Peugeot Partner VP (2007 year). Instruction — part 3
35
Audio equipment -
CASSETTE: AUDIO RB3
Selecting cassette mode
Recommendations for using
casssettes
- Use good quality cassettes.
- Avoid the use of cassettes which
play for longer than 90 minutes.
- Never expose the cassettes to heat
or the direct rays of the sun.
- Re-tighten the tape if necessary
before inserting the cassette in the
player.
- Clean the playing head regularly
with a damp type cleaning cassette.
When a cassette is
inserted, the cassette
player will start auto-
matically.
If a cassette is already inserted,
press button
"SRC" several times to
select cassette mode.
Note: before inserting the cassette,
ensure that the tape is taut.
Ejecting the cassette
Direction of play
The player will play sides 1 and 2 of
the cassette alternately, by automati-
cally reversing the direction of play at
the end of a side.
To manually reverse the direction of
play, press the 2 buttons
F and G half
way.
Fully press buttons
F
and
G to eject the cas-
sette from the player.
Fast forward/rewind
Fully press button
F or G to fast for-
ward or rewind the cassette. At the
end of the fast forward/rewind, the
set plays the current side.
Audio equipment
28 -
AUDIO RD3
Stalk movement
Function
1 - Press (behind)
Increase volume
2 - Press (behind)
Decrease volume
1 + 2 - Simultaneous press
Sound cut-off (mute); restoring of the sound by pressing any button
3 - Press
Automatic search of higher frequencies (radio) - Selection of next track (CD)
4 - Press
Automatic search of lower frequencies (radio) - Selection of previous track (CD)
5 - Press the end
Change of source (radio/CD)
6 - Rotation (clockwise)
Selection of next station stored in memory (radio) - Selection of next CD
7 - Rotation
(anti-clockwise)
Selection of previous station stored in memory (radio) - Selection of previous CD
29
Audio equipment -
Button
Function
A
Radio on/off
B
-
Decrease volume
C
+
Increase volume
D
RDS
RDS function on/off
Press for more than 2 seconds: regional following mode on/off
E
TA
Traffic information priority on/off
Press for more than 2 seconds: PTY function on/off
H
Selection of bass, treble, loudness, sound distribution
and automatic volume correction
I
Increase the setting of the functions associated with button
H
J
Decrease the setting of the functions associated with button
H
L
Manual and automatic search of higher frequency
Selection of next CD track and PTY (radio)
M
MAN
Manual/automatic operation of buttons
L and N
N
Manual and automatic search of lower frequency.
Selection of previous CD track and PTY (radio)
Q
CD
Selection of CD
Press for more than 2 seconds: shuffle
R
Radio
Selection of radio. Selection of FM1, FM2, FMAST, AM wavebands
Press for more than 2 seconds: automatic storing of stations in memory (autostore)
S
Ejection of CD
1 to 6
1 2 3 4 5 6 Selection of station stored in memory - Selection of a CD
Press for more than 2 seconds: storing of a station in memory
Audio equipment
36 -
Ejection of a disc
Shuffle (RDM)
When the CD player is selected, keep
button
Q pressed for two seconds.
The tracks will be played in random
sequence. Pressing the button again
for two seconds returns you to nor-
mal play.
Shuffle mode is de-activated each
time the audio system is switched
off.
After insertion of a
disc, printed face
upwards, the player
starts automatically.
If a disc is already inserted, press
button
Q.
COMPACT DISC: AUDIO RD3
Selecting CD mode
The use of copied compact
discs may cause faults.
Insert circular compact discs
only.
Selecting a track
Press button
L to select the next
track.
Press button
N to return to the start
of the current track or to select the
previous track.
Press button
S to
eject the disc from the
player.
Accelerated play
Keep button
L or N pressed for for-
wards or backwards accelerated
play.
Accelerated play stops as soon as
the button is released.
38 - Ventilation
39
Ventilation -
VENTILATION
1. Windscreen de-icing or
demisting vents.
2. Front window de-icing or
demisting vents.
3. Side vents.
4. Centre vents.
5. Air outlets to front footwells.
De-icing the rear screen and
mirrors
With the engine running, pressing
the control de-ices the rear screen
and mirrors.
It switches off automatically after ap-
proximately twelve minutes.
Pressing the control again switch-
es the de-icing system on again for
twelve minutes.
It is possible to switch off the de-ic-
ing by pressing the control before the
twelve minutes have elapsed.
The air conditioning system does not
contain chlorine and does not present
any danger to the ozone layer.
Operate the air conditioning system
for 5 to 10 minutes, once or twice a
month, to keep it in perfect working
order.
The water created by the air conditioning
condensation is discharged via an open-
ing provided for this purpose. Therefore,
a puddle of water may form underneath
the vehicle when stationary.
If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.
Advice on operation
Select the air distribution most suited
to your requirements and the climatic
conditions.
Gradually adjust the temperature
setting for your comfort.
Position the air control in the "Out-
side Air" position.
For perfectly even air distribution,
take care not to obstruct the exterior
air intake grille and the vents. Check
that the passenger compartment fil-
ter is in good condition.
When the engine is cold, to prevent
too great a distribution of cold air, the
ventilation will increase to its opti-
mum level gradually.
In order to be effective, the air condi-
tioning (
A/C button), should only be
used with the windows closed.
If the interior temperature remains
very high following a prolonged peri-
od parked in the sun, do not hesitate
to ventilate the passenger compart-
ment for a few minutes.
40 -
Turn the control from position
1
to position
4 to obtain an air
flow sufficient to ensure your
comfort.
HEATING
1. Air flow adjustment
2. Air flow adjustment and air
intake control
Turn the control from position
1 to position 4 to obtain an
air flow sufficient to ensure
your comfort.
Intake of exterior air.
This is the normal operating position.
Passenger compartment
isolation.
This position prevents exterior odours
and smoke entering the passenger
compartment.
As soon as possible, position the
control in the exterior air intake
position to prevent misting of the
windows.
Ventilation
41
Ventilation -
To quickly de-ice or demist the wind-
screen and side windows:
- position the air intake control in the
"Outside Air" position,
- turn the temperature and air flow
controls to maximum,
- close the centre vents.
3. Temperature adjustment
To be adjusted to your requirements.
From blue (exterior temperature) to
red (hot).
Windscreen, side windows and
footwells.
4. Air distribution adjustment
Windscreen and side win-
dows (de-icing/demisting).
Footwells.
These settings are recommended for
cold climates.
Centre and side vents.
This setting is recommended for high
temperatures.
42 -
AIR CONDITIONING
The air conditioning does not op-
erate while the air flow adjustment
control is in the minimum position.
Note: to optimise the operation of
the air conditioning, leave the vents
open.
Press the switch to activate
the air conditioning. The indi-
cator light comes on.
2. Air flow adjustment and air
intake control
Turn the control from posi-
tion
1 to position 4 to obtain
an air flow sufficient to en-
sure your comfort.
1. Air conditioning control
The air conditioning is designed to op-
erate in all seasons. In summer, it en-
ables the temperature to be lowered
and in winter, above 0 °C, it increases
the effectiveness of the demisting.
Ventilation
43
Ventilation -
This position prevents exterior odours
and smoke entering the passenger
compartment.
Used simultaneously with the air con-
ditioning, recirculation enables both
heating and cooling performance to
be improved.
Used without the air conditioning,
recirculation may result in misting of
the windows.
As soon as possible, position the
control in the exterior air intake posi-
tion.
To quickly de-ice or demist the wind-
screen and side windows:
- turn the temperature and air flow
controls to maximum,
- close the centre vents,
- position the air intake control in the
"Outside Air" position,
- start the air conditioning.
Intake of exterior air.
4. Air distribution adjustment
Windscreen and side windows
(de-icing/demisting).
This is the normal operating position.
Recirculation of interior air.
3. Temperature adjustment
To be adjusted to your requirements.
From blue (cold when the air condi-
tioning is on) to red (hot).
Windscreen, side windows
and footwells.
Footwells.
These settings are recommended for
cold climates.
Centre and side vents.
This setting is recommended for high
temperatures.
Additional heater
Vehicles which are fitted with an HDI
engine may be fitted with automatic
additional heating to improve your
comfort.
When the engine is idling or the vehi-
cle is stationary, it is quite normal to
notice a high-pitched whistling noise
and a slight emission of smoke and
odour.
Seats and bench seats
44 -
FRONT SEATS
1. Head restraint height
adjustment
To raise or lower the restraint, slide
it.
The adjustment is correct when
the upper edge of the head
restraint is level with the top of
the head.
To remove the head restraint, place it
in the top position, press the tabs and
pull it upwards.
To put it back in position, locate the
stems of the restraint in the holes,
taking care to keep them in line with
the seat back.
2. Armrests
These can be folded back.
3. Seat back angle adjustment
A. Turn the knob.
B. Pull the lever (version with one
sliding side door only).
45
Seats and bench seats -
4. Forwards-backwards
adjustment
Lift the control and slide the seat for-
wards or backwards.
5. Storage drawer (version with
passenger air bag)
There is a storage drawer under the
front passenger seat.
To open it, lift it and pull.
7. Heated seats switch
(according to model)
Press the switch. The temperature is
controlled automatically.
Pressing the switch again stops op-
eration.
Note: the command for activation of
heating of the seat(s) remains mem-
orised for two minutes after the igni-
tion has been switched off.
No person or object must
prevent the seat from return-
ing to its initial position; re-
turn to this position is neces-
sary for the seat to lock in place.
Never drive with the head re-
straints removed; they must
be in place and correctly ad-
justed.
Do not place heavy objects in the
drawers.
6. Access to rear seats
(version with one sliding
side door only)
Lift the control to fold the seat back
and move the seat forwards.
On repositioning, the seat returns to
its initial position (driver’s side).
Seats and bench seats
46 -
REAR SEAT
To fold the rear seat:
- lower the head restraint,
- press control
1 to unlock the seat
back
2,
- fold the seat back
2 onto the seat,
- place the seat in the "folded" position.
When repositioning:
- tilt the folded seat rearwards,
- lift the seat back,
- check that the seat is locked
correctly.
Take care not to trap the seat
belts.
Seats and bench seats
48 -
GENERAL POINTS RELATING
TO CHILD SEATS
Although one of PEUGEOT’s main
criteria when designing your vehicle,
the safety of your children also de-
pends on you.
For maximum safety, please follow
these precautions:
- in accordance with Directive 2003/
20,
all children under the age of
12 or less than one metre fifty
tall must travel in approved child
seats suited to their weight, on
seats fitted with a seat belt or ISO-
FIX mountings*.
-
statistically, the safest seats in
your vehicle for the transpor-
tation of children are the rear
seats,
-
a child weighing less than 9 kg
must travel in the "rearwards-
facing" position both in the front
and in the rear.
PEUGEOT recommends that chil-
dren should travel in the
rear seats
of your vehicle:
-
"rearwards-facing" up to the age
of 2,
-
"forwards-facing" over the age of
2.
INSTALLING A CHILD SEAT
USING A THREE POINT SEAT
BELT
"Rearwards-facing"
When a "rearwards-facing" child seat
is installed on the
front passenger
seat, it is essential that the passen-
ger air bag** is disarmed. Otherwise,
the child would risk being seri-
ously injured or killed if the air bag
were to inflate.
"Forwards-facing"
When a "forwards-facing" child seat
is installed on the
front passenger
seat, adjust the vehicle’s seat to the
intermediate longitudinal position
with the seat back upright and leave
the passenger air bag armed**.
* The rules for transporting children
are specific to each country. Con-
sult the current legislation in your
country.
** According to model.
Intermediate longitudinal position
49
Seats and bench seats -
Passenger air bag OFF**
CHILD SEATS RECOMMENDED BY PEUGEOT
PEUGEOT offers a complete range of recommended child seats which
are secured using a
three point seat belt:
Group 0: from birth to 10 kg
Group 0+: from birth to 13 kg
L1
"BRITAX
Babysure"
(E11 0344117)
Installed in the
rear-facing
position.
L2
"ROMER
Baby-Safe Plus"
(E1 03301146)
Installed in the
rear-facing
position.
Groups 1, 2 and 3: from 9 to 36 kg
L3
"KIDDY Life"
(E1 03301135)
For the safety of young children (from
9 to 18 kg), PEUGEOT recommends
use of the restraining cushion.
Groups 2 and 3: from 15 to 36 kg
L4
"RECARO Start’’
(E1 03301108).
L5
"KLIPPAN Optima"
(E17 030007)
From the age
of 6 years
(approximately
22 kg), the booster
is used on its own.
** According to version.
Seats and bench seats
50 -
INSTALLING CHILD SEATS SECURED USING THE SEAT BELT
In accordance with the European regulation (Directive 2000/3), this table indicates the options for the installation of child
seats secured using the seat belt and universally approved (a), in accordance with the weight of the child and the seat in the
vehicle:
(a) Universal child seat: child seat
which can be installed in all
vehicles using the seat belt.
(b) Group 0: from birth to 10 kg.
Seat
Weight of the child and indicative age
Below 13 kg
(groups 0 (b) and 0+)
Up to 1 year approx
From 9 to 18 kg
(group 1)
From 1 to 3 years
approx
From 15 to 25 kg
(group 2)
From 3 to 6 years
approx
From 22 to 36 kg
(group 3)
From 6 to 10 years
approx
Front passenger
seat (c)
U
U
U
U
Rear side seat
U
U
U
U
Rear centre seat
U
U
U
U
(c) Consult the legislation in force
in your country before installing
your child on this seat.
U Seat suitable for the installation
of a child seat secured using
a seat belt and universally
approved, "rear facing" and/or
"forward facing".
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст