Chery Tiggo 5 (T21). Service manual — part 491
46–
14
46
g. Disconnect the wire harness connector (arrow) and
clip (1) under the seat assembly (for driver seat
assembly).
h. Disconnect the wire harness connectors (arrow) and
clip (1) under the seat assembly (for front passenger
seat assembly).
i. Pull up the seat track unlock handle and move the seat assembly to the mid-position. At the same time,
operate the seat reclining adjuster handle and move the seatback to the upright position, and remove
the driver seat assembly.
Disassembly
HINT:
Use the same procedures for the front passenger seat assembly and driver seat assembly.
Procedures listed below are for the driver seat assembly.
1. Remove the driver seat track unlock handle.
a. Remove the fixing screw (arrow) from the seat track
unlock handle, and remove the driver seat track
unlock handle.
(Tightening torque: 4.8 ± 0.5 N·m)
RT21330080
1
RT21460100
1
CAUTION
Be sure to wear safety equipment to prevent accidents when disassembling seat assembly.
RT21460101
46–
15
46
2. Remove the driver seat front mounting foot cover assembly.
a. Remove 2 fixing screws (arrow) from the seat front
mounting foot cover assembly, and remove the driver
seat front mounting foot cover assembly.
(Tightening torque: 4.8 ± 0.5 N·m)
3. Remove the driver seat rear mounting foot cover assembly.
a. Remove 2 fixing screws (arrow) from the seat rear
mounting foot cover assembly, and remove the driver
seat rear mounting foot cover assembly.
(Tightening torque: 4.8 ± 0.5 N·m)
4. Remove the seat height adjuster handle (for driver side).
a. Using a screwdriver wrapped with protective tape, pry
up the seat height adjuster handle cover (1).
b. Remove 2 fixing screws (arrow) from the seat height
adjuster handle, and remove the seat height adjuster
handle.
(Tightening torque: 4.8 ± 0.5 N·m)
RT21460110
RT21460120
RT21460130
1
46–
16
46
5. Remove the power seat position adjust switch (for driver side) (if equipped).
a. Using a screwdriver wrapped with protective tape, pry
up the claw on the power seat position adjust switch,
and remove the power seat position adjust switch.
6. Remove the driver seat reclining adjuster handle.
a. Using a screwdriver wrapped with protective tape, pry
up the seat reclining adjuster handle cover (1).
b. Remove 2 fixing screws (arrow) from the seat
reclining adjuster handle, and remove the driver seat
reclining adjuster handle.
(Tightening torque: 4.8 ± 0.5 N·m)
7. Remove the power seat reclining adjust switch (for driver side) (if equipped).
a. Using a screwdriver wrapped with protective tape, pry
up the claw on the power seat reclining adjust switch,
and remove the power seat reclining adjust switch.
RT21460630
1
RT21460140
RT21460620
46–
17
46
8. Remove the seat outer shield assembly (for driver side).
a. Remove 3 fixing screws from the seat outer shield
assembly.
(Tightening torque: 4.8 ± 0.5 N·m)
b. Using a screwdriver wrapped with protective tape, pry
up the claws on the seat outer shield assembly, and
remove the seat outer shield assembly.
9. Remove the seat outer shield assembly (for front passenger side).
a. Remove 2 fixing screws from the seat outer shield
assembly.
(Tightening torque: 4.8 ± 0.5 N·m)
RT21460152
RT21460150
RT21460153
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст