Peugeot 307 CC (2007.5). Instruction — part 10
126
MENU
ESC
LIST
MENU
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
1
2
3
5
7
4
6
8
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
03 GPS
SELECTING A DESTINATION
Press the MENU button.
Turn the dial and select the
NAVIGATION GUIDANCE function.
Press the dial to conirm the selection.
Turn the dial and select the
DESTINATION CHOICE function.
Press the dial to conirm the selection.
Press the dial to conirm the selection.
Turn the dial and select the ENTER
AN ADDRESS function.
When the country has been selected,
turn the dial and select the TOWN
function.
TOWN
ENTER AN ADDRESS
DESTINATION CHOICE
Tip: for a detailed global view of the menus available, refer to the "Display low charts"
section of this RT4 chapter.
127
9
11
12
14
10
13
ESC
MENU
LIST
2
abc
5
jkl
8
tuv
3
def
6
mno
9
wxyz
1
4
ghi
r
7
pq s
0
#
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
Press the dial to conirm the selection.
Turn the dial and select the letters of
the town one by one conirming each
time by pressing the dial.
Select OK and press the dial to
conirm.
To speed up the process, the POST CODE can be
entered instead of the name of the town.
Use the alphanumeric keypad to enter the letters and
digits and "*" to correct.
Press the dial to conirm the selection.
Select OK on the ENTER AN
ADDRESS page.
Repeat steps 8 to 12 for the ROAD and N° functions.
OK
OK
Select the STORE function to record the address entered in a
directory record and press the dial to conirm the selection.
The points of interest (POI) indicate all of the service locations in the
vicinity (hotels, various businesses, airports...).
STORE
PARIS
POI
128
ESC
LIST
MENU
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
MENU
1
2
3
4
5
6
7
8
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
03
Turn the dial and select, for example,
the DISTANCE/TIME function.
GUIDANCE OPTIONS
GPS
The route chosen by the RT4 GPS audio/telephone depends directly on the guidance options.
Changing these options may completely change the route.
Press the MENU button.
Turn the dial and select the
NAVIGATION GUIDANCE function.
Press the dial to conirm the selection.
Turn the dial and select the
GUIDANCE OPTIONS function.
Turn the dial and select the DEFINE
CALCULATION CRITERIA function.
Press the dial to conirm the selection.
Press the dial to conirm the selection.
GUIDANCE OPTIONS
DEFINE CALCULATION CRITERIA
DISTANCE/TIME
129
ESC
MENU
LIST
ESC
MENU
LIST
MENU
9
10
11
12
1
2
3
4
5
ESC
LIST
MENU
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
Turn the dial and select the
GUIDANCE OPTIONS function.
Turn the dial and select the TRAFFIC
INFO function if it is not ticked.
Press the dial to conirm the selection.
Select OK and press the dial to
conirm.
TRAFFIC INFO
Press the dial to conirm the selection.
Tick this box for optimum operation of the trafic information,
diversions will be suggested.
OK
GUIDANCE SPEECH SYNTHESIS
Press the MENU button.
Turn the dial and select the
NAVIGATION GUIDANCE function.
Press the dial to conirm the selection.
GUIDANCE OPTIONS
Press the dial to conirm the selection.
130
ESC
LIST
MENU
ESC
MENU
LIST
ESC
MENU
LIST
MENU
6
8
1
2
3
4
ESC
MENU
LIST
ESC
MENU
LIST
S
O
S
SOURCE
MODE
BAND
T
PT
A
Y
DARK
ESC
MENU
LIST
7
ESC
MENU
LIST
03
Select OK and press the dial to
conirm.
Select the DEACTIVATE function and
press the dial to conirm.
Press the MENU button.
Turn the dial and select the MAP
function.
Press the dial to conirm the selection.
Turn the dial and select the MAP
DETAILS function.
Permits selection of the services
which can be seen on the map
(hotels, restaurants...).
ACTIONS ON THE MAP
MAP DETAILS
During the announcements, the volume of each
speech synthesis function (guidance, trafic
information...) can be adjusted directly.
GUIDANCE SPEECH
SYNTHESIS
Select the ADJUST SPEECH
SYNTHESIS function and press the
dial to conirm.
GPS
ADJUST SPEECH SYNTHESIS
DEACTIVATE
OK
131
ESC
MENU
LIST
MENU
ESC
MENU
LIST
ESC
LIST
MENU
ESC
MENU
LIST
ESC
MENU
LIST
1
2
3
4
5
6
7
ESC
MENU
LIST
ESC
MENU
LIST
03
For improved visibility, beyond the scale of 10 km, the map automatically switches to North
Orientation.
Turn the dial and select the MAP
function.
Press the MENU button.
Press the dial to conirm the selection.
Turn the dial and select the 3D VIEW
tab.
Select OK and press the dial to
conirm.
Turn the dial and select the MAP
ORIENTATION function.
Press the dial to conirm the selection.
3D VIEW
GPS
MAP ORIENTATION
3D VIEW
OK
132
ESC
MENU
LIST
MENU
ESC
MENU
LIST
ESC
LIST
MENU
1
2
3
4
5
6
7
ESC
MENU
LIST
03
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
Press the MENU button.
Press the dial to conirm the selection.
Turn the dial and select the MAP
function.
Turn the dial and select the MAP IN
WINDOW or FULL SCREEN MAP
tab.
Select OK and press the dial to
conirm.
Press the dial to conirm the selection.
Turn the dial and select the DISPLAY
MAP function.
DISPLAYING THE MAP IN A WINDOW OR
IN FULL SCREEN MODE
GPS
FULL SCREEN MAP
DISPLAY MAP
MAP IN WINDOW
OK
133
ESC
LIST
MENU
MENU
1
ESC
MENU
LIST
2
3
4
5
ESC
MENU
LIST
9
ESC
MENU
LIST
8
ESC
MENU
LIST
7
ESC
MENU
LIST
6
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
03
ADDING A STAGE
During guidance, press the MENU
button.
Turn the dial and select the
NAVIGATION GUIDANCE function.
Press the dial to conirm the selection.
Turn the dial and select the
JOURNEY LEGS AND ROUTE
function.
JOURNEY LEGS AND ROUTE
Select OK and press the dial to
conirm the order of the stages.
When the new address has been
entered, select OK and press the dial
to conirm.
Enter for example a new address.
Select the ADD A STAGE function
(9 stages maximum) and press the
dial to conirm.
ENTER AN ADRESS
Press the dial to conirm the selection.
ADD A STAGE
The stage must be completed or deleted before the guidance can
continue to the next destination.
Otherwise, the RT4 GPS audio/telephone will always guide you
back to the previous stage.
GPS
134
ESC
LIST
MENU
MENU
1
ESC
MENU
LIST
2
3
ESC
MENU
LIST
4
5
ESC
MENU
LIST
6
7
ESC
MENU
LIST
8
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
04
Select OK and press the dial to
conirm.
Select the GEOGRAPHIC FILTER
function and press the dial to conirm.
Turn the dial and select the FILTER
TRAFFIC INFORMATION function.
ACTIVATING THE FILTER ON THE ROUTE
We recommend a ilter on the route and a ilter around the vehicle of:
- 5 km or 10 km for a region with heavy trafic,
- 20 km for a region with a normal level of trafic,
- 100 km for long journeys (motorway).
Press the MENU button.
Turn the dial and select the TRAFFIC
INFORMATION function.
Press the dial to conirm the selection.
FILTER TRAFFIC INFORMATION
GEOGRAPHIC FILTER
OK
Press the dial to conirm the
selection.
Turn the dial and select the ON THE
ROUTE tab.
TRAFFIC INFORMATION
135
ESC
LIST
MENU
MENU
1
ESC
MENU
LIST
2
3
4
6
5
ESC
MENU
LIST
ESC
MENU
LIST
7
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
04
Select OK and press the dial to
conirm.
Press the MENU button.
NEW MESSAGE DISPLAY
READ MESSAGES
OK
CONFIGURING THE TMC MESSAGE
ANNOUNCEMENTS
We recommend that you do not tick the NEW MESSAGE DISPLAY tab for regions with heavy trafic.
Turn the dial and select the TRAFFIC
INFORMATION function.
Press the dial to conirm the selection.
Press the dial to conirm the selection.
Turn the dial and select the
CONFIGURE MESSAGE
ANNOUNCEMENT function.
Select the READ MESSAGES tab.
The Trafic Information Messages will
be read by the voice synthesiser.
Select the NEW MESSAGE DISPLAY
tab.
The trafic information messages
are extended to the ilters selected
(geographic...) and can also be
displayed when guidance is not
active.
TRAFFIC INFORMATION
CONFIGURE MESSAGE ANNOUNCEMENT
136
1
2
3
4
S
O
S
SOURCE
MODE
BAND
T
PT
A
Y
DARK
SOURCE
S
O
S
SOURCE
MODE
BAND
T
PT
A
Y
DARK
BAND
SOURCE
BAND
ESC
MENU
LIST
LIST
ESC
LIST
MENU
MENU
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
1
2
3
4
LIST
ESC
MENU
LIST
ESC
MENU
LIST
05 AUDIO/VIDEO
RADIO
SELECTING A STATION
Press the SOURCE button several
times in succession and select the
RADIO.
Press the BAND button to select a
waveband: FM1, FM2, FMast, AM.
Briely press one of the buttons to
carry out an automatic search of the
radio stations.
Press one of the buttons to carry out a
manual search of the radio stations.
Press the LIST button to display
the list of stations received locally
(60 maximum).
To update this list, press for more than
two seconds.
The external environment (hills, buildings, tunnels, basement car parks, ...) may block reception,
including in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does
not indicate any failure of the audio equipment.
RDS
Select ACTIVATE FREQUENCY
FOLLOWING (RDS) then press OK.
RDS appears on the display.
Select the RADIO PREFERENCES
function then press OK.
Select AUDIO FUNCTIONS then
press OK.
Press the MENU button.
The RDS, if displayed, enables you to continue listening to the
same station by means of frequency following. However, in certain
conditions, this RDS station is not followed throughout the country
as radio stations do not cover 100 % of the territory. This explains
the loss of reception of the station during a journey.
ACTIVATE FREQUENCY FOLLOWING (RDS)
RADIO PREFERENCES
137
S
O
S
SOURCE
MODE
BAND
T
PT
A
Y
DARK
SOURCE
ESC
MENU
LIST
LIST
SOURCE
LIST
S
O
S
SOURCE
MODE
BAND
ESC
2
abc
5
jkl
8
tuv
3
def
6
mno
9
wxyz
1
4
ghi
7
pqrs
0
#
MENU
LIST
TA PTY
DARK
1
2
05 AUDIO/VIDEO
MP3 CD
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer
3, is an audio compression standard which permits the recording of
several tens of music iles on a single disc.
In order to be able to play a recorded CDR or CDRW, when recording
it is preferable to select standards ISO 9660 level 1.2 or Joliet.
If the disc is recorded in another format, it may not be played
correctly.
It is recommended that the same recording standard is always used
for an individual disc, with as low a speed as possible (4x maximum)
for optimum sound quality.
In the particular case of a multi-session CD, the Joliet standard is
recommended.
The audio equipment will only play audio iles with the extension
".mp3" with a sampling rate of 22.05 KHz or 44.1 KHz. No other type
of ile (.wma, .mp4, m3u...) can be played.
It is advisable to restrict ile names to 20 characters without using
special characters (e.g.: " " ? ; ù) to avoid any playing or displaying
problems.
CD
Insert circular compact discs only. Some anti-pirating
systems, on original discs or CDs copied using
a personal recorder, may generate malfunctions
regardless of the quality of the original player.
Insert an audio CD or an MP3 compilation in the player,
play begins automatically.
If the player already contains a disc,
press the SOURCE button several
times in succession and select CD to
listen to it.
Press one of the buttons to select a
track on the CD.
Press the LIST button to display
the list of tracks on the CD or of the
directories of the MP3 compilation.
The playing and displaying of an MP3 compilation may depend on
the recording programme and/or the parameter settings used. We
recommend use of the ISO 9660 recording standard.
INFORMATION AND ADVICE
PLAYING A CD OR AN MP3 COMPILATION
138
2
3
S
O
S
SOURCE
MODE
BAND
ESC
2
abc
5
jkl
8
tuv
3
def
6
mno
9
wxyz
1
4
ghi
7
pqrs
0
#
MENU
LIST
TA PTY
DARK
ESC
LIST
MENU
ESC
MENU
LIST
6
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
4
ESC
MENU
LIST
5
1
Select the letters one by one and select
OK to conirm.
Select CREATE ALBUM and press
the dial to conirm.
Select COMPLETE CD to copy
the entire CD and press the dial to
conirm.
Select COPY CD TO JUKEBOX and
press the dial to conirm.
CREATE ALBUM
COMPLETE CD
COPY CD TO JUKEBOX
OK
The AUTO CREATION tab automatically copies the CD by default
into an album of the type "album n°...".
The audio or MP3 CD is copied onto the hard disc. Copying may
take approximately 20 minutes depending on the duration of the CD.
During this copying phase, it is not possible to listen to the albums
previously recorded on the hard disc or the CDs.
If it is not an MP3 CD, the Jukebox automatically compresses
the CD in MP3 format. The compression may take approximately
20 minutes depending on the duration of the CD. During this
compression phase, it is possible to listen to the CD or to albums
previously recorded on the hard disc.
A long press on the SOURCE button starts the copying of the CD.
When copying an MP3 CD, the Jukebox only retains the last album
level. It is not possible to copy iles from the Jukebox to a CD.
The STOP THE CD COPY action does not delete the iles which
have already been transferred onto the jukebox hard disc.
Select AUDIO FUNCTIONS and press
the dial to conirm.
Insert a CD or an MP3 compilation
and press the MENU button.
JUKEBOX FUNCTION
COPYING A CD ONTO THE HARD DISC
139
ESC
MENU
LIST
ESC
MENU
LIST
6
7
5
ESC
LIST
MENU
MENU
ESC
MENU
LIST
2
3
4
1
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
ESC
MENU
LIST
Select the RENAME tab and press the
dial to conirm.
Select the JUKEBOX MANAGEMENT
function and press the dial to conirm.
Select the JUKEBOX function and
press the dial to conirm.
RENAME
JUKEBOX
JUKEBOX MANAGEMENT
RENAMING AN ALBUM
Press the MENU button.
Select AUDIO FUNCTIONS and
press the dial to conirm.
Select the album to be renamed and
press the dial to conirm.
Turn the dial and select the letters of
the album title one by one conirming
each time by pressing the dial.
Use the alphanumeric keypad to enter the letters of the album title
one by one.
JUKEBOX FUNCTION
140
8
SOURCE
2
ESC
MENU
LIST
LIST
ESC
MENU
LIST
S
O
S
SOURCE
MODE
BAND
T
PT
A
Y
DARK
SOURCE
ESC
MENU
LIST
LIST
ESC
MENU
LIST
1
3
Select OK and press the dial to
conirm.
DELETE
OK
Press the SOURCE button several
times in succession and select the
JUKEBOX function.
Press the LIST button.
Turn the dial to select the iles.
Press the ESC button to return to the irst ile level.
JUKEBOX
To rename the tracks of an album, follow the same procedure,
selecting the tracks to be renamed.
Use the ESC button to exit from the list of tracks.
Select the DELETE function to delete an album or a
track from the Jukebox.
JUKEBOX FUNCTION
LISTENING TO THE JUKEBOX
141
1
SOURCE
2
S
O
S
SOURCE
MODE
BAND
T
PT
A
Y
DARK
SOURCE
2
abc
5
jkl
8
tuv
3
def
6
mno
9
wxyz
1
4
ghi
7
pqrs
0
#
2
abc
5
jkl
8
tuv
3
def
6
mno
9
wxyz
1
4
ghi
r
7
pq s
0
#
S
O
S
SOURCE
MODE
BAND
T
PT
A
Y
DARK
SOURCE
SOURCE
ESC
MENU
LIST
1
3
2
Press the MENU button then select the CONFIGURATION function,
then SOUNDS, then ACTIVATE AUXILIARY SOURCE to activate
the auxiliary input of the RT4 GPS audio/telephone.
Connect the portable equipment (MP3
player…) to the audio sockets (white and
red, RCA type) located in the glove box
using a JACK/RCA audio cable.
Press the SOURCE button several
times in succession and select AUX.
Insert one or more CDs in the
changer.
Press the SOURCE button several
times in succession and select CD
CHANGER.
Press one of the buttons on the
alphanumeric keypad to select the
corresponding CD.
Press one of the buttons to select a
track on the CD.
The displaying and management of the commands takes place via
the portable equipment.
It is not possible to copy the iles onto the hard disc from the auxiliary
input.
It is not possible to copy the iles onto the hard disc from the CD
changer.
USING THE AUXILIARY INPUT (AUX)
JACK/RCA AUDIO CABLE NOT SUPPLIED
CD CHANGER
PLAYING A CD (NOT MP3 COMPATIBLE)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст