Chery QQ6 (Body Accessories and Dimensions). Service Instruction — part 7
97
3.10 The installation clearances of side outer plate and rear bumper at J-J are:
1.25±0.75mm; 0.25±0.25mm, respectively.
Uniformity: 0.5
Uniformity: 0.5
Side Outer Plate
Rear Bumper
-------------------------------------------------------------------------------------------------------------------------------------------------------------
98
3.11 Installation dimension of top cap and top cap trim at R-R: 0.75±0.75mm
Installation dimension of side outer plate and top cap trim: 4.75±0.75mm
Installation dimension of side outer plate and front door window frame:
2.5±0.5mm; 4.5±0.75mm, respectively
3.12 Clearance between the upper part of front left door and the upper part of front
right door at S-S: 4.5±0.75mm
Uniformity: 1.0
Uniformity: 1.0
Top Cap
Top Cap Trim
Side Outer Plate
Front Door Window Frame
Uniformity: 1.0
Uniformity: 0.5
Upper Part of Front Left Door
Upper Part of Rear Left Door
-------------------------------------------------------------------------------------------------------------------------------------------------------------
99
3.13 The fit clearances of rear door outer trim board and side outer plate at T1-T1 are:
4.75±0.25mm; 9.5±0.5mm, respectively.
3.14 The fit dimensions of front door outer quarter window and front door window
frame at T2-T2 are: 5±1mm; 5±1mm, respectively.
Uniformity: 1.0
Uniformity: 0.5
Rear Door Outer Trim
Board
Side Outer Plate
Uniformity: 0.5
Uniformity: 0.5
T2-T2
Scale: 1:1
-------------------------------------------------------------------------------------------------------------------------------------------------------------
100
3.15 The clearance between the fender and bumper at U-U: 0.5±0.5mm
3.16 The fit clearances of rear door outer panel and side skirt outer plate at V-V are:
6±0.5mm; 1.75±0.75mm, respectively.
Uniformity: 1.0
Uniformity: 1.0
Uniformity: 0.5
Uniformity: 0.5
Fender
Front Bumper
-------------------------------------------------------------------------------------------------------------------------------------------------------------
101
3.17 The fit dimensions of side outer plate and fuel filler opening door outer panel at
W-W are: 4±1mm;
4±0.5mm;
0.25±0.25mm, respectively
Uniformity: 0.5
Uniformity: 1.0
Uniformity: 1.0
Uniformity: 0.5
fuel filler opening door outer panel
side outer plate
side outer plate
-------------------------------------------------------------------------------------------------------------------------------------------------------------
102
3.18 The fit dimensions of front door window glass and front door window frame at
AF-AF are: 3.5±0.5mm;
6.5±0.5mm;
2.5±0.5mm, respectively;
The fit dimensions of front door window frame and A pillar outer panel are:
4.5±0.5mm
The fit dimensions of front windscreen and A pillar outer panel are: 4.5±0.5mm;
5±1mm
Uniformity: 1.0
Uniformity: 0.5
Uniformity: 1.0
Front Door Window Glass
Front Door Window Frame
A Pillar Inner Panel
A Pillar Outer Panel
A Pillar Reinforcement Plate
Front Windscreen
The uniformity at the right and left symmetrical positions doesn’t exceed 1 mm.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
103
3.19 The fit dimensions of side outer plate and fender at AG-AG are: 1.75±0.75mm;
0.25±0.25mm, respectively.
Uniformity: 1.0
Uniformity: 0.5
Side Inner Plate
Side Outer Plate
Fender
-------------------------------------------------------------------------------------------------------------------------------------------------------------
104
4. Top View
-------------------------------------------------------------------------------------------------------------------------------------------------------------
105
4.1 Clearances of grille and hood outer panel at K-K are: 0.25±0.25mm; 1.5±0.5mm,
respectively.
Clearances of hood outer panel and front bumper are: 6±1mm; 1.75±0.75mm,
respectively.
Uniformity: 1.0
Uniformity: 1.0
Uniformity: 0.5
Uniformity: 0.5
Front Bumper
Hood Inner Panel
Hood Outer Panel
Grille
-------------------------------------------------------------------------------------------------------------------------------------------------------------
106
4.2 The fit clearances of top cap and front windscreen at U-U are: 4±0.5mm;
4.5±0.5mm, respectively.
Uniformity: 1.0
Uniformity: 0.5
Front Windscreen Fixing Glue
Front Windscreen
Top Cap
-------------------------------------------------------------------------------------------------------------------------------------------------------------
107
4.3 Clearance of top cap and rea windscreen at M-M are: 1±0.5mm; 6.75±0.75mm
respectively.
4.4
Clearances of rear windscreen and back door outer panel at N-N are: 1±0.5 mm; 4±0.5 mm
respectively.
Uniformity: 1.0
Uniformity: 0.5
Back Door Inner Panel
Back Door Outer Panel
Rear Windscreen
Rear Windscreen Fixing Glue
Rear Windscreen
Uniformity: 0.5
Rear Windscreen Fixing Glue
Back Door Outer Panel
Back Door Inner Panel
Top Cap
Uniformity: 1.0
-------------------------------------------------------------------------------------------------------------------------------------------------------------
108
4.5 Clearance between the hood outer panel and low beam lamp at O-O: 4±1mm
Hood Outer Panel
Hood Inner Panel
Uniformity: 1.0
Low Beam Lamp
-------------------------------------------------------------------------------------------------------------------------------------------------------------
109
4.6 Clearances of Hood Outer Panel and fender at P-P are: 4±1mm; 0.75±0.75mm.
Uniformity: 1.0
Uniformity: 0.5
Fender
Hood Outer Panel
Hood Inner Panel
-------------------------------------------------------------------------------------------------------------------------------------------------------------
110
III. Dimension of Engine Compartment
No
Name
Hole Diameter
(mm)
A/B/C/D
Headlamp assembly hole
7
E/F
Bumper cross beam installation hole
7
G/H
Engine right suspension bracket
assembly hole
13
I/J/K/L
Fender installation hole
7
M/N
Shock absorber assembly hole
76
-------------------------------------------------------------------------------------------------------------------------------------------------------------
111
Windscreen Dimension
-------------------------------------------------------------------------------------------------------------------------------------------------------------
112
V. Dimension of Opening of Each Part
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст