Chery Tiggo 5 (T21). Service manual — part 251
22–
20
22
Rear Sub Frame Assembly
Removal
1. Remove the rear wheel (
2. Remove the center exhaust pipe assembly (
).
3. Remove the rear sub frame assembly.
a. Remove the coupling bolts and nuts (arrow) between
rear suspension upper left swing arm assembly and
rear sub frame assembly. Use the same procedure to
remove the right side.
(Tightening torque: 120 ± 10 N·m)
b. Remove the coupling bolt and nut (arrow) between
rear suspension lower left swing arm assembly and
rear sub frame assembly. Use the same procedure to
remove the right side.
(Tightening torque: 120 ± 10 N·m)
c. Remove 2 coupling bolts and 2 coupling nuts (arrow)
between rear sub frame assembly and body.
(Tightening torque: 120 ± 10 N·m)
d. Remove the rear sub frame assembly.
WARNING
Be sure to wear necessary safety equipment to prevent accidents.
Check if safety lock of lifter is locked when repairing chassis parts.
It is not permitted to weld or modify bearing parts of wheel suspension and guide parts of wheel.
When removing chassis parts, replace the self-locking nuts and rusted nuts for safety.
RT21220330
RT21220340
RT21220350
22–
21
22
Installation
Installation is in the reverse order of removal.
CAUTION
Always tighten the coupling bolts and nuts to the specified torque.
Check and adjust the rear wheel alignment after installation.
22–
22
1
23
SUSPENSION
Description 23-3
Specifications 23-6
Tools 23-9
Removal 23-13
Disassembly 23-15
Inspection 23-18
Assembly 23-18
Installation 23-18
Disposal 23-19
Removal 23-20
Installation 23-21
Front Control Arm Ball Pin Assembly 23-22
Removal 23-22
Inspection 23-23
Installation 23-23
Removal 23-24
Inspection 23-26
Installation 23-26
Front Stabilizer Link Assembly
Removal 23-27
Inspection 23-27
Installation 23-28
Removal 23-30
Inspection 23-32
Installation 23-32
Disposal 23-33
Removal 23-34
Inspection 23-36
Installation 23-36
Removal 23-37
Installation 23-37
Removal 23-38
Installation 23-39
Removal 23-40
Installation 23-42
Removal 23-43
Inspection 23-44
Installation 23-44
Removal 23-45
Inspection 23-45
Installation 23-46
Description 23-47
Specifications 23-47
Problem Symptoms Table
Inspection before Wheel Alignment
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст