Peugeot Expert (2022 year). Manual in english — page 4
Ease of use and comfort
Armrest(s)
► To recline the backrest, pull the control
Folding the backrest to the
upwards (from the rear, lower the handle).
The armrest has notches.
table position
► Release the control when the desired position
is reached.
Moving forward or backward
Ensure that nothing (examples: bag,
case, toy, folding and sliding table) is
► Pull the armrest fully up.
interfering with the operation to fold the
► Lower it fully.
backrest.
► Raise the armrest to the desired notched
position.
► Put the head restraints in the low position.
Adjusting the angle of the
Two controls are provided for moving the seat
backrest
forward and backward:
The backrest can be adjusted to several
► From the rear, pull the strap without going
positions.
beyond the point of resistance and push the seat
forward or pull it backward.
► From the front, raise the control and slide the
► From the rear, lower the handle to release the
seat forward or backward.
backrest.
► From the front, raise the handle to release
the backrest.
► Fold the backrest onto the cushion.
Removing
► Move the seat forwards for access to the
strap.
► Fold the backrest to the table position.
64
Ease of use and comfort
Refitting
3
► Fit the front part on the rails.
► From the rear, pull the strap beyond the point
► Tip the seat to align the rear of the guides in
of resistance to release the anchorages and
the rails.
tip the seat forwards to place it in the vertical
► Slide the seat forwards or backwards until it
position.
engages in the notches.
Before refitting the seat in the vehicle,
► Raise the backrest.
► Remove the seat through the side door for
pull the strap fully to ensure that the
row 2 or through the rear for row 3.
Check that the seat has correctly locked
latching mechanism has engaged.
on the floor when returned to the seating
Changing the direction of
position.
the seat
Fixed crew cab
The crew cab is made up of a fixed bench seat,
seat belts, storage compartments (depending
on equipment) and side windows. It is separated
from the loading area by a high-strength
Do not use the strap to lift the seat.
partition.
When the seat is removed, your can rotate it by
Rear bench seat
180°.
► Check that nothing is obstructing the rails.
This ergonomic bench seat has three seats.
65
Ease of use and comfort
The two outer seats are fitted with ISOFIX
Under seat cushion storage
mountings.
wells
For more information on the ISOFIX
mountings, refer to the corresponding
section.
Storage compartment
Depending on the country of sale, the wells can
be dismantled and removed through the rear so
that bulky objects can be stowed underneath the
bench seat.
Do not attach anything to the cab fixing
structure.
Do not exceed the number of passengers
indicated on the registration certificate.
In the rear, the loading area is intended for
If applicable, a storage compartment is available
carrying goods only.
at the front, underneath the bench seat.
You are advised to place the goods or heavy
If the vehicle is so equipped, they are located
objects as far forwards as possible in the
underneath the centre and outer left-hand seats.
loading area (towards the cab) and secure
To gain access to it from the cab, tip the required
them by means of straps using the stowing
seat forwards.
rings on the floor.
The rear seat belt frames are not designed to
secure the load being carried.
66
Ease of use and comfort
► Using handle B, guide the movement of the
Never put your hand underneath the
Folding crew cab
3
bench seat until it locks in the folded position.
bench seat to guide it downwards, as you
could get your fingers trapped.
Bench seat position
Ensure there are no objects or feet beneath
the bench seat or obstructing the anchorage
system, preventing the assembly from being
The crew cab has a folding bench seat, seat
correctly locked.
belts and side windows. It is separated from
the loading area by the bench seat by a high-
strength grille.
Do not attach anything to the cab fixing
structure.
Folded position
Do not exceed the number of passengers
indicated on the registration certificate.
In the rear, the load space is intended for
carrying goods only.
It is recommended to place goods or heavy
objects as far forwards as possible in the load
space (towards the cab) and secure them by
means of straps using the stowing rings on
the floor.
The rear seat belt frames are not designed to
secure the load being carried.
► To put the bench seat back in place, pull the
strap C to unlock the bench seat, then release
the strap.
► Then, using only the handle B, guide the
descent of the backrest to tip the assembly until
it locks in the bench seat position.
► With just one hand, pull one of the straps A
upwards to fold the bench seat.
67
Ease of use and comfort
Interior fittings
To avoid any risk of jamming the pedals:
Glove box
- Only use mats which are suited to the
It houses the front passenger airbag deactivation
fixings already present in the vehicle; these
Mats
switch and can hold a bottle of water, the
fixings must be used.
vehicle's handbook pack, etc.
- Never fit one mat on top of another.
Fitting
The use of mats not approved by PEUGEOT
Never drive with the glove box (if
may interfere with access to the pedals and
equipped) open when a passenger is
hinder the operation of the cruise control/
sitting at the front. It may cause injury during
speed limiter.
sharp deceleration.
The approved mats have two fasteners
located underneath the seat.
Storage compartment
This can hold a bottle of water, the vehicle's
In row 2 and row 3
documentation, etc.
When fitting it on the driver's side, only use the
mountings present on the carpet.
The other mats are simply laid over the carpet.
Removing/refitting
► To remove it on the driver's side, move
the seat as far back as possible and give the
fasteners a quarter turn.
► To open the storage compartment, press the
left-hand end of the control and guide the lid to
its open position notch.
If your vehicle is so equipped, it is lit when the lid
Use the Velcro straps to attach the transverse
is opened.
mat in row 2 with the longitudinal mats in rows
► To refit it, position the mat and replace the
2 and 3.
When driving, keep the storage
fasteners, giving them a quarter turn.
compartment closed. Otherwise, there is
► Check that the mat is secured correctly.
68
Ease of use and comfort
a risk of injury in the event of an accident or
Any liquid which could spill risks causing
For more information on the Front seats,
3
sudden braking.
an electrical short circuit and therefore a
and in particular placing the backrest in
potential fire.
the "table" position, refer to the corresponding
section.
Front door storage pockets
"Aircraft" type tables
Liquids carried in an open vessel (e.g. a
12 V socket(s)
cup or mug) could be spilt, presenting a
Depending on version.
risk of damage on contact with the controls in
the dashboard and centre console. Be
careful.
Fitted to the back of each front seat.
Upper glove box
This is located in the dashboard, behind the
steering wheel.
► To use the table, lower it fully until it locks in
the low position.
► To stow it, raise the table to the high position,
passing the point of resistance.
On the passenger side, do not forget to
Press the control to open the lid (depending on
fold the table up before placing the seat
version) then guide it to its fully open position.
in the "table" position.
To close it, guide the lid then press the centre
Do not place hard or heavy objects on
gently.
the table. They could become dangerous
projectiles in the event of emergency braking
or impact.
69
Ease of use and comfort
USB socket
For more information about how to use this
equipment, refer to the sections describing
the audio and telematics systems.
220 V socket
Depending on version, a 220 V/50 Hz socket
The socket can be used to connect a portable
(maximum power: 120 W) is located underneath
device or a USB memory stick.
the front right-hand seat and therefore
► To connect a 12 V accessory (maximum
The socket reads audio files that are sent to your
accessible from row 2.
power: 120 Watts), lift the cover and plug in a
audio system to be played through the vehicle's
This socket works with the engine running, as
suitable adapter.
speakers.
well as in STOP mode of Stop & Start.
Observe the maximum power rating to
These files can be managed using the steering-
avoid damaging the accessory.
mounted controls or those on the audio system.
The USB socket also allows a
The connection of an electrical device
smartphone to be connected by
not approved by PEUGEOT, such as a
Android Auto® or CarPlay®, enabling certain
USB charger, may adversely affect the
smartphone applications to be used on the touch
operation of vehicle electrical systems,
screen.
causing faults such as poor radio reception or
For best results, use a cable made or approved
interference with displays in the screens.
by the device manufacturer.
These applications can be managed using the
steering-mounted controls or the audio system
controls.
► Lift the cover.
When the USB socket is used, the
► Check that the indicator lamp is on green.
portable device charges automatically.
► Connect your multimedia or other electrical
While charging, a message is displayed if the
device (telephone charger, laptop computer,
power drawn by the portable device exceeds
CD-DVD player, bottle warmer, etc.).
the current supplied by the vehicle.
70
Ease of use and comfort
In the event of a malfunction, the
► To install it, insert the guides into their
3
green indicator lamp flashes.
housings.
Have it checked by a PEUGEOT dealer or a
In the event of sudden deceleration,
qualified workshop.
objects placed on the load space cover
Connect only one device to the socket at
can turn into projectiles.
a time (do not use an extension lead or
multi-socket) and only connect devices with
Class II insulation (indicated on the device).
Loading area fittings
Do not use devices with metallic cases.
Stowing rings
If the power consumption becomes too
high and when required by the vehicle's
electrical system (particular weather
conditions, electrical overload, etc.), the
power supply to the socket will be cut off; the
Use the stowing rings on the rear floor to secure
green indicator lamp goes off
loads.
As a safety precaution in case of sharp braking,
Load space cover
we recommend placing heavy objects as far
forwards as possible (i.e. near the cab).
We recommend immobilising the load by firmly
securing it using the stowing rings present on
the floor.
► To remove it, lift it up.
71
Ease of use and comfort
Load retaining partition
Recommendations on
Firmly secure all parts of the load using
the stowing rings on the floor of the
loading
loading area.
For more information on the Interior fittings
The weight of the load must comply with
and in particular on the stowing rings, refer to
the Gross Train Weight (GTW).
the corresponding section.
For more information on Engine technical
data and towed loads, refer to the
corresponding section.
To avoid the risk of injury or accident, the
load must be made stable so that it
cannot slide, tip over, fall or be projected. To
If you are using a carrying system (roof
do this, use only retaining straps that conform
bars/roof rack), comply with the
to current standards (DIN, for example).
maximum loads associated with this system.
For more information on putting straps in
For more information on Roof bars/Roof
place, refer to the manufacturer’s user guide.
rack, refer to the corresponding section.
To prevent the load from sliding, there must
not be any empty spaces between the load
Make sure that the size, shape and
items and the vehicle wall panels.
volume of the loads carried are
As well as the straps, optimise the stability
compatible with the highway code and safety
of the load with stable handling equipment
regulations and do not impair the driver’s field
(wedges, rigid blocks of wood or padding).
of vision.
On the floor, behind the front seats, a vertical
When washing your vehicle, never clean
partition protects the driver and front passengers
The load must be evenly distributed in
the inside directly using a water jet.
against the risk of load movement.
the loading area so as not to interfere
Steel or glazed partitions separate the loading
with driving the vehicle.
area from the cab.
Place the load close to the side wall panels,
or push it against the side wall panels
between the wheel arches.
However, it is recommended that heavy
objects are placed as close to the cab as
possible as a precaution in case of sharp
braking.
72
Ease of use and comfort
Lower fixings (behind row 2)
Seating area fittings
3
High load retaining net
This allows the use of the entire loading capacity,
up to the roof:
- behind the front seats in row 1, when the rear
seats (and bench seats) in rows 2 and 3 are
► On each side in row 2, insert the fixings in the
folded or removed,
floor anchorages (as shown above).
- behind the rear seats (and bench seats) in row
If your vehicle has seats and bench seats or
► Use the stowing rings.
2, when the rear seats (and bench seats) in row
individual seats on rails:
3 are folded or removed.
Fit the net
Unclip the upper fixing covers and secure the
Upper fixings
lower fixings (as previously described).
► Fold (table position) the seats and bench
seats in rows 2 and 3 (according to equipment).
► Close the rear heating and air conditioning
vents (depending on the equipment you have).
► Unroll the high load retaining net.
► Position the net upper fixings in the
corresponding anchorages in the roof (first one
side, then the other).
► Unclip the anchorage cover in the roof on
► Fully extend the straps.
each side.
► On each side in row 2, insert the fixings in the
► On each side, attach the bottom fixings of the
floor anchorages then turn them a quarter turn to
Lower fixings (behind row 1)
net to the lower anchorages (behind row 1) or in
lock them in place (as shown above).
the stowing rings (behind row 2).
If your vehicle has fixed one-piece bench seats
Place them as close as possible to the end of
► Tension the straps to extend the net.
or seats and bench seats:
the rail.
► Check that the net is attached securely and
properly extended.
73
Ease of use and comfort
Never use the ISOFIX ring provided for
Blinds
fixing the strap of a child seat with Top
Tether.
Opening/Closing
Rear windows in row 2
If fitted to your vehicle, the side windows in row 2
can be opened.
► Pull the tab A and attach the blind to the hook
B.
Always guide the blind slowly, using the
tab, when raising or lowering it.
► Take one of the blinds by its grip and push it
back or pull it forwards to the desired position.
Panoramic sunroof
While driving, the windows must be closed or
secured at one of the notches.
► Squeeze the two controls then move the
window sideways.
This is fitted with two manual and independent
blinds, which improve thermal and acoustic
For more information on the Child lock
comfort.
on rear windows, refer to the
corresponding section.
Side blinds
Fitted to the windows in row 2, these protect the
passenger compartment from the sun's rays.
74
Ease of use and comfort
Retractable sliding table
Storage
► Release the control when it is in the desired
3
position.
Allure, Business VIP
► Check that the table is secured on the runner.
If this is not the case, move the assembly slightly
to the next notch on the runner.
You can move the table in both the open
and stowed position. However, to ensure
safety, it is advised that you handle the
assembly in the stowed position.
► Slide back the cover for access to 11 litres of
storage space.
For the table to run smoothly, ensure that
no objects are blocking the space used
The storage space can only support a
by the runner on the floor.
maximum weight of 3 kg; do not exceed
Before manoeuvring the table, check that
this maximum load in use.
there is nothing on the table.
The table has a central storage space covered
Moving forward or backward
by a lid. When deployed, this device becomes
Unfolding
a table with two table tops on which you can
place objects. The central part has two cup/
can holders and can also be used to hold small
objects (e.g. credit card, pen).
The assembly is mounted on a runner allowing it
to be positioned either in row 2 or row 3.
► Operate the control on the top and pull the
table assembly up until it clicks into place.
► Lift the control (without going beyond the
► Pull each table top fully up then pivot them on
point of resistance) and slide the assembly
each side into the horizontal position.
forwards or backwards.
75
Ease of use and comfort
Folding
Liquids carried in an open vessel (a cup
Changing the direction
or mug) could be spilt, presenting a risk.
► Raise each table top, going beyond the point
Be careful.
of resistance, to the vertical position.
Never use the table in this position while the
► Push each table top down into its housing
vehicle is being driven.
until it clicks into place.
Removal
With the table removed, you can turn it 180°.
Remove a seat to make this easier.
► Push the control then tip the table assembly
downward until it clicks into place.
Refitting
Before stowing the table tops, check that
► Raise the control fully to release the
► Check that there is no object obstructing the
they are clear. Before tipping the
anchorages and tip the table assembly forward.
runner and preventing proper locking.
assembly down, check that the two table tops
► Remove the table assembly through the
have clicked home in the low position and that
sliding door in row 2.
there is nothing in the cup holder area (such
Check that there is nothing in the space
as a can or pen).
around the runner on the floor, so that
the table disengages cleanly.
Cup holders
Two cups or cans and small objects (such as
a credit card, portable ashtray or pen) can be
carried in the middle of the unfolded table.
76
Ease of use and comfort
► Check that the control is in the upper position
- risk of damaging the surface and starting a
3
(locking mechanism armed). If not, lift this control
fire!
fully to arm the mechanism.
► Place the front of the table on the runner.
When the table is deployed, each table
► Taking care not to interfere with the control,
top can support a maximum of 10 kg. If
tip the assembly towards the rear until you hear
you exceed the maximum weight limit, you
it lock into place.
risk damaging part or all of the table.
► Check that the assembly is fully locked into
Never lift the table when it is between
the runner. If not, slide the assembly gently along
individual seats; you risk damaging the table
the runner until it meets the next notch.
tops.
Incorrect use of the table can cause
Check that the table is fully locked into
serious injury.
the runner - risk of injury in the event of
Never use the table in the open or deployed
an accident or sudden braking.
position while the vehicle is in motion. In the
► Release the control until the guide locks into
event of sudden braking, any object placed on
the runner.
the table can become a projectile.
Ensure that the table is correctly stowed in
Be careful of passengers' feet when
the low position before setting off.
manoeuvring the assembly.
Never use the table tops as seats or lean on
them.
A label attached to the side of the table
Storage off the runner
serves as a reminder of this.
If removing the table from the vehicle for
storage, ensure that it is placed in a
clean area, in order to avoid introducing any
foreign bodies into the mechanisms.
The table must be placed outside the vehicle,
on a flat and level surface, resting on the
Before moving the table or an individual
guide so as not to damage visible parts.
seat forwards or backwards, make sure
Never place hot objects such as
that the seat's backrest is upright and the
Caution, when out of the vehicle, the
saucepans or frying pans on the table
table is stowed.
table leans to the right or left when
placed on a surface.
77
Ease of use and comfort
When towing a large load on a steep gradient
► To ensure correct operation of the
in high temperatures, switching off the air
air conditioning system, have it checked
conditioning increases the available engine
according to the recommendations in the
power, enhancing the towing capacity.
Manufacturer’s service schedule.
Avoid driving for too long with the
When stowing the table tops, never place
ventilation off or with prolonged operation
your hand inside the slide area - risk of
of interior air recirculation. Risk of misting and
trapping your fingers! Use the handle
deterioration of the air quality!
Contains R134A fluorinated
provided.
greenhouse gases
If the interior temperature is very high
Depending on version and country of sale, the
after the vehicle has stood for a long
air conditioning system may contain R134A
Heating and Ventilation
time in the sunshine, air the passenger
fluorinated greenhouse gases. Gas capacity
compartment for a few moments.
0.5 kg (+/- 0.025 kg), GWP index 1430 (CO2
Advice
Put the air flow control at a setting high
equivalent: 0.715 t).
enough to quickly change the air in the
Using the ventilation and air
passenger compartment.
Stop & Start
conditioning system
The heating and air conditioning systems
► To ensure that air is distributed evenly,
Condensation created by the air
only work when the engine is running.
keep the external air intake grilles at the base
conditioning results in a discharge of
Temporarily deactivate the Stop & Start
of the windscreen, the nozzles, the vents, the
water underneath the vehicle. This is perfectly
system to maintain a comfortable temperature
air outlets and the air extractor in the boot
normal.
in the passenger compartment.
free from obstructions.
For more information on Stop & Start, refer
► Do not cover the sunshine sensor located
Servicing the ventilation and air
to the corresponding section.
on the dashboard; this sensor is used to
conditioning system
regulate the automatic air conditioning
system.
► Ensure that the passenger compartment
ECO driving mode
► Operate the air conditioning system for at
filter is in good condition and have the filter
Selecting this mode reduces electrical
least 5 to 10 minutes once or twice a month to
elements replaced regularly.
energy consumption, but restricts the
keep it in good working order.
We recommend using a composite passenger
performance of the heating and air
► If the system does not produce cold air,
compartment filter. Its specific active additive
conditioning systems, although it does not
switch it off and contact a PEUGEOT dealer
helps protect against polluting gases and bad
deactivate them.
smells.
or a qualified workshop.
78
Ease of use and comfort
Heating
Temperature
air recirculation for a few moments by pressing
3
button 4. Then restore the intake of exterior air.
► Turn the thumbwheel 1 from "LO" (cold)
to "HI" (hot) to adjust the temperature to your
The air conditioning does not operate
requirements.
when the air flow adjustment is set to off.
Air distribution
Switching the system off could result in
► Pressing button 3 successively directs the air
discomfort (humidity, misting).
Manual air conditioning
flow towards:
The air conditioning system only operates with
- windscreen, side windows and footwells,
the engine running.
- footwells,
Dual-zone automatic air
- central vents, side vents and footwells,
- windscreen, side windows, central vents, side
conditioning
vents and footwells,
- central and side vents,
- windscreen and side windows (demisting or
defrosting).
1. Temperature.
2. Air flow.
Air conditioning
3. Air distribution.
1.
Temperature.
With the engine running, the air conditioning is
4. Interior air recirculation.
2.
Air flow.
designed to operate effectively in all seasons,
5. Air conditioning on/off.
3.
Air distribution.
with the windows closed.
4.
Recirculation of interior air.
It enables you to:
5.
Air conditioning on/off.
Air flow
- lower the temperature in summer,
6.
Automatic comfort mode.
► Turn the thumbwheel 2 to obtain a
- enhance the effectiveness of the demisting
7.
Visibility programme.
comfortable air flow.
function in winter, above 3°C.
8.
“Mono” function or Rear heating and air
If you set the air flow control to the
On/Off
conditioning on/off (depending on version).
minimum position (off), the temperature
► Press button 5 to activate/deactivate the air
in the vehicle will no longer be controlled. A
conditioning system.
Automatic comfort mode
slight air flow can still be felt however,
When the air conditioning is in operation, to
► Press the "AUTO" button 6 to toggle the
resulting from the forward movement of the
cool the air more quickly, you can use interior
mode.
vehicle.
79
Ease of use and comfort
The active mode appears in the display screen,
Temperature is no longer controlled. A slight air
exceed the minimum value 14 or the
as described below:
flow can still be felt, however, resulting from the
maximum value 28.
Ensures soft, quiet operation by limiting
forward movement of the vehicle.
► Push button 1 down until "LO" is
air flow.
► Press button 2 "+" to switch the system on
displayed or up until "HI" is displayed.
Offers the best compromise between a
again.
comfortable temperature and quiet
"Mono" function
operation.
Temperature
Provides dynamic, effective air flow.
The driver and front passenger can each set the
The comfort setting for the passenger's side
can be indexed to the driver's comfort setting
temperature to suit their preferences.
(mono-zone).
The value shown on the display is a level
When the engine is cold, the air flow will
of comfort, not a temperature in Celsius or
only increase to its optimum level
Fahrenheit.
gradually, to avoid distributing too much cold
► Push button 1 down to decrease the value or
► Press the corresponding button 8 to activate/
air.
up to increase it.
deactivate the function.
In cold weather, it prioritises the distribution of
The indicator lamp in the button is on when the
warm air to the windscreen, the side windows
A setting of around 21 provides optimum
function is activated.
and the footwells only.
comfort. Depending on your
The function is deactivated automatically if a
requirements, a setting between 18 and 24 is
passenger uses the temperature control.
normal.
Manual mode
In addition, we recommend avoiding left/right
Rear heating - air
It is possible to make a different choice from that
setting differences of more than 3.
offered by the system by changing a setting.
conditioning
The other functions will still be automatically
On entering the vehicle, if the interior
managed.
temperature is significantly colder or
The "AUTO” symbol disappears if you change a
warmer than the comfort value setting, there
► Press the corresponding button 8 to activate/
setting.
is no need to alter the value displayed in
deactivate the function.
order to reach the required level of comfort.
Deactivating the system
For more information, refer to the Rear
The system compensates automatically and
► Press button 2 "-" until the fan symbol
heating - air conditioning section.
corrects the temperature difference as quickly
disappears.
as possible.
This action switches off all of the functions of the
system.
For maximum cooling or heating of the
passenger compartment, it is possible to
80
Ease of use and comfort
Visibility programme
Switching the system off could result in
► Press this button to activate/deactivate
3
discomfort (humidity, misting).
the function (confirmed by the
► Press the "visibility" button 7 to demist or
illumination/extinction of the indicator lamp).
de-ice the windscreen and side windows more
quickly.
Air distribution
The system automatically manages the air
Front demisting
► Pressing button 3 successively directs the air
conditioning, air flow and air intake, and provides
flow towards:
- defrosting
optimum distribution towards the windscreen and
- windscreen, side windows and footwells,
side windows.
These markings on the control panel
- footwells,
► Press the "visibility" button 7 again to stop
indicate the positioning of the controls for
- central vents, side vents and footwells,
the programme.
rapid demisting or defrosting of the windscreen
- windscreen, side windows, central vents, side
Or
and side windows.
vents and footwells,
► Press the "AUTO" button 6 to return to the
- central and side vents,
automatic comfort programme.
Heating or manual air
- windscreen and side windows (demisting or
defrosting).
conditioning
Air conditioning
With the engine running, the air conditioning is
Air flow
designed to operate effectively in all seasons,
► Press the buttons 2 to increase/decrease the
with the windows closed.
air flow.
It is used to:
The air flow symbol (a fan) appears. It is filled in
- lower the temperature in summer,
or emptied gradually, according to the value set.
- increase the effectiveness of the demisting in
winter, above 3°C.
Interior air recirculation
On/Off
The intake of exterior air prevents the formation
► Press button 5 to activate/deactivate the air
of mist on the windscreen and side windows.
conditioning system.
Recirculating the interior air isolates the
When the air conditioning is in operation, to
passenger compartment from outside odours
cool the air more quickly, you can use interior
and fumes and allows the desired passenger
air recirculation for a few moments by pressing
compartment temperature to be achieved more
button 4. Then restore the intake of exterior air.
rapidly.
► Set the air flow, temperature and air
The air conditioning does not operate
distribution controls to the appropriately marked
when the air flow adjustment is set to off.
positions.
81
Ease of use and comfort
► For air conditioning, press this button;
Demisting/de-icing the
Rear heating - air
its indicator lamp comes on.
rear screen and/or the
conditioning
Dual-zone automatic air
door mirrors
conditioning
► Press one of these buttons to switch on/off
► Press this button to demist or defrost
rear screen and door mirror demisting/de-icing
the windscreen and side windows more
(depending on version).
quickly.
The indicator lamp in the button comes on when
The system automatically manages the air
the function is activated.
conditioning, air flow and air intake, and provides
Demisting/de-icing switches off automatically to
optimum distribution towards the windscreen and
prevent excessive power consumption.
side windows.
► To turn it off, press this button
Switch off demisting/de-icing as soon
again or press "AUTO".
as you no longer consider it necessary,
The system restarts with the values in use before
as decreased power consumption in turn
it was deactivated.
reduces energy consumption.
Demisting/de-icing only operates with the
engine running.
If your vehicle is fitted with a rear air conditioning
unit located in the roof, this system distributes
conditioned and heated air via a distribution rail
and individual outlets.
82
Ease of use and comfort
Air flow
Additional heating/
Programming
3
► Turn the dial to increase or decrease
With a 3D Connected Navigation, use the remote
ventilation system
the air flow.
control to start/stop the additional heating.
Only available for Diesel vehicles.
With a Bluetooth® audio system or a Audio
Comfort temperature
System with Touch Screen, use the remote
- Turn the thumbwheel from blue (cold)
control to start/stop the additional heating and/or
to red (hot) to modulate the temperature
adjust the pre-heating times.
to your liking.
With Bluetooth® audio system
This control simultaneously adjusts the
temperature and the location of the air delivery:
- blue: the air is delivered mainly at roof level,
- red: the air is delivered mainly by the vent
► Press the MENU button to access the
located in row 3 on the right.
main menu.
Heating
► Select "Pre-heat. / Pre-ventil.".
Activation/Deactivation
This is an additional and separate system which
► Select "Activation" and, if necessary, for
heats the passenger compartment and improves
programming, “Parameters".
defrosting performance.
► Select "Heating" to heat the engine and
This indicator lamp is lit while the system
passenger compartment or "Ventilation" to
is programmed or set in operation
ventilate the passenger compartment.
remotely via the remote control.
It flashes during the whole duration of the
heating and goes off at the end of the heating
cycle or when stopped using the remote control.
Depending on version, this button is accessible
► Select:
at the front, from the dual-zone automatic air
Ventilation
• the first clock to set/save the time at which
conditioning control panel.
This system allows ventilation of the passenger
the pre-heating temperature will be reached,
► Press this button to activate/deactivate
compartment with exterior air to improve the
• the second clock to set/save a second time
the operation of the rear controls.
temperature experienced on entering the vehicle
at which the pre-heating temperature will be
in summer.
reached,
83
Ease of use and comfort
Using these two clocks and depending
► Press the Settings tab to select Heating
On
on the season you can, for example,
mode to heat the engine and passenger
► Pressing and holding this button starts
select one or the other start time.
compartment or Ventilation to ventilate the
the heating immediately (confirmed by the
A message on the screen confirms your
passenger compartment.
green indicator lamp coming on briefly).
choice.
► Then programme/save the activation time for
each selection.
Switching off
► Press OK to confirm.
► Pressing and holding this button stops
With Audio System with Touch
the heating immediately (confirmed by the
Screen
You must allow at least 60 minutes
temporary illumination of the red indicator lamp).
between programming operations.
Press Connect-App to display the main
The indicator lamp in the remote control flashes
page.
for about 2 seconds if the vehicle has not
Then press "Programmable heating/
Depending on the outside temperature, a
received the signal.
ventilation".
certain amount of pre-conditioning time is
Then repeat the command after having changed
► Select the "Status" tab to activate/deactivate
necessary in order to reach the programmed
location.
the system.
temperature by the stored activation time.
► Select the "Other settings" tab to choose
This pre-conditioning time lasts up to 45 min.
Changing the battery
the "Heating" mode, to heat the engine and
The indicator lamp in the remote control will
passenger compartment, or "Ventilation" to
Long-range remote control
change to orange if the battery charge is low.
ventilate the passenger compartment.
If the indicator lamp is not on, the battery is
This enables you to switch the heating in
► Then set/save the time at which the
discharged.
the passenger compartment on or off from a
preheating temperature will be reached for each
distance.
selection.
The remote control has a range of about 0.6
Press this button to save.
miles (1 km) in open country.
With 3D Connected Navigation
In the Applications > Car Apps menu:
► Select Temperature conditioning.
► Press the Status tab to activate/deactivate
the system.
84
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст