Peugeot 407 C (2010.5). Instruction — part 11
146
04
9
10
11
12
1
2
3
SETTING RISK AREAS
ALERT PARAMETERS
Turn the dial and select the "Traffi c
info" function if you wish to receive the
traffi c information announcements.
Press the dial to confi rm the selection.
Select "OK" and press the dial to
confi rm.
Press the dial to confi rm the selection.
Turn the dial and select the "Set
risk area parameters" function, then
press the dial to confi rm the warning
message. Press the dial to confi rm the
selection.
Repeat steps 1 to 5 of the guidance option.
These functions are only available if the risk areas have been
downloaded and installed on the system.
Select:
- visual warnings,
- audible warnings with an
announcement duration (in seconds),
- warn during guidance only, then
select OK and press the dial to
confi rm.
NAVIGATION - GUIDANCE
Tick this box for optimum operation of the traffi c information,
diversions will be suggested.
The volume of the Risk Areas POI alerts can only be adjusted
during the alert.
Traffi c info
OK
Set risk area parameters
OK
147
04
1
2
3
4
4
5
6
7
NAVIGATION - GUIDANCE
ACTIONS ON THE MAP
Turn the dial and select the "Map"
function.
Press the MENU button.
Turn the dial and select the
"Map details" function.
Permits selection of the services
which can be seen on the map (hotels,
restaurants, risk areas...).
Press the dial to confi rm the selection.
MAP ORIENTATION
Press the dial to confi rm the selection.
Repeat steps 1 to 3 then turn the
dial and select the "Map orientation"
function.
Select "OK" and press the dial to
confi rm.
Turn the dial and select the orientation
of your choice.
For improved visibility, beyond the scale of 10 km, the map
automatically switches to North Orientation.
Map details
OK
Map orientation
3D view
North direction
Vehicle direction
148
04
2
3
4
5
6
7
NAVIGATION - GUIDANCE
DISPLAYING THE MAP IN A WINDOW
OR IN FULL SCREEN MODE
Turn the dial and select the "Map"
function.
Press the MENU button.
Turn the dial and select the "Display
map" function.
Press the dial to confi rm the selection.
Turn the dial and select the "Map in
window" or "Full screen map" tab.
Press the dial to confi rm the selection.
Select "OK" and press the dial to
confi rm.
Display map
OK
Map in window
Full screen map
149
05
1
2
3
5
6
7
8
4
TRAFFIC INFORMATION
CONFIGURING THE FILTERING OF
TMC ANNOUNCEMENTS
Turn the dial and select the "Traffi c
information" function.
Press the MENU button.
Press the dial to confi rm the selection.
Turn the dial and select the "Filter
traffi c information" function.
Turn the dial and select the fi lter of
your choice.
Select the "Geographic fi lter" function
and press the dial to confi rm.
The fi lters are independent and one replaces the other.
We recommend:
- a fi lter of 6 miles (10 km) around the vehicle in heavy traffi c,
- a fi lter of 30 miles (50 km) around the vehicle or a fi lter on
the route for motorway journeys.
Select "OK" and press the dial to
confi rm.
The TMC (Traffi c Message Channel) messages provide information
relating to the traffi c and the weather conditions, received in real time and
communicated to the driver in the form of audible announcements and
icons on the navigation map.
The guidance system may then suggest a diversion route.
Press the dial to confi rm the selection.
Filter traffi c information
OK
Geographic fi lter
On the route
Around the vehicle
150
05
1
2
3
4
5
6
8
7
TRAFFIC INFORMATION
CONFIGURING THE DISPLAY OF TMC
MESSAGES
Turn the dial and select the "Traffi c
information" function.
Press the MENU button.
Turn the dial and select the "Confi gure
message announcement" function.
Press the dial to confi rm the selection.
Select the "Read messages" tab.
Press the dial to confi rm the selection.
Select "OK" and press the dial to
confi rm.
The Traffi c Information Messages will
be read by the voice synthesiser.
Select the "New message display" tab.
The traffi c information messages
are extended to the fi lters selected
(geographic...) and can also be
displayed when guidance is not active.
We recommend that you do not select the "New message display" tab for
regions with heavy traffi c.
Confi gure message announcement
OK
Read messages
New message display
151
06
1
2
4
3
1
2
4
3
AUDIO/VIDEO
RADIO
Press the BAND button to select a
waveband: FM1, FM2, FMast, AM.
Press the SOURCE button several
times in succession and select RADIO.
Press the LIST button to display
the list of stations received locally
(60 maximum).
To update this list, press for more than
two seconds.
Press one of the buttons to carry out a
manual search of the radio stations.
Briefl y press one of the buttons to
carry out an automatic search of the
radio stations.
RDS
Select "Audio functions" then press
"OK".
Press the MENU button.
RDS, if displayed, enables you to continue listening to the same
station by automatic retuning to alternative frequencies. However,
in certain conditions, coverage of an RDS station may not be
assured throughout the country as radio stations do not cover
100 % of the territory. This explains the loss of reception of the
station during a journey.
Select "Activate RDS" then press "OK".
RDS appears on the screen.
Select the "FM waveband preferences"
function then press "OK".
The external environment (hills, buildings, tunnels, basement car parks, ...)
may block reception, including in RDS mode. This is a normal effect of the
The external environment (hills, buildings, tunnels, basement car parks, ...)
The external environment (hills, buildings, tunnels, basement car parks, ...)
way in which radio waves are transmitted and does not indicate any failure
may block reception, including in RDS mode. This is a normal effect of the
may block reception, including in RDS mode. This is a normal effect of the
of the audio equipment.
way in which radio waves are transmitted and does not indicate any failure
way in which radio waves are transmitted and does not indicate any failure
SELECTING A STATION
FM waveband preferences
Activate RDS
152
06
1
2
AUDIO/VIDEO
MP3 CD
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio
Layer 3, is an audio compression standard which permits the
recording of several tens of music fi les on a single disc.
Empty CDs are not recognised and may damage the system.
It is advisable to restrict fi le names to 20 characters without using
special characters (e.g. " ? ; ù) to avoid any playing or displaying
problems.
The audio system will only play fi les with the extension ".mp3" with
a sampling rate of 22.05 KHz or 44.1 KHz. No other type of fi le
(.wma, .mp4, .m3u...) can be played.
If the player already contains a disc,
press the SOURCE button several
times in succession and select CD to
listen to it.
Insert circular compact discs only. Some anti-pirating
systems, on original discs or CDs copied using
a personal recorder, may generate malfunctions
regardless of the quality of the original player.
Insert an audio CD or an MP3 compilation in the player,
play begins automatically.
The play and display of an MP3 compilation may depend on the
disc burning software and/or the settings used. We recommend
use of the ISO 9660 fi le system format.
Press one of the buttons to select a
track on the CD.
Press the LIST button to display the list
of tracks on the CD or of the folders of
the MP3 compilation.
CD
PLAYING A CD OR AN MP3 COMPILATION
INFORMATION AND ADVICE
In order to be able to play a recorded CDR or CDRW, when
recording, the ISO 9660 level 1.2 or Joliet fi le format is
recommended.
If the disc is recorded in another format, it may not be played
correctly.
It is recommended that the same recording format is always used
for an individual disc, with as low a speed as possible
(4x maximum) for optimum sound quality.
In the particular case of a multi-session CD, the Joliet format is
recommended.
153
06
1
2
1
AUDIO/VIDEO
USING THE USB PORT
USB memory stick (1.1, 1.2 and 2.0):
- the USB memory sticks must be in FAT or
FAT 32 format (NTFS not supported),
- navigation through the fi le base is by means
of the steering mounted controls.
The audio fi les are transmitted from a USB memory
stick to your audio system, to be listened to via the
vehicle's speakers.
Do not connect a hard drive or USB equipment other
than USB memory sticks in FAT 16 or FAT 32 format
(NTFS not supported). This could damage your
installation.
Do not connect a hard drive or USB equipment other than USB
memory sticks in FAT 16 or FAT 32 format (NTFS not supported).
This could damage your installation.
Connect the memory stick to the port, directly or using
a lead. If the audio equipment is switched on, the USB
source is detected as soon as it is connected. Play
begins automatically after a delay which depends on
the capacity of the USB memory stick.
The fi le formats recognised are .mp3 (mpeg1
layer 3 only).
The list of compatible equipment is available from PEUGEOT dealers.
CONNECTING A USB MEMORY STICK
154
06
1
2
4
3
5
1
2
3
AUDIO/VIDEO
PLAYING AN MP3 USB MEMORY
STICK
If another source is being played,
press the SOURCE button several
times in succession and select "USB"
to play it.
Connect a USB memory stick to the port provided.
To eject the USB memory stick, use the short-cut menu (press OK)
or press the MENU button, select "Audio functions", "USB", then
select "Eject USB".
The play and display of an MP3 compilation may depend on the fi le
format used.
Select "USB" and press the dial to
confi rm.
Insert a USB memory stick in the
space provided and press the MENU
button.
JUKEBOX
USB
Select "Complete disc" to copy the
entire USB memory stick and press the
dial to confi rm.
Complete disc
Select "Copy USB to jukebox" and
press the dial to confi rm.
Copy USB to jukebox
Select "Audio functions" and press the
dial to confi rm.
Press one of the buttons to select a
track on the USB memory stick.
Press the LIST button to display the
list of folders on the MP3 USB memory
stick.
COPYING AN MP3 USB MEMORY STICK ONTO THE
HARD DISK
In order to be read, the USB memory stick must be formatted
FAT 16 or 32. The player only reads USB memory sticks.
155
06
1
2
4
3
6
5
AUDIO/VIDEO
COPYING A CD ONTO THE HARD DISK
Select "Audio functions" then select
CD and press the dial to confi rm.
Insert an audio CD or an MP3
compilation and press the MENU
button.
Select "Copy CD to jukebox" and press
the dial to confi rm.
Select the letters one by one and
select "OK" to confi rm.
The "Auto creation" tab automatically copies the CD by default into
an album of the type "album n°...".
It is not possible to copy fi les from the Jukebox to a CD.
The "Stop the CD copy" action does not delete the fi les which have
already been transferred onto the jukebox hard disk.
The audio or MP3 CD is copied onto the hard disk. Copying
may take up to 20 minutes depending on the length the CD.
While copying is in progress, it is not possible to listen to albums
previously copied to the hard disk or to CDs.
If it is not an MP3 CD, the Jukebox automatically compresses
the CD in MP3 format. The compression may take approximately
20 minutes depending on the length the CD. During this
compression phase, it is possible to listen to the CD or to albums
previously copied to the hard disk.
A long press on the SOURCE button starts copying of the CD.
Audio functions
OK
Copy CD to jukebox
Select "Complete CD" to copy the
entire CD and press the dial to confi rm.
Complete CD
To stop the copy, repeat points 2 and 3.
Select "Stop copy" and press the dial to
confi rm.
Stop copy
156
06
1
2
3
4
1
2
3
AUDIO/VIDEO
Select "Audio functions" and press the
dial to confi rm.
Press the MENU button.
RENAMING AN ALBUM
Select the "Jukebox" function and
press the dial to confi rm.
Jukebox
Select the "Jukebox management"
function and press the dial to confi rm.
Jukebox management
Press the LIST button.
Press the SOURCE button several
times in succession and select the
"Jukebox" function.
Press the ESC button to return to the fi rst fi le level.
Turn the dial to select the fi les.
LISTENING TO THE JUKEBOX
Jukebox
157
06
5
6
7
8
AUDIO/VIDEO
Select the "Rename" tab and press the
dial to confi rm.
Select the album to be renamed and
press the dial to confi rm.
Use the alphanumeric keypad to enter the letters of the album title
one by one.
Turn the dial and select the letters of
the album title one by one confi rming
each time by pressing the dial.
Rename
To rename the tracks of an album, follow the same procedure,
selecting the tracks to be renamed.
Use the ESC button to exit from the list of tracks.
Select "OK" and press the dial to
confi rm.
Select the "Delete" function to delete an album or
a track from the Jukebox.
Delete
OK
158
06
1
2
Connect the portable device
(MP3 player…) to the audio sockets
(white and red, RCA type) located in
the glovebox using a suitable audio
cable (JACK or RCA).
Press the MENU button then select the "Confi guration" function,
then "Sounds", then "Activate auxiliary source" to activate the
Peugeot Connect Com audio/telephone auxiliary input.
It is not possible to copy the fi les onto the hard disk via the auxiliary
input.
Press the SOURCE button several
times in succession and select AUX.
USING THE AUXILIARY INPUT (AUX)
AUDIO (JACK/RCA) CABLE NOT SUPPLIED
Display and control is on the portable device.
159
06
2
4
3
7
5
6
AUDIO/VIDEO
VIDEO MENU
Turn the dial and select the "Video"
function.
After connecting the video equipment,
press the MENU button.
Press the dial to confi rm the selection.
Turn the dial and select the "Activate
video mode" function to activate/
deactivate the video.
Press the dial to confi rm the selection.
Turn the dial and select the "Video
parameters" function to set the display
format, the brightness, the contrast
and the colours.
Videos can only be displayed when stationary.
Pressing the DARK button disconnects display of the video.
You can connect video equipment (camcorder, digital camera,
DVD player...) to the three audio/video sockets, located in the glove box.
Pressing the SOURCE button several times in succession permits
the selection of an audio source other than that of the video.
Press the dial to confi rm the selection.
Activate video mode
Video parameters
160
07
1
2
1
2
3
Install the SIM card
in the holder and
then insert it in the
slot.
Open the holder by pressing the button
using the tip of a pen.
Your SIM card must be installed and removed with the Peugeot
Connect Media audio and telematics system switched off and the
ignition off.
To remove the SIM card, repeat step 1.
Confi rm the PIN code by pressing the
# button.
Enter the PIN code on the keypad.
When entering your PIN code, tick the "Store PIN" tab to gain
access to the telephone without having to enter this code when it is
used subsequently.
INSTALLING YOUR SIM CARD
(NOT SUPPLIED)
ENTERING THE PIN CODE
PIN code
161
07
1
2
3
4
CONNECTING A BLUETOOTH
TELEPHONE
Activate the telephone's Bluetooth function.
The last telephone connected is reconnected
automatically.
For reasons of safety, the driver should only carry out operations
which require prolonged attention when the vehicle is stationary
(pairing the Bluetooth mobile telephone to the hands-free kit).
Press the MENU button, select
"Telematics", then "Bluetooth
functions". Press the dial to confi rm
each operation.
To fi nd and change the name of the PEUGEOT audio/telephone,
repeat step 2 then select "Change the name of the audio/
telephone".
Select "Bluetooth activation mode",
then "Activated and visible". Press the
dial to confi rm each operation.
On your telephone, select the name of
the PEUGEOT audio/telephone. Enter the
authentication code (0000 by default).
The services offered by the telephone depend on the network, the SIM
card and the compatibility of the Bluetooth equipment used. Refer to your
telephone's manual and your operator to check which services you have
access to. A list of mobile telephones which offer the best range of services
is available from dealers.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст