Peugeot 4007 (2012 year). Instruction — part 5

2

COMFORT

EERING WHEEL MANUAL

STEERING WHEEL MANUA

HEIGHT ADJUSTMENT

EIGHT ADJUSTMENT

) Pull the locking lever downwards

(position

B ) while supporting the

steering wheel.

) Adjust the steering wheel to the re-

quired height.

) Lock the steering wheel adjustment

by pushing the lever upwards (posi-

tion A ).

The sun visors fold forwards, and to the

side when they are unhooked.
They are fi tted with a courtesy mirror

and a ticket holder.

As a safety precaution, these op-

erations must only be carried out

while the vehicle is stationary.

AREAS FOR TOLL CARDS/CAR
PARK TICKETS

The athermic windscreen has a non-

refl ective zone located above the base

of the rear view mirror.
It is intended for affi xing toll cards and/

or car park tickets.

MAT

When removing the mat on the driver's

side, move back the seat as far as pos-

sible and remove the fi xings.
When refi tting, position the mat cor-

rectly on the pins and clip the fi xings.

Check that the mat is secured fi rmly.

To prevent any risk of jamming

under the pedals:
- only use mats suited to the

fi xings already present in the

vehicle; it is imperative that

these fi xings are used.

- never

fi t one mat on top of

another.

2

COMFORT

FRONT INTERIOR FITTINGS

FRONT INTERIOR FITTINGS

1. Spectacles storage.

2. Cooled upper glove box.

3. Lockable lower glove box.

4. 12 V socket (120 W max).

5. Armrest with storage compartments

12 V socket (120 W max).

6. Cup holder.

7. Removable ashtray.

8. Bottle holder.

9. Enclosed storage compartment.

10. Cup holder.

2

COMFORT

Cooled upper glove box

Press button A on the lid to open it.
To close it, push the lid up.
It is fi tted with a ventilation nozzle which

can be closed by means of a dial, dis-

tributing conditioned air at the same

temperature as the vents in the passen-

ger compartment.
In cold weather, it is advisable to close

this vent to conserve the ambient air in-

side the passenger compartment.

Spectacles storage

Press the cover to open it.
To close it, push the cover until it locks.

Lower glove box

This is fi tted with a lock.
To unlock it, turn the key to the left.
To open it, pull the handle A .
To close it, push the lid up.
To lock it, turn the key to the right.
It is fi tted with a pen holder and a card

holder.
It is illuminated on opening when the

vehicle lighting is on.

2

COMFORT

Upper storage compartment
Pull the right-hand lever to open the

storage compartment lid, which serves

as an armrest.
To close, fold down the lid until it locks.

Lower storage compartment

12 V socket (120 W max)

Armrest with storage compartments

12 V socket (120 W max)

This is operational when the ignition

switch is in the "LOCK", "ON" or "ACC"

position.
Check that the electrical equipment op-

erates on 12 volts and that its electrical

power is 120 W maximum.

The prolonged use of electrical

equipment without running the en-

gine may discharge the battery.

Pull the left-hand lever to open the lid.
To close, fold down the lid until it locks.

2

COMFORT

Removable ashtray

Pull the cover to open the ashtray.
To empty, remove the ashtray by pulling

it upwards.

12 V socket (120 W max)

This operates when the ignition switch is

in the "LOCK", "ACC" or "ON" position.
Open the cover to gain access to the

socket.

Check that the electrical equip-

ment operates on 12 V and that

its maximum electrical power is

120 W.
When you use the two sockets

at the same time, ensure that

the two items of equipment to-

gether operate on 12 V and that

their combined electrical power

is 120 W maximum.
The prolonged use of electrical

equipment without running the en-

gine may discharge the battery.

2

COMFORT

Cup holder

There is a cup holder fi tted in the dash-

board on the driver's side.
Press on the centre of the cover to ex-

tract the plate.
Pull it fully to use it.
Push it fully to store it.

Two further cup holders are available in

front of the front armrest.

Enclosed storage compartment

Pull the storage compartment lid to

open it.

2

COMFORT

AR INTERIOR FITTINGS

REAR INTERIOR FITTINGS

Rear armrest

Pull the armrest forwards to lower it.

Cup holder

Open the cover A located at the end of the

armrest holding the side with your hand.

Bottle holder

There is a bottle holder in each rear door.

Grab handle

Pull the handle downwards to lower it.

Coat hook

The rear left grab handle is fi tted with a

coat hook.

2

COMFORT

BOOT

BOOT FITTINGS

1. 12 V socket (120 W max).

2. Open storage compartment.

3. Right-hand side enclosed storage

compartment.

4. Storage compartment in the fl oor * .

5. Stowing rings.

6. Left-hand side storage compartment

or audio equipment.

7. Load space cover.

* 5-seat version only.

2

COMFORT

Stowing rings

There are four stowing rings in the boot

for securing luggage:
- two rings are located on the boot

fl oor,

- two rings are located on the rear

side pillars.

* On 5-seat version only.

Raise the boot fl oor to gain access to

this compartment.

Right-hand side enclosed storage

compartment
This storage compartment contains the

tools for changing a wheel.

Storage compartment in the fl oor *

12 V socket (120 W max)

This operates when the ignition switch

is in the "ON" or "ACC" position.
Lift the cover to gain access to the

socket.

Check that the electrical equip-

ment operates on 12 V and that

its maximum electrical power is

120 W.
The prolonged use of electrical

equipment without running the

engine may discharge the bat-

tery.

2

COMFORT

Load space cover

Unroll the load space cover and install it

in the housing A .
To store the load space cover, release it

from the housing, it reels in to its initial

position.

Second installation position.
The load space cover can be secured

in two different positions B , so that the

row 2 seat backs can be tilted.
1. Reel in the load space cover.
2. Move one of the slides C towards

the inside of the vehicle and insert

the tab D in the installation hole to

be used.

Move the opposite slide in the same

way.

3. After changing the position, check

that the load space cover is secured

correctly.

Removing the load space cover.
1. Reel in the load space cover.
2. Move one of the slides C towards the

inside of the vehicle and raise it.

Release the opposite slide in the

same way.

To put the load space cover in place,

carry out the operations in reverse order.

Take care not to place heavy

objects on the load space cover

when it is unfolded.

The load space cover can be

stored along the lower tailgate, un-

less audio equipment is present.

3

ACCESS

Unfolding the key
) First press button

A to unfold the

key.

Unlocking the vehicle

) Press the open padlock to

unlock the vehicle.

Unlocking using the remote control

REMOTE CO

ONTROL KEY

System which permits central unlock-

ing or locking of the vehicle using the

lock or from a distance. It also folds and

unfolds the mirrors, closes the electric

windows and starts the vehicle, as well

as providing protection against theft.

Locking the vehicle

Unlocking using the key
) Turn the key to the right in the driver's

door lock to unlock the vehicle.

) Press the closed padlock to

lock the vehicle.

If one of the doors or the tailgate

is still open, the central locking

will not take place.

Unlocking is confi rmed by the interior

lighting which comes on for approxi-

mately 15 seconds and the direction

indicators which fl ash twice .
If you press the open padlock twice in

succession within 30 seconds after

unlocking the vehicle, the door mirrors

unfold.

Normal locking using the key
) Turn the key to the left in the driver's

door lock to lock the vehicle.

Locking is confi rmed by the direction in-

dicators which come on once .
If you press the closed padlock twice

in succession within 30 seconds af-

ter locking the vehicle, the door mirrors

fold.
An extended press on the closed pad-

lock within 30 seconds after locking the

vehicle closes the windows automati-

cally.

Normal locking using the remote

control

3

ACCESS

The vehicle will relock automati-

cally after thirty seconds unless

a door or the tailgate is opened.

This function prevents inadver-

tent unlocking.
The duration which precedes

the automatic relocking of the

vehicle can be confi gured via

the colour screen "Equipment"

menu.

Folding the key
) First press button A to fold the key.

Electronic engine immobiliser
The key contains an electronic chip

which has a special code. When the ig-

nition is switched on, this code must be

recognised to permit starting.
This electronic engine immobiliser locks

the engine management system a few

moments after the ignition is switched

off and prevents starting of the engine

by anyone who does not have the key.

Anti-theft protection

In the event of a malfunction and if your ve-

hicle does not start, contact a PEUGEOT

dealer as soon as possible.

3

ACCESS

Starting the vehicle

) Insert the key in the ignition switch.
) Operate the starter by turning the

key to position 4 (START) .

) When the engine turns over, release

the key. The ignition switch is placed

in position 3 (ON) automatically.

Switching the vehicle off

) Park the vehicle.
) While pressing the key, turn it to-

wards you to position 1 (LOCK) .

) Remove the key from the ignition

switch.

Changing the battery

Battery reference: CR1616/3 volts.

) Unclip the casing using a coin at the

notch.

) Slide the fl at battery out of its housing.
) Slide the new battery into its housing

observing the original direction.

) Clip the casing.

Key in ignition

A buzzer sounds on opening the

driver's door, if the key has been

left in the ignition.

3

ACCESS

Keys

Make a careful note of the number of each key. This number is coded on the label attached to the key.
If the keys are lost, a PEUGEOT dealer can supply you with new keys.

Do not throw the remote control batteries away, they contain metals which are harmful to the environment.
Take them to an approved collection point.

Remote control

The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a

possibility that it may unlock the vehicle, without you being aware of it.
Do not repeatedly press the buttons of your remote control out of range and out of sight of your vehicle. You run the

risk of stopping it from working.
The remote control does not operate when the key is in the ignition, even when the ignition is switched off.

Locking the vehicle

Driving with the doors locked may make access to the passenger compartment by the emergency services more

diffi cult in an emergency.
As a safety precaution (with children on board), remove the key from the ignition when you leave the vehicle, even for a short time.

Anti-theft protection

Do not make any modifi cations to the electronic engine immobiliser system, this could cause malfunctions.

When purchasing a second-hand vehicle

Have the key codes memorised by a PEUGEOT dealer, to ensure that the keys in your possession are the only ones

which can start the vehicle.

3

ACCESS

The electric window switches

can be confi gured via the colour

screen "Equipment" menu.
The electric window switches

remain operational for approxi-

mately 30 seconds after the

ignition is switched off and the

switch on the driver's door re-

mains operational for a further

30 seconds when the door is

opened.
The windows can no longer be

opened or closed after the driver's

door is closed.
The rear windows do not lower

fully.

WINDOWS

1. Driver's electric window switch.
2. Passenger's electric window

switch.

3. Rear right electric window

switch.

4. Rear left electric window switch.
5. Deactivating the passenger and

rear electric window switches.

In the event of unwanted open-

ing of the window on closing (for

example in the presence of frost),

reinitialise the electric windows

(refer to the corresponding para-

graph).

Safety anti-pinch
In automatic mode, when the window

rises and meets an obstacle, it stops

and lowers again.

Operation

With the ignition on, you have two op-

tions:

-

manual mode

) Press the switch gently to open or

pull it gently to close. The window

stops as soon as the switch is re-

leased.

-

automatic mode

) Press the switch fully to open or

pull it fully to close. The window

opens or closes completely when

the switch is released.

) Pressing the switch again stops

the movement of the window.

System which opens or closes a win-

dow manually or automatically. It is

fi tted with a system which provides

protection if an obstacle is detected on

one-touch models and a deactivation

system to prevent misuse of the rear

controls.

3

ACCESS

Deactivating the passenger and rear

electric window switches

Reinitialising the electric windows

Following reconnection of the battery or

after the safety anti-pinch has been trig-

gered three times in succession, you

must reinitialise the safety anti-pinch

function:
) with the door closed, lower the win-

dow completely then raise it again, it

will rise in steps of a few centimetres

each time the switch is pressed, re-

peat the operation until the window

is fully closed,

) continue to press the switch for at

least one second after reaching the

window closed position.

Always remove the key from the

ignition when leaving the vehicle,

even for a short time.
In the event of contact during

operation of the windows, you

must reverse the movement of

the window. To do this, press the

switch concerned.
When the driver operates the

passenger electric window

switches, they must ensure that

no one is preventing correct

closing of the windows.
The driver must ensure that

passengers use the electric win-

dows correctly.
Be aware of children when oper-

ating the windows.

) For the safety of your children, press

switch 5 to prevent operation of the

passenger and rear electric windows

irrespective of their position.

When the button is pressed down, the

switches are deactivated.
When the button is raised, the switches

are activated.

When the button is pressed down,

you can open or close all of the

windows using the switches on

the driver's door.

The safety anti - pinch function is not

active during these operations.