is made
of plastics and its surface may be
damaged by wiping with excessive
force. Use lukewarm water and mild
soap or vehicle cleaning agent.
音 Never expose the bumper to high
temperature. For example, in case of
re -painting, the bumper should be
removed first, to prevent adverse ef鄄
fect of high temperature in the paint鄄
ing chamber on the bumper.
Maintenance of internal decora鄄
95
96
tion
Internal decoration made of nylon
fabrics.
To clean such internal decoration,
first remove the dirt and dust with a
vacuum cleaner. Then, use neutral
soap solvent or cleaning agent, and
clean sponge, soft cloth and clean
water. After using these tools, wait
for several seconds, and use wet
sponge and cloth to wipe off the dirt.
If it is still not cleaned, repeat this
work until the dirt is completely
cleaned.Never use gasoline,a clean鄄
ing agent not recommended, paint
rosin oil or other unsuitable cleaning
product.
Leather internal decoration
For cleaning of leather internal deco鄄
ration, dust and dirt has to be
cleaned as with other materials. But
take care about the leather surface to
avoid damaging the leather. High
quality leather needs good caring
and periodical cleaning. Dirt can be
removed completely using soap and
clean water, and to keep a glossy
and beautiful leather surface. Use
coarse cotton cloth, mild soap and
lukewarm water, and rinse off soap
foam. After wiping with wet cloth, re鄄
move the moisture from leather sur鄄
face with soft cloth. When the leather
is dirty, do the cleaning promptly.
Oiling has been done in the leather
processing, therefore it is not neces鄄
sary to oil the leather again. Oil ap鄄
plied onto leather surface cannot
provide effective protection, and
therefore no good or bad effect. It is
not necessary to dye or bleach the
leather in any circumstances.
Clean the carpet
Use foam detergent. Before washing,
read the instructions and follow the
procedures. More dirt can be re鄄
moved with a vacuum cleaner. Make
proper foams according to the in鄄
structions of assembling. Do not add
water into it. When the carpet is
clean, this foam cleaning agent can
completely remove the dirt.
Clean the safety belts
Clean the safety belts using the rec鄄
ommended neutral soap solution for
internal decoration parts or carpet.
Follow the instructions, and do not
Rust prevention and appearance caring
97
bleach or dye the safety belts, as
this will affect their strength.
Clean the window glass
You may use glass cleaning agent to
clan the glass. Take care when
cleaning the inside of windows, to
avoid damaging the anti-fog line on
the rear windshield.
Other questions?
For any other question on vehicle
maintenance, please consult with the
JAC dealer.
Vehicle maintenance requirements
Scope of maintenance
Repair requirements
Confirm if it runs at normal speed
and implement maintenance and re鄄
pairs. Accessories with strict repair
requirements should be serviced by
qualified technical personnel. It is al鄄
so your duty to refer to the warranty
requirements in maintenance and re鄄
pair. The repair certificate and rele鄄
vant detailed information will also be
provided to you when the JAC vehi鄄
cle is supplied to you.
Maintenance requirements
The maintenance requirements con鄄
sist of the following three parts:
音 periodical maintenance
音 general checks
音 maintenance by vehicle owner
Periodical maintenance
Requirements on checks, adjustment
and replacement are given on the
following page. The maintenance
procedure should be implemented
and maintenance schedule be refer鄄
enced, to determine that you have
implemented the procedure correct鄄
ly. We recommend that these main鄄
tenance procedures be performed
by qualified technical personnel
trained by original factory of JAC
dealer, as they have professional re鄄
pair equipment. It is strongly recom鄄
mended to use genuine JAC acces鄄
sories for repair or replacement. En鄄
gine oil, engine cooling liquid and
manual transmission tank oil and
braking liquid of equivalent quality
are not within the scope of JAC Au鄄
tomobiles Company or its dealers,
but you should use high quality en鄄
gine oil. The repair certificate has
provided details of relevant warrant鄄
ed items.
General checks
A general check procedure should
be implemented before driving a
JAC vehicle or a vehicle with full fuel
tank.
Maintenance by vehicle owner
If you are fond of mechanical de鄄
vices, get all necessary tools and
perform possible maintenance.
Main points of maintenance
音 Each time after obtaining mainte鄄
nance service from JAC Company,
keep the maintenance record. Such
100
documents can help you determine
that you have got correct mainte鄄
nance. Such documents can play an
important role if JAC dealer fails to
provide service.
音 If you desire to perform mainte鄄
nance and repair by yourself, you
can get assistance from the service
manual of JAC Company. A copy
can be provided by the accessories
department of JAC dealer.
Requirements
of
periodical
maintenance
Relevant checks should be made in
case of a fault or when a fault is i鄄
dentified. The maintenance receipts
for exhaust control system should be
kept, to certify that the warranted
condition of the exhaust system con鄄
forms to the actual condition.
101
Periodical maintenance
Implement the following maintenance services and determine the normal control ability and status of the vehicle. To en鄄
sure the warranty service for you, keep all service receipts. The recorded number of kilometers and time will determine
the number of maintenances with the data first appeared.
Maintenance to be performed at the earli鄄
er of the designated driving mileage or
time internal
Km*1000
5
10
20
30
40
50
60
70
80
90 100
No. of months
4
8
16
24
32
40
48
56
64
72
80
绎Replace engine oil and oil filter
*1
Every 10,000 km or every 12 months
Replace air filter element
Every 30,000 km
Inspection valve gap
Every 40,000 km
Replace fuel filter
*2
荫
荫
荫
Replace spark plug
*3
荫
荫
Replace timing belt and inspection water pump
Every 40,000 km
Inspect and adjust the driving belt
Every 10,000 km
Inspect engine idling speed
Every 20,000 km
绎Replace engine cooling liquid
Every 40,000 km or every 24 months
绎: Before driving, make a definite inspection of the engine oil, braking liquid, gearbox oil and cooling liquid.
*1: For driving under severe conditions, the replacement mileage/ time for engine oil and oil filter is every 5000 km or 6
months.
*2: If the fuel used contains foreign substance, the fuel filter need to be replaced more frequently. If the filter is found
blocked by foreign substance, replace it.
*3: If the fuel used contains foreign substance, the spark plug need to be replaced more frequently. If the engine idling
speed is found not steady, clean or replace the spark plug.
Vehicle maintenance requirements
102
If necessary, it will be proceeded in the steps of cleaning, washing, adjusting, lubricating, repair or replacement after in鄄
spection.
Maintenance to be performed at the ear鄄
lier of the designated driving mileage or
time internal
Km*1000
5
10
20
30
40
50
60
70
80
90 100
No. of months
4
8
16
24
32
40
48
56
64
72
80
绎Replace gearbox oil
荫
荫
荫
绎Replace transfer case oil and main reducer oil (4WD)
荫
荫
荫
Inspect the front and rear brakes
Every 10, 000km or every 12 months
绎Replace hydraulic braking liquid
Every 30, 000km
Inspect and adjust parking brake
荫
荫
荫
荫
Tire shifting (at least once a month for tire pressure and
wearing)
Tires are shifted every 10,000 km
Visual inspection of the following
Steering gear housing, tie rod spherical head and dust
sleeve/ swinging arm head
Every 10,000 km or every 12 months
Suspension assembly/ support/ driving shaft dust hood
Engine cooling system hose
Braking hose and piping
荫
荫
荫
荫
荫
荫
荫
荫
荫
绎Inspection of all liquid level ands oil levels
Exhaust system
Fuel piping and its connections
荫
荫
绎: Before driving, make a definite inspection of the engine oil, braking liquid, gearbox oil and cooling liquid.
103
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст