Peugeot 807 Dag (2007.5). Instruction — part 5
ER
G
O
N
O
MI
C
S
an
d
C
O
MF
O
R
T
65
3
Rear head restraints
The rear head restraints can be removed
and have two positions:
high, position for use,
low, storage position.
To raise or lower a head restraint, pull it
forwards sliding it at the same time.
To remove it, place it in the high position,
push the lug and pull it forwards and upwards.
To refit it, engage the head restraint rods
in the holes taking care to remain in the
centreline of the seat back.
Never drive with the head restraints
removed, they must be in place and
correctly adjusted.
Refitting the centre seat
Check that there is no obstacle
obstructing the slides or preventing
correct locking of the seat anchorages.
1 - Place the front anchorages at the front
stop in the slides. Support the strap
firmly for easier positioning of the seat.
2 - Tilt the folded seat towards the rear.
The rear anchorages lock.
3 - Raise the seat back and slide the seat.
Turning a rear seat round
The rear seats can be placed in a "face to
face" position.
Carry out the operations described for
removal then turn the seat round and
resume with the procedure for
refitting the
seat.
This turning operation must be carried
out when stationary.
Driving with a passenger seated facing the
rear is prohibited.
When the vehicle is being driven, placing
a row 2 seat in the closed position while a
passenger is sitting in row 3 is prohibited.
Seats
ER
G
O
N
O
MI
C
S
an
d
C
O
MF
O
R
T
65
3
Rear head restraints
The rear head restraints can be removed
and have two positions:
high, position for use,
low, storage position.
To raise or lower a head restraint, pull it
forwards sliding it at the same time.
To remove it, place it in the high position,
push the lug and pull it forwards and upwards.
To refit it, engage the head restraint rods
in the holes taking care to remain in the
centreline of the seat back.
Never drive with the head restraints
removed, they must be in place and
correctly adjusted.
Refitting the centre seat
Check that there is no obstacle
obstructing the slides or preventing
correct locking of the seat anchorages.
1 - Place the front anchorages at the front
stop in the slides. Support the strap
firmly for easier positioning of the seat.
2 - Tilt the folded seat towards the rear.
The rear anchorages lock.
3 - Raise the seat back and slide the seat.
Turning a rear seat round
The rear seats can be placed in a "face to
face" position.
Carry out the operations described for
removal then turn the seat round and
resume with the procedure for
refitting the
seat.
This turning operation must be carried
out when stationary.
Driving with a passenger seated facing the
rear is prohibited.
When the vehicle is being driven, placing
a row 2 seat in the closed position while a
passenger is sitting in row 3 is prohibited.
Seats
Seats
66
REAR BENCH SEAT
Forwards/backwards adjustment
From the seat cushion, lift bar
A and slide
the seat towards the front or the rear.
From the boot, you can pull on strap
B
and slide the seat forwards to make it
easier to load the vehicle.
The rear bench seat must only be
fitted in row 3.
Seat back folded position
1 - Place the head restraints in the low
position.
2 - Pull the strap C upwards, from the
tailgate.
3 - Tilt the seat back on the seat cushion.
Vertical position of the bench seat
1 - Place the head restraints in the low
position.
2 - Pull the strap C upwards, from the
tailgate.
3 - Fold the seat back onto the seat
cushion.
4 - Pull the lever D to unlock the rear
anchorages.
5 - Place the seat in the vertical "folded"
position.
When driving, attach the retaining
straps to the handles.
ER
G
O
N
O
MI
C
S
an
d
C
O
MF
O
R
T
67
3
Removing the bench seat
1 - Fold the seat to the vertical position.
2 - Grasp the two bars E underneath the
seat.
3 - The front anchorages
unlock.
Refitting the bench seat
For removal and refitting, pass the rear
seat, in the "folded" position, through
the sliding side doors.
Check that there is nothing blocking
the runners which could prevent correct
locking of the bench seat anchorages.
1 - Position the front anchorages at the
front stop of the runners.
2 - Tilt the folded seat rearwards.
3 - The rear anchorages then lock.
4 - Unlock the seat back and lift it using the
strap
C.
Good practice
When the vehicle is being driven, it is
prohibited for a passenger to sit:
- in the 3rd row if the seat back in front
(2nd row) is in the table position.
- in the 3rd row if the seat/bench in front
(2nd row) is in the vertical folded position.
- in the centre seat if the right-hand side
seat is in the vertical folded position.
Seats
Seats
68
The centre seat may be installed in the
central position in row 2 and in the left
side position in row 3.
MODULARITY AND POSSIBLE SEAT CONFIGURATIONS
Examples of various arrangements
combining pleasure and practicality:
The various operations modifying the
existing configuration must be carried
out with the engine switched off (See section
on "Seats").
It is prohibited to be in a rearwards facing
position when the vehicle is being driven.
The rotating of the seats depends on the
vehicle equipment and the country.
5 seats with picnic position when parked
5 seat arrangements
ER
G
O
N
O
MI
C
S
an
d
C
O
MF
O
R
T
69
3
7 seats with access to row 3
8 seats with bench seat
Seats
Seats
70
"Cargo"/transportation of long objects configuration
6 seats "Pullman"
Practical information
ER
G
O
N
O
MI
C
S
an
d
C
O
MF
O
R
T
71
3
FRONT SEAT LAYOUT
Storage drawers
There is a storage drawer under each front
seat.
- To open it, lift and pull.
- To take it out, open it to its full extent, lift
the two tabs on either side of the drawer,
then remove it completely.
Each front seat also has a storage
pocket on the seat back.
12 V socket
You have a 12 V accessory socket at the
foot of the driver"s seat, which is accessible
to passengers of row 2.
Front and rear armrests
To place the armrest in its rest position:
- Lift the armrest until it is aligned with the
seat back.
To place the armrest in the position in
which it is used:
- Push it towards the rear,
- Fold it down completely,
- Raise it slowly to the required position,
- If you lift it past the required position,
restart the above operations.
Elastic retaining straps
There is an elastic retaining strap on each
front seat, on the centre side.
- In the side position (elastic strap on its
own seat), this can be used as a magazine
holder.
- In the transverse position (elastic straps
A
hooked between the two seats), they can
hold a bag.
"Aircraft" type table
You have an "aircraft" type table with a rim,
equipped with a cup holder, fitted to the rear
of each front seat.
Do not forget to fold this before pivoting the
seat.
PRACTICAL INFORMATION
Under the front seat on the passenger
side, if the vehicle has an amplifier, the
storage drawer will be locked.
72
Practical information
Practical information
ER
G
O
N
O
MI
C
S
an
d
C
O
MF
O
R
T
73
3
The light comes on when the cover is
opened.
It contains three sockets for the connection
of video equipment and access to the fascia
fuse box.
It includes special compartments for
storing maps, a packet of cigarettes, an A4
document etc.
6. Lighter or 12 V socket for accessories
This permits the connection of a mobile
telephone charger, a baby's bottle warmer,
etc.
7. Cooled compartment
It can hold up to three cans.
Slide the closer, located on the right, to
open (upwards) or close (downwards) the
air inlet.
8. Can holder and ashtray
This retractable and lit support contains up
to two can holders, a removable ashtray and
a location for the lighter when it is used as a
12 V socket.
1. Driver's upper glove box
To open, press the button.
To close, press the cover.
It includes special compartments for storing
a pen, a mobile telephone, coins or tokens
and credit cards.
2. Audio equipment concealing flap
Lower the flap fully to lock it in place.
Press the flap to raise it.
3. Central storage compartment
4. Passenger's upper glove box
To open, press the button.
To close, press the cover.
It includes special compartments for storing
a pair of spectacles, keys, five CDs and four
audio cassettes or nine audio CDs.
5. Passenger's lower glove box
This is fitted with a lock.
To open the glove box, lift the handle.
FRONT INTERIOR LAYOUT
9. Storage compartment or additional
telematics control
The storage compartment must not be used
as an ashtray.
If fitted on your vehicle, the additional
telematics control is located on the centre
console.
10. Storage compartment
11. Door tray with space for a bottle of
water
12. Mat fitting/removal
When removing the front mat, push the
seats as far back as possible and remove
the fixings.
When refitting, position the mat correctly on
the pins and clip the fixings.
Check that the mat is secured correctly.
To prevent the mat from becoming caught
under the pedals:
- only use mats suited to the fixings already
present in the vehicle.
It is imperative that these fixings are used.
- never fit one mat on top of another.
74
Practical information
Practical information
ER
G
O
N
O
MI
C
S
an
d
C
O
MF
O
R
T
75
3
REAR INTERIOR LAYOUT
6. Can holder
7. Storage compartment
8. Bottle holder or portable bin with
ashtray
9. Luggage retaining net "hammock"
position fastenings
Fold the net in two.
Secure the two centre hooks in the stowing
rings on the floor.
Secure the net's remaining four hooks on
the tailgate pillars.
10. 12 V socket for accessories
This permits the connection of a mobile
telephone charger, a baby's bottle warmer, ...
11. Luggage retaining net "octopus"
position
Secure the net's four hooks in their stowing
rings on the floor.
1. Access handle
2. Grab handle and coat hook
3. Door tray with storage for a can and
a bottle of water or for the portable
bin with ashtray
4. High load retaining net fastenings
Open the covers of the upper fastenings in
row 3.
Install the ends of the metal bar in these
fastenings.
Secure the two tray strap hooks in the
stowing rings on the floor.
Pull the two straps taut.
Secure the two hooks on the elastic parts of
the tray in these rings.
The rings are located directly below the
corresponding upper fastenings.
5. Storage compartment
12. Load space cover (5 seat version)
To install it:
- position one end of the roller in row 2,
- compress the opposite end of the roller and
position it,
- release it to allow it to engage,
- unroll the cover as far as the pillars,
- secure the two hooks on the pillars,
To remove it:
- pull the cover towards you to detach it from
its fastenings,
- return the cover into its roller,
- compress it and remove it from its support
in row 2.
13. Rear shelf with umbrella holder
(6-7-8 seat version)
To remove the shelf:
- pull it rearward
- lift it slightly, then remove it
To install it:
- tilt it forwards slightly,
- push to engage it in its fastenings.
76
Front courtesy light
Automatic switching on/off
The front courtesy light comes on when the
key is removed from the ignition, when the
vehicle is unlocked, when one of the front
doors is opened or for location of the vehicle
using the remote control.
It switches off gradually after the ignition is
switched on and when the vehicle is locked.
Permanently on, ignition on.
Front: comes on when one of the
front or rear doors is opened.
Permanently off.
Individual reading light
Rear courtesy light rows 2 and 3
These are switched on and off by means of
a manual switch.
COURTESY LIGHTS
Rows 2 and 3: comes on when
one of the rear doors is opened.
Rear courtesy light
Practical information
Practical information
ER
G
O
N
O
MI
C
S
an
d
C
O
MF
O
R
T
77
3
AREAS FOR TOLL
CARDS/CAR PARK TICKETS
The athermic windscreen has two
non-reflective zones located either side of
the base of the interior mirror.
They are intended for affixing toll cards
and/or car park tickets.
SUN VISOR WITH ILLUMINATED
COURTESY MIRROR
With the ignition on, the mirror is illuminated
automatically when the concealing flap is
raised.
SIDE BLINDS
Side blinds are available in rows 2 and/or 3.
Pull the side blind by the tab(s).
Position the blind's attachment(s) on the
corresponding hook(s).
Ensure that the tabs are hooked
correctly to prevent any damage to the
blind when the corresponding sliding side
door is opened.
Mirrors and windows
78
Manual interior mirror
The interior mirror has two positions:
day (normal),
night (anti-dazzle).
To change from one to the other, push or
pull the lever on the lower edge of the mirror.
Automatic day/night interior mirror
This automatically and gradually changes
between the day and night positions. To
prevent dazzling, the glass of the mirror
darkens automatically depending on the
intensity of the light from behind. It clears
as the light (headlamps of following vehicles,
sunlight) decreases, ensuring maximum
visibility.
Operation
Switch on the ignition and press switch
1:
Indicator light
2 lit (switch pressed):
automatic operation.
MIRRORS
Electric exterior mirrors
Move switch
A to the right or to the left to
select the corresponding mirror.
Move knob
B in all four directions to
adjust.
Return switch
A to the centre
position.
When parked, the mirrors can be folded
back manually, or electrically by pulling
switch
A rearwards.
Electric unfolding of the mirrors is possible
with the key on unlocking the vehicle.
Indicator light
2 off: automatic system off.
The mirror remains at its most clear.
MIRRORS AND WINDOWS
Special feature
To ensure maximum visibility during
manoeuvres, the mirror clears automatically
when reverse gear is engaged.
ER
G
O
N
O
MI
C
S
an
d
C
O
MF
O
R
T
79
3
ELECTRIC WINDOWS
1 - Driver's electric window switch.
2 - Passenger electric window switch.
3 - Rear right electric window switch.
4 - Rear left electric window switch.
5 - Rear electric windows disarming
switch (child safety).
red strip visible: the rear switches are
activated.
red strip covered: the rear switches are
disarmed.
You have two options:
Manual operation:
press or pull switch 1, without going
beyond the point of resistance. The
window stops when the switch is
released.
Automatic operation:
press or pull switch
1, beyond the point of
resistance: the window opens or closes
completely when the switch is released.
Pressing the switch again stops the
movement of the window.
The electrical functions of the electric
windows are disarmed one minute after
switching off the ignition.
Disarming the rear controls
For the safety of your children, press switch
5 to disarm all of the electrical controls in
the rear:
electric windows,
sliding side doors,
sunroofs.
Mirrors and windows
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст