Peugeot 4007 (2012 year). Instruction — part 12
11
AUDIO EQUIPMENT and TELEMATICS
ERROR MESSAGES
If an error message appears on the screen, refer to the table below to fi nd out what it means and the solution to be applied
in order to rectify it.
TEXT
DESCRIPTION
SOLUTION
NO DISC
No disc present.
Disc not compatible.
Insert a disc.
ERROR 01
Disc inserted incorrectly.
Disc with condensation.
Insert the disc with the printed face upwards.
Clean the dampness off the disc.
ERROR 02
Disc dirty, scratched or distorted.
Excessive vehicle vibration.
Clean or replace the disc.
Try again when the vibration has stopped.
ERROR 03
Error on insertion or ejection.
Playing head misaligned.
Eject the disc and insert it again. If it is not ejected,
have the audio equipment checked.
ERROR HOT
Triggering of the internal protection against high
temperatures.
Wait approximately 30 minutes to allow the audio
system to cool.
ERROR
Communication error between the audio system
and the external system.
External system supply error.
Consult a PEUGEOT dealer.
11
AUDIO EQUIPMENT and TELEMATICS
AUDIO: selection of Audio-video
(FM, CD, music server,
...) or
Navigation (map) display.
VOL: adjustment of audio-video
volume.
OPEN: tilts the
screen and permits
access to the CD/
DVD. A second press
closes the screen.
SCALE: changing the scale of the
map.
ENT: confi rms the choice of the
item selected on the screen.
For certain operations, confi rma-
tion is given by contact with the
touch screen.
Scrolling the map displayed or
selection of an item.
For safety reasons, the driver
must only carry out opera-
tions which require prolonged
attention with the vehicle sta-
tionary.
AUDIO-TELEMATIC SYSTEM
AUDIO-TELEMATIC SYSTEM
Changing the audio-video source
(FM, CD, music server, ...).
Mute on/off.
Next or previous selection for:
-
a radio station,
-
an audio track (CD),
-
a chapter (DVD).
Move a fi nger over the screen to operate
the system.
Use the buttons offered on the screen.
POWER: audio system on/off
(only).
Setting the audio volume.
11
AUDIO EQUIPMENT and TELEMATICS
DESCRIPTION OF THE CONTROLS - MENUS
US
MODE: Audio-video menu for:
- radio,
-
audio, MP3 or WMA CD,
- music
server,
- DVD.
MENU:
Navigation-guidance menu
for selecting:
- a
destination,
-
a point of interest (POI),
-
an advanced search by POI,
-
one of the 20 previous destinations,
-
an address stored in the address
book,
-
the return home,
-
certain navigation settings,
-
a route demonstration.
NAVI: display of the current location
on the map .
SET: Settings menu for:
-
switching off the screen,
-
selecting the sound setting,
-
selecting the picture quality,
-
selecting the language, the time
zone or the units,
- selecting the size of the DVD
picture,
- selecting the guidance voice,
the screen colour schemes or
display of the audio-video icon,
-
setting certain equipment available
in your vehicle.
INFO:
Information menu for the
consultation or adjustment of certain
settings for your vehicle.
11
AUDIO EQUIPMENT and TELEMATICS
NAVIGATION - GUIDANCE
NAVIGATION - GUIDANCE
What is the navigation system and
the GPS?
The satellite navigation system guides
the driver to the destination that he has
set in accordance with a chosen route.
Initially, it searches for the destination
required by the user, then it calculates
the route and fi nally it provides the visual
and audible guidance instructions.
What precautions should be
observed in order to make best use
of the system?
Do not place anything on or near the
GPS aerial.
Do not use any digital communication
equipment (personal computers, etc.)
near the GPS aerial.
Do not affi x any refl ective fi lms or fi lms
containing carbon to the windows.
The GPS (Global Positioning
System) consists of several
satellites distributed around
the earth. They continuously
transmit digital signals which
travel at the speed of light, on 2 different
frequencies.
At any given time, the system receives
its position in relation to the satellites
detected and the time of transmission
of the signal.
This enables the telematic unit to cal-
culate its position and therefore that of
the vehicle.
A repositioning process using the map
database stored on the hard disk allows
the vehicle to be positioned on the road
network, so improving the accuracy of
the vehicle location function.
What is a point of interest (POI)?
Up to 40 different icons may
be displayed (refer to the
section "Points of interest
icon").
They are classifi ed in 5 groups and
identifi ed by one colour for each group:
- Shops, fi
nance and businesses
(Green),
-
Vehicles and travel (Dark blue),
- Restaurants
(Orange),
-
Public places and emergency services
(Brown),
-
Entertainment and attractions (Blue).
GPS
The system's measurements may be
inaccurate if the vehicle is:
-
in a tunnel or underground car park,
-
underneath a two-level motorway,
- in an area with several very high
buildings,
-
surrounded by closely planted trees.
Depending on the vehicle's situation and
the reception of the GPS information, the
displayed information may disappear from
the screen temporarily.
A point of interest (POI) is
represented by an icon on
the map, it represents an
airport, a station, a town
hall, ...
11
AUDIO EQUIPMENT and TELEMATICS
A. Manoeuvre icon: indicates whether
the driver should turn left or right at
the next junction indicated by the
guidance and the distance to this
junction.
B. Guidance route: indicates the route
to the destination.
C. Vehicle marker: indicates the position
of the vehicle while driving.
D. TMC icon: displays traffi c infor-
mation such as traffi c jams, road
works, etc.
When the icon is touched, detailed
TMC information can be viewed.
E. Orientation mark: indicates the ori-
entation of the map displayed.
F. Map scale: indicates the scale of
the map displayed.
G. Name of the street: indicates the
name of the current street.
H.
Direction frame: displays the
number of the next road or the
name of the next street which the
driver should turn into.
I. Destination/intermediate destina-
tion icon: indicates the direction
of the destination or intermediate
destination.
Two-map display.
Single map display.
Information displayed on
the map during navigation
J. Destination/intermediate destination
information: indicates the distance
and the time remaining until the des-
tination or intermediate destination is
reached.
K. Press for access to the Route
Menu in order to:
K1 - change the route in favour of an-
other making a detour through a
specifi ed region,
K2 - change the position of the des-
tination, add an intermediate
destination and change the route
calculation conditions,
-
K3
display a route by various methods,
- delete a route created,
K4
- search for points of interest (POI)
K5
around the current location.
K1
K2
K3
K4
K5
K
H
E
F
B
C
A
D
G
I
J
11
AUDIO EQUIPMENT and TELEMATICS
B -
Select a location using the name of a
point of interest (POI).
Select:
B1 - the country,
B2 - the city,
B3 - the name of a stored POI,
B4 -
a POI category (airport, bowling alley,
bus station, car park, service station,
hotel, cinema, ...),
B5 - a detailed POI list.
C - Select a location using an advanced
search based on a POI:
C1 - around the current location,
C2 - on the current route,
C3 - in the vicinity of the destination,
C4 - on a chosen street,
C5 - along a motorway or in the vicinity of the
exit,
C6 - by scrolling the map,
C7 - taking the point of departure of the current
route,
C8 - specifying the latitude/longitude coordinates.
A -
Select a location using the address or
street name of the destination. Select:
A1 - the country,
A2 - the city,
A3 - the street,
A4 - the house number,
A5 - the name of a junction,
A6 -
to select the search using either a number
or a junction.
You have a maximum of 100 points of interest (POI) within a radius of
approximately 60 miles (100 km).
Searching for a destination
using an address or points of
interest (POI)
C3
C6
A
B
C
A4
A3
A2
A1
A6
A5
B1
B2
B3
B4
B5
C1
C2
C4
C5
C7
C8
11
AUDIO EQUIPMENT and TELEMATICS
Searching using previous destinations, a stored address or a return home
E - Select a location using an address
stored in the address book. Sort
by:
E1 - con,
E2 - Name,
E3 - Date.
D - Select a location using one of the
20 previous destinations.
F - Select a return home directly.
Press YES to store your home address
(the first time).
E2
E1
E3
D
E
F
11
AUDIO EQUIPMENT and TELEMATICS
Navigation settings and
information (1/2)
G - Select the settings of functions
linked with the navigation to:
G1 - set the screen display parameters
such as:
- display 1 or 2 maps,
- display or do not display the POIs
on the map, display selected
icons,
- change the colours of the map,
- display or do not display the name
of the current street.
- display or do not display the address
of the current street.
G2 - set route conditions, such as,
- avoiding traffi c problems,
- avoiding selected areas,
- avoiding roads at a certain time.
G3 - set the route guidance mode and
the displaying of the results of the
route search.
G4 - save, change or delete a location
in the address book.
G5 - display and select the traffi c infor-
mation such as traffi c jams or road
works by selecting dynamic guidance.
G1
G2
G3
G4
G5
G
11
AUDIO EQUIPMENT and TELEMATICS
H - Select basic information relating
to the navigation as well as a pre-
set route demonstration to:
H1
-
choose to divert your route to
avoid certain areas,
H2
-
select a location using an ad-
vanced search based on a POI
along a motorway or in the vicinity
of the motorway exit,
H3 - start/stop the demonstration,
H4 - recall a stored map screen.
Navigation settings and
information (2/2)
H1
H2
H3
H4
H
11
AUDIO EQUIPMENT and TELEMATICS
Selecting points of interest (POI)
icons displayed on the map
You can select up to 40 types of point
of interest icon which are displayed on
your map screen.
Press the MENU button then [Navigation/
Settings].
Press [Screen] then [Select] on the POI
line.
Press [4] which is displayed.
Press each POI required.
At each contact with a POI, the display
of [α] changes (α = the POI will be dis-
played on the screen).
General
Town centre
Locality
Shops, fi nance and businesses
(Green)
Major companies
Shopping centre
Vehicles and travel
(Dark blue)
PEUGEOT
Airport
Bus stop
Vehicle hire
Suburban station/station
Ferry terminal
Hotel
Park and ride
Car park (press +)
Service station
Rest area
Toll booth
Tourist information
Railway station
Restaurant (Orange)
Night life/night club
Restaurant
Public places and emergency
services (Brown)
Town Hall
Community centre
Convention/exhibition centre
Hospital
University/college
Entertainment and attractions
(Blue)
Theme park
Bowling alley
Casino
Cinema
Golf course
Historical monument
Skating rink
Marina
Museum
Flying club
Leisure area
Ski station
Sports centre
Theatre/opera
Tourist attraction
Vineyard/wine and spirit store
11
AUDIO EQUIPMENT and TELEMATICS
Press
Explanations
Result
Press the MENU button.
Press [Address/Junction].
Press [Country] and enter the name of the country using the touch keypad.
When a character of the name of the country is entered, if 5 countries or
fewer are recognised, you can select a country from a list which is dis-
played or press [List].
You can select one of the 5 most recently selected countries by
pressing [Last 5] on the "Country" line.
Press [City] then [Keyword] and enter the name of the city using the touch
keypad.
When a character of the name of the city is entered, if 5 cities or fewer are
recognised, you can select a city from a list which is displayed or press
[List].
You can select a city using the post code.
Press [Post Code] and enter the number.
You can select one of the 5 most recently selected cities by pressing
[Last 5] on the "City" line.
Entering an address and starting guidance (1/2)
11
AUDIO EQUIPMENT and TELEMATICS
Entering an address and starting guidance (2/2)
Press
Explanations
Result
Press [Street] and enter the name of a street using the touch keypad.
When a character of the name of the street is entered, if 5 streets or fewer
are recognised, you can select a street from a list which is displayed or
press [List].
Press [House #] and enter the number of the house using the touch keypad.
You can enter the name of a junction instead of the number
of the street. Press [Junction] and select the name from a
list which is displayed.
This is the result once all of the information has been entered:
If you agree with the information press [Set], otherwise press one of the
buttons to correct.
Press [Start] to start the navigation.
/
11
AUDIO EQUIPMENT and TELEMATICS
Press
Explanations
Result
Press [Route].
Press [Display new route].
The system offers a detour route (dynamic guidance).
Press [Back] and enter to return to the previous screen.
The system asks you to confi rm or not the new route.
Press [Yes] to confi rm your choice. The system displays the name of the
new route.
Press [No] to not register the route.
Traffic information
During navigation, the system gives you
traffi c information received in real time.
The system can then suggest a detour
route, if dynamic guidance has been
activated by pressing MENU, [Naviga-
tion settings] then [TMC].
11
AUDIO EQUIPMENT and TELEMATICS
AUDIO-VIDEO
AUDIO-VIDEO
What is RDS?
RDS station following
Traffi c information function
Your radio automatically checks
and selects the best frequency
for the radio station to which it is
tuned (if the station broadcasts on se-
veral transmitters or frequencies).
The frequency of a radio station covers ap-
proximately 30 miles (50 km). The change
from one frequency to another explains
the loss of reception during a journey.
If the station to which you are listening
does not have several frequencies in
the region in which you are currently
located, you can deactivate the auto-
matic frequency following.
Radio, RDS, AF, REG, TP, PTY
Radio Data System (RDS) function
on the FM waveband permits:
- tuning to the same station while
travelling through different regions
(if the transmitters of this station
cover the area through which you
are travelling),
-
temporary tuning to traffi c information
announcements,
- display of the name of the station,
etc...
Most FM stations use RDS.
These stations transmit non-audible
data in addition to their programmes.
The data transmitted in this way allows
you access to various functions, mainly
displaying of the name of the station,
temporary tuning to traffi c information
announcements or automatic station
following.
RDS allows you to continue listening to
the same station by means of the fre-
quency following. However, in certain
conditions, this RDS frequency follo-
wing cannot be provided throughout
the country. Radio stations do not cover
the whole country, which explains the
loss of reception of the station during
a journey.
The Traffic Program (TP) func-
tion permits automatic and
temporary switching to an FM
station broadcasting traffi c information.
The radio station or the source that you
are listening to at this point is paused.
Once the traffi c information has ended,
the system switches back to the radio
station or the source that you were lis-
tening to initially.
Regional following mode
Some stations are organised in
a network.
In different regions, they broad-
cast different or shared programmes de-
pending on the time of day.
You can follow:
-
a regional station only,
-
the entire network, with the possibility
that you will be listening to a different
programme.
Programme types
Some stations offer the option of
listening to a themed type of pro-
gramme as a priority, selected from
the list available below:
NEWS, AFFAIRS, INFOS, SPORT,
EDUCATE, DRAMA, CULTURE, SCIENCE,
VARIED, POP M, ROCK M, EASY M,
LIGHT M, CLASSICS, OTHER M,
WEATHER, FINANCE, CHILDREN,
SOCIAL, RELIGION, PHONE IN, TRAVEL,
LEISURE, JAZZ, COUNTRY, NATION M,
OLDIES, FOLK M, DOCUMENT.
11
AUDIO EQUIPMENT and TELEMATICS
Information displayed in Radio mode
A. A pre-set number is displayed when a
pre-set channel has been selected.
B. The name of the station is displayed
during the reception of RDS data. If
the name has not been transmitted,
the frequency is displayed.
C. Stereo is displayed when a stereo
transmission is received.
D. AF is displayed when the AF control
function is activated.
E. PTY (programme type) is displayed
if the RDS data received is dis-
played.
TRAFINF is displayed, during an in-
terruption, for traffi c information.
ALARM is displayed, during an in-
terruption, for urgent information.
F. Display of 6 pre-set stored stations.
G. To receive the stored station.
Press and hold to store a station.
H. To change the frequency step by
step.
Press and hold for scrolling of the
frequency.
I. To search for currently broadcast-
ing stations which can be received
in the current location, until a station
is found.
J. To display the programme types
pre-setting screen, e.g.: sport, rock,
classical, news, ... Press PTY again
to exit.
K. Press this button to display the sec-
ondary menu.
L. REG is displayed during the reception
of regional frequencies data.
M. RDS is displayed during the reception
of RDS data.
N. TP is displayed when the traffi c infor-
mation is in standby mode.
A
B
C
D
E
G
H
I
J
K
L
M
N
F
11
AUDIO EQUIPMENT and TELEMATICS
Radio, selecting an FM station and storing
Press the MODE button.
Press
Explanations
Result
You can select [ Seek] or [Seek ] to start a continuous
search until the stations which can be received in the current
location are detected.
Press FM. By default the screen shows the FM1 stations.
Press [ Tune] to decrease the frequency or [Tune
] to increase the
frequency. The frequency is changed in steps of 0.1 MHz.
Continue to press to tune to a station automatically.
Once the frequency has been selected, a long press on the station (e.g. 3)
will store it.
The name of the station (e.g. PS name 1) is displayed if it is available.
You can start automatic storing on FM3 for 6 stations, which
can be received in the current location, by pressing [^] then
[Auto-Store].
You can also start a search by type of programme by pressing
[PTY].
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст