Peugeot 2008 (2016 year). Instruction — part 28
.
Audio and Telematics
59
2008-additif_en_Chap12b_SMEGplus_ed01-2016
As a safety measure and because it
requires sustained attention by the
driver, using a smartphone when
driving is prohibited.
All operations must be done with the
vehicle stationary.
As a safety measure, applications
can only be viewed with the vehicle
stationary; display is interrupted once
the vehicle is moving.
The synchronisation of a
smartphone allows applications on a
smartphone that are adapted to the
CarPlay
®
technology to be displayed on
the vehicle's screen.
As the principles and standards are
constantly evolving, it is recommended
that you update the operating system of
your smartphone.
For the list of eligible smartphones,
connect to the brand's internet website
in your country.
On connecting the USB cable, the
"Telephone" function changes to
"CarPlay" in the menu carousel.
Press on "CarPlay" to display the
CarPlay
®
interface.
Press on "CarPlay" to display the
CarPlay
®
interface.
Connect a USB cable. The
smartphone charges when
connected by a USB cable.
Press the end of the lighting control stalk to
start voice recognition of your smartphone via
the system.
CarPlay
®
smartphone
connection
During the procedure, one or more
screen pages relating to certain
functions are displayed on connection.
From the system, press on
"Connected services" to display the
primary page.
Connect the USB cable. The
smartphone is charged while
connected by the USB cable.
Or
Voice recognition
When the telephone menu is displayed,
connection of the USB cable causes the
display to automatically change to CarPlay
mode.
When another menu is displayed, on
connection of a USB cable a message is
displayed in the upper bar, indicating that
CarPlay mode has been activated.
Press Open to display CarPlay mode.
Audio and Telematics
60
2008-additif_en_Chap12b_SMEGplus_ed01-2016
Level 1
Telephone
Level 2
Level 3
Contacts
Call log
.
Audio and Telematics
61
2008-additif_en_Chap12b_SMEGplus_ed01-2016
Level 1
Level 2
Level 3
Comments
Telephone
Call log
All calls
After making choices, start the call.
Incoming calls
Outgoing calls
Contacts
Magnifying glass
View
Create
Call
Telephone
Contacts
Addresses
After making choices, start the call.
View
Create
Modify
Delete
Delete all
By name
Confirm
Navigate to
Search for contact
Call
Audio and Telematics
62
2008-additif_en_Chap12b_SMEGplus_ed01-2016
Bluetooth (devices)
Telephone Options
Devices detected
Telephone connection
Level 1
Level 2
Level 3
.
Audio and Telematics
63
2008-additif_en_Chap12b_SMEGplus_ed01-2016
Level 1
Level 2
Level 3
Comments
Telephone
connection
Secondary page
Bluetooth
connection
Search
Start the search for another peripheral device to
connect.
Connect/Disconnect
Start or stop the Bluetooth
®
connection to the
selected peripheral device.
Update
Import the contacts from the selected telephone
to store them in the audio system.
Delete
Delete the selected telephone.
Confirm
Save the settings.
Telephone
connection
Secondary page
Search for
devices
Devices detected
Telephone
Start the search for peripheral devices.
Audio streaming
Internet
Telephone
connection
Secondary page
Telephone Options
Put on hold
Cut out the microphone temporarily so that the
contact cannot hear your conversation with a
passenger.
Update
Import the contacts from the selected telephone
to save then in the audio system.
Ringtones
Choose the telephone ringtone and volume.
Memory info.
Contact records used and free, percentage of
storage space used by internal contacts and
Bluetooth
®
contacts.
Confirm
Save the settings.
Audio and Telematics
64
2008-additif_en_Chap12b_SMEGplus_ed01-2016
Pairing a Bluetooth
®
telephone
For reasons of safety and because they
require prolonged attention on the part
of the driver, the operations for pairing
the Bluetooth
®
mobile telephone to the
hands-free system of the audio system
must be carried out with the vehicle
stationary.
Procedure (short) from the
telephone
In the Bluetooth
®
menu of your device, select
the system name in the list of devices detected.
Enter a code of at least 4 figures in the device
and confirm.
Enter this same code in the system,
select "OK" and confirm.
Procedure from the system
Activate the telephone's Bluetooth
®
function
and ensure that it is "visible to all" (telephone
configuration).
Press on Telephone to display the
primary page.
Press on the secondary page.
Select "Bluetooth connection".
Select "Search for devices".
The list of telephones detected is
displayed.
If the telephone is not detected, it is
recommended that you switch the Bluetooth
®
function on your telephone off and then on again.
Select the name of the
desired peripheral from the
list and "Confirm".
Enter a code of at least 4 figures for
the connection then "Confirm".
Enter this same code in the telephone then
accept the connection.
The system offers to connect the telephone:
-
in "Telephone" (hands-free kit, telephone
only),
-
in "Audio streaming" (streaming: wireless
playing of audio files from the telephone),
-
in "Internet" (internet browsing, only if your
telephone is compatible with the "DUN"
Dial-Up Networking Bluetooth
®
standard).
Select one or more profiles and confirm.
.
Audio and Telematics
65
2008-additif_en_Chap12b_SMEGplus_ed01-2016
The services available depend
on the network, the SIM card and
the compatibility of the Bluetooth
®
telephone used. Check the telephone
manual and with your network
provider for details of the services
available to you.
The ability of the system to connect
with only one profile depends on the
telephone. The three profiles may all
connect by default.
Visit www.peugeot.co.uk for more information
(compatibility, additional help, ...).
The recognised telephone
appears in the list.
Depending on your telephone, you may be
asked to accept automatic connection every
time the ignition is switched on.
On return to the vehicle, if the last telephone
connected is present again, it is reconnected
automatically and within around 30 seconds
after switching on the ignition the pairing is
done without any action on your part, (with
Bluetooth
®
activated).
To modify the automatic connection mode,
select the telephone in the list then select the
desired profile.
Depending on the type of telephone,
the system will ask you to accept or not
the transfer of your contacts.
If not, select "Update".
Connecting a Bluetooth
®
peripheral device
Automatic reconnection
On switching on the ignition, the telephone
connected when the ignition was last switched
off is automatically reconnected, if this
connection mode had been activated during the
pairing procedure.
The connection is confirmed by the display of a
message and the name of the telephone.
Manual connection
Press on Telephone to display the
primary page.
Press on the secondary page.
Select "Bluetooth" to display the list
of paired peripherals.
Select the peripheral to connect.
Press on "Search for devices".
The connection is confirmed by the display of a
message and the name of the telephone.
Audio and Telematics
66
2008-additif_en_Chap12b_SMEGplus_ed01-2016
Managing paired
telephones
This function allows the connection or
disconnection of a peripheral device as
well as the deletion of a pairing.
Using the telephone is not
recommended while driving.
Park the vehicle.
Make the call using the steering
mounted controls.
Press on Telephone to display the
primary page.
Press on the secondary page.
Select "Bluetooth" to display the list
of paired peripheral devices.
Select the peripheral in the list.
Select "Search for devices"
Or
"Connect / Disconnect" to start or
end the Bluetooth connection with
the selected device.
Or
"Delete" to delete the pairing.
Receiving a call
An incoming call is announced by a ring and a
superimposed display in the screen.
Make a short press on the steering
mounted TEL button to accept an
incoming call.
Make a long press
on the steering mounted TEL button
to reject the call.
Or
Select "End call".
Making a call
Calling a new number
Press on Telephone to display the
primary page.
Enter the phone number using the
digital keypad.
Press "Call" to start the call.
Calling a contact
Press on Telephone to display the
primary page.
Or make a long press
on the steering mounted TEL button.
.
Audio and Telematics
67
2008-additif_en_Chap12b_SMEGplus_ed01-2016
Select "Contacts".
Select the desired contact from the list offered.
Select "Call".
Calling a recently used number
Press on Telephone to display the
primary page.
Select "Call log".
Select the desired contact from the list offered.
It is always possible to make a call
directly from the telephone; park the
vehicle first as a safety measure.
Managing contacts / entries
Press on Telephone to display the
primary page.
Select "Contacts".
Select "View".
Select "Create" to add a new contact,
observing the "international format".
Or
"Modify" to edit the selected contact.
Or
"Delete" to delete the selected
contact.
Or
"Delete all" to delete all information
for the selected contact.
Select "By name" to view the list of
contacts.
Audio and Telematics
68
2008-additif_en_Chap12b_SMEGplus_ed01-2016
The following table groups together the answers to the most frequently asked questions concerning your audio system.
Frequently asked questions
Navigation
QUESTION
ANSWER
SOLUTION
The route calculation is not
successful.
The route settings may conflict with the current location (exclusion of
toll roads on a toll motorway).
Check the route settings in the "Navigation"
menu.
The POIs do not appear.
The POIs have not been selected.
Select the POIs in the list of POIs.
The Risk areas audible
warning does not work.
The audible warning is not active.
Activate audible warnings in the "Navigation"
menu.
The system does not
suggest a detour around an
incident on the route.
The guidance criteria do not take account of TMC messages.
Select the "Information" function in the list of route
settings.
I receive a Risk areas alert
which is not on my route.
Other than guidance, the system announces all Risk areas
positioned in a cone located in front of the vehicle. It may provide an
alert for Risk areas located on nearby or parallel roads.
Zoom in on the map to view the exact position of
the Risk areas. Select "On the route" to no longer
receive alerts other than navigation instructions or
to reduce the time for the announcement.
.
Audio and Telematics
69
2008-additif_en_Chap12b_SMEGplus_ed01-2016
QUESTION
ANSWER
SOLUTION
Certain traffic jams along
the route are not indicated
in real time.
On starting, it is several minutes before the system begins to receive
the traffic information.
Wait until the traffic information is being received
correctly (display of the traffic information icons
on the map).
The filters are too restrictive.
Modify the settings.
In certain countries, only major routes (e.g. motorways) are listed for
the traffic information.
This phenomenon is normal. The system is
dependent on the traffic information available.
The altitude is not
displayed.
On starting, the initialisation of the GPS may take up to 3 minutes to
receive more than 4 satellites correctly.
Wait until the system has started up completely so
that there is GPS coverage by at least 4 satellites.
Depending on the geographical environment (e.g. tunnel) or the
weather, the conditions of reception of the GPS signal may vary.
This phenomenon is normal. The system
is dependent on the GPS signal reception
conditions.
Audio and Telematics
70
2008-additif_en_Chap12b_SMEGplus_ed01-2016
Radio
QUESTION
ANSWER
SOLUTION
The quality of reception of
the radio station listened
to gradually deteriorates
or the stored stations do
not function (no sound,
87.5 Mhz is displayed, etc.).
The vehicle is too far from the transmitter used by the station
listened to or there is no transmitter in the geographical area
through which the vehicle is travelling.
Activate the "RDS" function by means of the
short-cut menu to enable the system to check
whether there is a more powerful transmitter in
the geographical area.
The environment (hills, buildings, tunnels, basement car parks, etc.)
block reception, including in RDS mode.
This phenomenon is normal and does not indicate
a fault with the audio system.
The aerial is absent or has been damaged (for example when going
through a car wash or into an underground car park).
Have the aerial checked by a PEUGEOT dealer.
I cannot find some radio
stations in the list of
stations received.
The station is not received or its name has changed in the list.
Press and hold the "List" button at the steering
mounted controls to update the list of stations
received or press on the system update function:
"Update list".
Some radio stations send other information in place of their name
(the title of the song, for example).
The system interprets this information as the name of the station.
The name of the radio
station changes.
.
Audio and Telematics
71
2008-additif_en_Chap12b_SMEGplus_ed01-2016
Media
QUESTION
ANSWER
SOLUTION
Playback of my USB
memory stick starts only
after a very long wait
(around 2 to 3 minutes).
Some files supplied with the memory stick may greatly slow down
access to reading the memory stick (multiplication by 10 of the
catalogue time).
Delete the files supplied with the memory stick
and limit the number of sub-folders in the file
structure on the memory stick.
When I connect my iPhone
as a telephone and to the
USB port at the same time,
I am unable to play the
music files.
When the iPhone connects automatically as a telephone, it forces
the streaming function. The streaming function takes the place of
the USB function which is then not useable, there is a period without
sound of the track being played with Apple
®
players.
Disconnect and reconnect to the USB port (the
USB function takes priority over streaming).
The CD is ejected
automatically or is not
played by the player.
The CD is inserted upside down, is unplayable, does not contain any
audio data or contains an audio format which the player cannot play.
Check that the CD is inserted in the player the
right way up.
Check the condition of the CD: the CD cannot be
played if it is too badly damaged.
Check the content in the case of a recorded CD:
refer to the advice in the "AUDIO" section.
The audio system's CD player does not play
DVDs.
Some recorded CDs will not be played by the
audio system because they are not of adequate
quality.
The CD has been recorded in a format that is not compatible with the player (udf, etc.).
The CD is protected by an anti-pirating protection system which is
not recognised by the audio system.
There is a long waiting period
following the insertion of a
CD or connection of a USB
memory stick.
When a new medium is inserted, the system reads a certain amount
of data (directory, title, artist, etc.). This may take from
a few seconds to a few minutes.
This phenomenon is normal.
Audio and Telematics
72
2008-additif_en_Chap12b_SMEGplus_ed01-2016
QUESTION
ANSWER
SOLUTION
The CD player sound is
poor.
The CD used is scratched or of poor quality.
Insert good quality CDs and store them in suitable
conditions.
The audio system settings (bass, treble, ambiences) are unsuitable.
Set the treble or bass level to 0, without selecting
an ambience.
Some characters in the
media information are not
displayed correctly while
playing.
The audio system does not display some types of characters.
Use standard characters to name tracks and
folders.
Playing of streaming files
does not start.
The peripheral device connected does not support automatic play.
Start the playback from the device.
The names of tracks and
the track length are not
displayed on the screen
when streaming audio.
The Bluetooth profile does not allow the transfer of this information.
.
Audio and Telematics
73
2008-additif_en_Chap12b_SMEGplus_ed01-2016
QUESTION
ANSWER
SOLUTION
When changing the
settings for treble and
bass, the ambience is
deselected.
The selection of an ambience imposes the settings for treble and
bass.
Modifying one without the other is not possible.
Modify the settings for treble and bass or then
ambience setting to obtain the desired sound
environment.
When changing the
ambience, the settings for
treble and bass return to
zero.
When changing the
balance settings, the
distribution setting is
deselected.
The selection of a distribution setting imposes the balance settings.
Modifying one without the other is not possible.
Modify the balance or distribution settings to
obtain the desired sound environment.
When changing the
distribution setting, the
balance settings are
deselected.
When the "All passengers"
mode is selected, the
distribution is not as I
would like.
The choice of an "All passengers" distribution setting can be
programmed.
Modify the distribution setting using the slider on
the touch screen.
Settings
Audio and Telematics
74
2008-additif_en_Chap12b_SMEGplus_ed01-2016
QUESTION
ANSWER
SOLUTION
There is a difference in
sound quality between the
different audio sources.
For optimum sound quality, the audio settings for Loudness,
Ambience, Treble, Bass, Volume can be adapted to the different
sound sources, which may result in audible differences when
changing source.
Check that the audio settings (Loudness,
Ambience, Treble, Bass, Volume) are adapted to
the sources listened to. Adjust Balance, Treble
and Bass to the middle position, select the
"None" musical ambience and set the loudness
correction to the "Active" position in CD mode or
to the "Inactive" position in radio mode.
With the engine off, the
system switches off after a
few minutes of use.
When the engine is switched off, the system's operating time
depends on the state of charge of the battery.
The switch-off is normal: the system switches to economy mode and
switches off to prevent discharging of the vehicle's battery.
Start the vehicle's engine to increase the battery
charge.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст