Peugeot Landtrek (2023 year). Manual in english — page 7
In the event of a breakdown
► Allow the engine to run for at least
It is not necessary to disconnect the
8
30 minutes, with the vehicle stationary, so that
battery.
the battery reaches an adequate state of charge.
► Switch the ignition off.
Driving immediately without having
► Switch off all electrical consumers (audio
reached a sufficient level of charge may
system, lighting, wipers, etc.).
affect some of the vehicle's functions (e.g.
Petrol engine
Stop & Start).
► Switch off charger B before connecting
Charging the battery using a
the cables to the battery, so as to avoid any
battery charger
dangerous sparks.
For optimum service life of the battery, it is
► Ensure that the charger cables are in good
essential to maintain an adequate state of
condition.
charge.
► Lift the plastic cover on the (+) terminal, if the
In some circumstances, it may be necessary to
vehicle has one.
charge the battery:
► Connect the cables of charger B as follows:
- When using the vehicle mainly for short
• the positive (+) red cable to the (+) terminal
HDi Diesel engine
journeys.
of battery A.
- If the vehicle is to be taken off the road for
• the negative (-) black cable to earth point C
several weeks.
on the vehicle.
Consult a PEUGEOT dealer or a qualified
► At the end of the charging operation, switch
workshop.
off charger B before disconnecting the cables
from battery A.
To charge the vehicle's battery yourself,
use only a charger compatible with
Disconnecting the battery
lead-acid batteries with a nominal voltage of
In order to maintain an adequate state of
12 V.
charge for starting the engine, we recommend
disconnecting the battery if the vehicle is to be
Follow the instructions provided by the
BlueHDi Diesel engine
unused for an extended period.
manufacturer of the charger.
Before disconnecting the battery:
Never reverse polarities.
► Close all openings (doors, windows).
127
In the event of a breakdown
► Switch off all electricity-consuming devices
Following reconnection
When the vehicle is towed with its engine
(audio system, wipers, lamps, etc.).
After reconnecting the battery, turn on the
off, there is no longer braking and steering
► Switch off the ignition and wait for 4 minutes.
ignition and wait 1 minute before starting the
assistance.
After accessing the battery, it is only necessary
engine, to enable the electronic systems to
to disconnect the (+) terminal.
initialise.
A professional towing service must be
If minor problems nevertheless persist following
called if:
Screwed terminal
this operation, contact a PEUGEOT dealer or a
- Broken down on a motorway or main road.
Disconnecting the (+) terminal
qualified workshop.
- Not possible to put the gearbox into neutral,
Referring to the relevant section, reinitialise
unlock the steering, or release the parking
certain equipment:
brake.
- Remote control key or electronic key
- Not possible to tow a vehicle with an
(depending on version).
automatic gearbox, with the engine running.
- Electric windows.
- Towing with only two wheels on the ground.
- Date and time.
- Four-wheel drive vehicle.
- Preset radio stations.
- No approved towbar available.
Before towing the vehicle, it is essential
Towing the vehicle
to put the vehicle in free-wheeling mode.
► Depending on equipment, lift the plastic cover
Procedure for having your vehicle towed over a
For more information on Changing to free-
on the (+) terminal.
short distance if necessary.
wheeling, refer to the corresponding section.
► Loosen the nut A as much as possible to
unlock the clamp B.
General recommendations
► Remove clamp B by lifting it off.
Observe the legislation in force in the
With a manual gearbox, place the gear
country where you are driving.
lever in neutral.
Reconnecting the (+) terminal
Ensure that the weight of the towing vehicle is
With an automatic gearbox, place the gear
► Loosen the nut A as much as possible.
higher than that of the towed vehicle.
selector in position N.
► Refit the clamp B on the (+) terminal.
The driver must remain at the wheel of the
Failure to adhere to this instruction may lead
► Tighten the nut A to lock the clamp B.
towed vehicle and must have a valid driving
to damage to some braking components and
► Depending on equipment, lower the plastic
licence.
the lack of braking assistance on restarting
cover on the (+) terminal.
When towing a vehicle with all four wheels on
the engine.
Do not use force when tightening nut A
the ground, always use an approved towing
as the clamp may be damaged.
arm; rope and straps are prohibited.
The towing vehicle must move off gently.
128
In the event of a breakdown
8
Towing constraints
Type of vehicle
Front wheels on the
Rear wheels on the
Flatbed
4 wheels on the ground
(gearbox and
ground
ground
with chain or cable
transmission)
Manual
4x2
Manual
4x4
Automatic
4x2
Automatic
4x4
4x2: 2-wheel drive.
4x4: 4-wheel drive.
In case of battery failure, it is essential to use a flatbed (excluding manual gearbox).
129
In the event of a breakdown
Towing your vehicle
► Switch on the hazard warning lamps on both
vehicles.
Access to the front hooks
► Move off gently, drive slowly and only for a
short distance.
Never use the front hooks to tow another
broken down or stuck vehicle.
Do not tow the vehicle by the rear bumper.
The vehicle must be towed on tarmac and
hard roads. The vehicle must be towed for a
short distance and at a speed not exceeding
19 mph (30 km/h).
The tow hooks are located under the front
bumper.
To be towed:
► Securely install cables or chains to the tow
hooks.
► Put the gearbox into neutral.
Failure to observe this instruction could
result in damage to certain components
(braking, transmission, etc.) and to the
absence of braking assistance the next time
the engine is started.
Automatic gearbox: never tow the vehicle
with the driving wheels on the ground
and the engine off.
► Unlock the steering and release the parking
brake.
► Depending on version, place the transmission
selector in the 2H position (2-wheel drive).
130
Technical data
The maximum authorised nose weight
Engine technical data and
9
corresponds to the weight permitted on the
towed loads
towball.
When exterior temperatures are high, the
Engines
vehicle performance may be limited in
The engine characteristics are given in the
order to protect the engine. When the exterior
vehicle's registration document, as well as in
temperature is higher than 37°C, reduce the
sales brochures.
towed weight.
Only the values available at the time of
publication are presented in the tables.
Towing even with a lightly loaded vehicle
Contact a PEUGEOT dealer or a qualified
can adversely affect its road holding.
workshop to obtain missing values.
Braking distances are increased when towing
The maximum power corresponds to the
a trailer.
value type-approved on a test bed, under
When using a vehicle to tow, never exceed
conditions defined by legislation.
a speed of 62 mph (100 km/h) (observe the
local legislation in force).
For more information, contact a PEUGEOT
dealer or a qualified workshop.
Weights and towed loads
The weights and towed loads relating to
the vehicle are indicated on the registration
document, as well as in sales brochures.
These values are also indicated on the
manufacturer's plate or label.
For more information, contact a PEUGEOT
dealer or a qualified workshop.
The GTW (Gross Train Weight) and towed load
values indicated are valid up to a maximum
altitude of 1,000 metres. The towed load value
must be reduced by 10% for each additional
1,000 metres of altitude.
131
Technical data
Engines and towed loads - Petrol
Engines
2.4 l - 210 Petrol
Gearboxes
BVM6
BVA6
(Manual 6-speed)
(Automatic 6-speed)
Model codes
FBTGTE
FBTGTL
FBTGTT
FBTGTZ
Transmission
4x2
4x4
4x2
4x4
Cubic capacity (cc)
2,398
2,398
Max. power: EC standard (kW)
155
155
Fuel
Unleaded
Unleaded
Braked trailer (within the GTW limit) (kg)
3,000
2,500*
on a 10% or 12% gradient
Unbraked trailer (kg)
750
750
Maximum authorised nose weight (kg)
120
120
Engine oil capacity (in litres)
4.5
4.5
(with oil filter change)
Type C3 5W30
* Limited to a GTW of 4,500 kg in the event of arduous use (towing on a gradient).
132
Technical data
Engines and towed loads - HDi Diesel
9
Engines
1.9 T - 150 HDi
Gearboxes
BVM6
(Manual 6-speed)
BVA6
(Automatic 6-speed)
Model codes
FDAHDE
FDAHDL
FDAHDT
FDAHDZ
Transmission
4x2
4x4
4x2
4x4
Cubic capacity (cc)
1,910
1,910
Max. power: EC standard (kW)
110
110
Fuel
Diesel
Diesel
Braked trailer (within the GTW limit) (kg)
3,000
3,000
on a 10% or 12% gradient
Unbraked trailer (kg)
750
750
Maximum authorised nose weight (kg)
120
120
Engine oil capacity (in litres)
5.5
5.5
(with oil filter change)
Type C3 5W30
133
Technical data
Engines and towed loads - BlueHDi Diesel
Engines
2.2 T - 180 BlueHDi
Gearboxes
BVM6
BVA6
(Manual 6-speed)
(Automatic 6-speed)
Model codes
FF4HZF
FF4HZM
FF4HY1
Transmission
4x2
4x4
4x4
Cubic capacity (cc)
2,179
2,179
Max. power: EC standard (kW)
132
132
Fuel
Diesel
Diesel
Braked trailer (within the GTW limit) (kg)
3,500
3,500
on a 10% or 12% gradient
Unbraked trailer (kg)
750
750
Maximum authorised nose weight (kg)
120
120
Engine oil capacity (in litres)
6.6
6.6
(with oil filter change)
Type C3 5W30
134
Technical data
Dimensions (mm)
Identification markings
9
These dimensions have been measured on an
Various visible markings for vehicle identification
unladen vehicle.
and vehicle search.
A. Vehicle Identification Number (VIN), in the
right-hand rear wheel arch.
Stamped on the chassis.
B. Vehicle Identification Number (VIN), on the
dashboard.
Printed on an adhesive label visible through the
windscreen.
C. Manufacturer's label.
Affixed to the right-hand door.
Bears the following information:
- Manufacturer’s name.
- Country and date of manufacture.
- Vehicle model and engine type.
- European whole vehicle type approval
number.
- Vehicle Identification number (VIN).
- Gross vehicle weight (GVW).
- Gross train weight (GTW).
- Maximum weight on the front axle.
- Maximum weight on the rear axle.
* With longitudinal bars.
D. Tyres label.
135
Technical data
Affixed to the left-hand door.
Bears the following information about the tyres:
- Tyre pressures, unladen and laden.
- Tyre specification, made up of the dimensions
and type.
- Spare tyre inflation pressure.
The vehicle may be originally equipped
with tyres with higher load and speed
indices than those indicated on the label,
without affecting tyre pressure (on cold tyres).
In the event of a change in the type of tyres,
contact a PEUGEOT dealer for the tyre fits
approved for the vehicle.
136
Bluetooth® audio system
Long press: memorisation of a radio station in
Bluetooth® audio system
Menus
10
"CH4”
Rotate: adjust volume
Telephone :
Short press: volume deactivation/
Short press: ending a call
activation
Radio 5:
Long press: on/off
5
Short press: selection of the radio station
Radio 1:
1
memorised in "CH5”
Short press: selection of the radio station
Long press: memorisation of a radio station in
memorised in "CH1”
"CH5”
Long press: memorisation of a radio station in
Audio :
"CH1”
Short press: return to the previous folder (first
Telephone :
track in the folder)
Short press: answering a call
Radio 6:
Radio 2:
6
The different functions and settings
2
Short press: selection of the radio station
Short press: selection of the radio station
described vary according to the version
memorised in "CH6”
memorised in "CH2”
and configuration of your vehicle.
Long press: memorisation of a radio station in
Long press: memorisation of a radio station in
"CH6”
"CH2”
Audio :
As a safety measure and because it
Audio :
Short press: move to the next folder (first track in
requires sustained attention by the driver,
Short press: change from normal play mode to
the folder)
the pairing of a Bluetooth® mobile telephone
random play mode
Short press: change of sound source
with the Bluetooth® hands-free system of your
Radio 3:
audio system must be done with the vehicle
3
(radio, Bluetooth® audio streaming if
Short press: selection of the radio station
phone connected, or USB if USB key
stationary and the ignition on.
memorised in "CH3”
connected)”
Long press: memorisation of a radio station in
Long press (3 seconds minimum): display of the
Your audio system is coded in such a
"CH3”
standby screen
way that it will only operate in your
Audio :
Long press (10 seconds minimum): restart to
vehicle.
Short press: change from normal play mode to
restore factory settings
All work on the system must be carried out
repeat play mode
Short press: enter RDS selection mode
exclusively by a dealer or qualified workshop,
Radio 4:
RDS
4
(AF/TA/PTY)
to avoid any risk of electrocution, fire or
Short press: selection of the radio station
Short press on the arrows: OFF/ON
mechanical faults.
memorised in "CH4”
The choice is automatically saved if no action is
taken for 5 seconds.
137
Bluetooth® audio system
Radio:
Radio: selection of the next radio station (among
RDS, if activated, allows you to continue
Short press: Manual step-by-step search
the memorised radio stations).
listening to the same station by
up/down for radio stations
Audio: go to the next track.
automatically retuning to alternative
Long press: automatic search of a radio station
frequencies. However, in certain conditions,
Audio :
RDS station tracking may not be possible
Radio
Short press: go to the previous/next track
nationwide, as radio stations do not always
Long press: fast navigation in a track
cover the entire country. This can explain the
Short press: selection of the wave ranges
Selecting a station
loss of reception of a station during a journey.
(FM1/FM2/FM3/AM1/AM2)
Press this button to select the radio.
Radio/Audio:
Procedure
Short press: enter configuration mode
Press consecutively to select the
Press this button several times to access
(time, sound environment, language settings,
waveband (FM1/FM2/FM3/AM1/AM2).
RDS
the RDS mode (AF - TA - PTY).
etc.)
Short press: manual search up/down for
Press these buttons to activate/deactivate
Short press on the arrows: combination of
radio stations
the RDS mode (AF - TA - PTY).
settings.
Long press: automatic search for radio stations
AF: When the alternative frequency function
The settings are automatically saved if no action
is taken for 5 seconds.
Memorising a station
is activated, the system selects the best RDS
frequency (region code) of the station being
1
2
3
4
5
6
listened to. However, in certain conditions,
Steering mounted controls
following this station is not guaranteed over the
Once the radio station has been selected, press
whole country, because radio stations do not
and hold one of these buttons to save it.
cover 100% of the area. When the reception
is weak, the frequency switches to a regional
Change of sound source (radio,
RDS
station.
Bluetooth® audio streaming if phone
The external environment (hills,
PTY: the PTY function selects a type of
connected, or USB if USB key connected)”.
buildings, tunnels, car parks,
programme that radio stations broadcast. All this
Volume adjustment.
underground, etc.) may block reception,
information is transmitted via the RDS signal on
including in RDS tracking mode. This is a
some radios.
Telephone: ending a call.
Radio: selection of the previous radio
normal effect of the way in which radio waves
station (among the memorised radio stations).
are transmitted and does not indicate any
Audio: go to the previous track.
failure of the audio system.
Telephone: answering a call.
138
Bluetooth® audio system
Normal play mode is activated by default.
The version of software in the audio system may
Media
10
Activate/deactivate random play mode.
not be compatible with the generation of your
2
Apple® player.
USB socket
Activate/deactivate repeat play mode.
3
Insert a USB memory stick in the USB
Information and advice
socket.
The system changes automatically to "USB"
Choosing and playing a track
Only use USB memory sticks formatted
source and the "USB" symbol appears at the top
to FAT 32 (File Allocation Table).
Short press: go to the previous/next track.
left of the screen.
Long press: fast-forward/rewind in a track.
Access the previous folder.
It is recommended that you use genuine
To protect the system, do not use a USB
5
Apple® USB cables to guarantee correct
hub.
Access the next folder.
operation.
6
Any additional devices connected to the
system must comply with the standard
Bluetooth® audio streaming
Telephone
applicable to the product and/or the standard
Streaming allows music files on the telephone to
IEC 60950-1.
be played via the vehicle's speakers.
Pairing a Bluetooth®
Connect the telephone.
When the USB socket is used, the
telephone
(Refer to the "Pairing a Bluetooth® telephone"
portable device charges automatically.
section).
As a safety measure and because it
Activate the streaming source by pressing
requires sustained attention by the driver,
Play mode
this button.
the pairing of a Bluetooth® mobile telephone
If the telephone supports the function. The audio
The play modes available are:
with the Bluetooth® hands-free system of your
quality depends on the quality of transmission by
- Normal: the tracks are played in order,
audio system must be done with the vehicle
the telephone.
according to the classification of the selected
stationary and the ignition on.
files.
Connecting Apple® players
- Random: the tracks in an album or folder are
Activate the telephone's Bluetooth®
played in a random order.
Connect the Apple® player to the USB socket
function and ensure that it is "visible to
- Random on all media: all of the tracks saved
using a suitable cable (not supplied).
all" (telephone configuration).
in the media are played in random order.
Play starts automatically.
- Repeat: the tracks played are only those from
The classifications available are those of the
the current album or folder.
portable device connected (artists / albums /
genres / playlists).
139
Bluetooth® audio system
The services available depend on the
Receiving a call
network, the SIM card and the
An incoming call is announced by a ring and a
compatibility of the Bluetooth® devices used.
superimposed display on the screen.
Refer to your telephone’s user guide and your
The volume of the telephone is independent of
service provider to check which services you
the volume of the radio and the media.
are able to access.
Answer the call.
1
Procedure from the telephone
Accept the call using the steering-
mounted controls.
Select the name of the system in the list
of detected devices.
Ending a call
The connection is made automatically.
A message appears on the screen confirming the
During a call, press this button.
4
pairing as well as the Bluetooth® symbol at the
top left of the screen.
End the call (using the steering-mounted
controls).
If the pairing procedure fails, we
recommend deactivating and then
reactivating the Bluetooth® function on the
telephone.
Information and advice
Go to the Brand's website for more
information (compatibility, more help,
etc.).
Managing connections
The telephone connection automatically
includes hands free operation and audio
streaming.
140
Peugeot Connect 10" Touchscreen
To perform system and map updates,
Peugeot Connect 10"
Steering mounted controls
11
visit a Peugeot dealer.
Touchscreen
Short press: change of multimedia
source.
Long press: access to smartphone voice
GPS navigation -
First steps
commands via the system (available only via the
Applications - Multimedia
With the engine running, a short press
CarPlay® or Android Auto).
mutes the sound. A long press (3 sec)
Decrease volume.
audio system - Bluetooth®
puts the system on standby. A very long press
telephone
(10 sec) restarts the system.
Increase volume.
With the ignition off, a short press turns the
The functions and settings described
system on.
Telephone: refuse an incoming call, hang
vary according to the vehicle version and
Increase or decrease the volume using the
up a call in progress.
configuration, as well as the country of sale.
thumbwheel.
Radio: short press, access to the previous
Use the main menu buttons on the touch screen
memorised station; long press, automatic search
For safety reasons and because they
to access the sub-menus.
for the previous station.
require sustained attention by the driver,
Press this button to return to the menu
Media: short press, access to the previous track/
the following operations must be carried out
carousel.
video; long press, fast-rewind in the track/video.
with the vehicle stationary and the ignition
Slide your finger on the touch screen from
Telephone: answering an incoming call.
on:
top to bottom to display a set of quick
Radio: access to the next memorised
- Pairing the smartphone with the system via
settings (Bluetooth® connection, volume,
station; long press, automatic search for the next
Bluetooth.
brightness) and notifications.
station.
- Using the smartphone.
Press this button to directly access the
Media: short press, access to the next track/
- Connection to the CarPlay®, MirrorLinkTM
quick settings (depending on equipment).
video; long press, fast-forward in the track/video.
or Android Auto applications (certain
Press the back arrow to go back a level.
applications interrupt their display while the
vehicle is moving).
- Watching a video (the video stops when the
The touch screen is of the "capacitive"
vehicle starts to move again).
type.
- Changing the system settings and
To clean the screen, use a soft, non-abrasive
configuration.
cloth (e.g. spectacles cloth) with no additional
product.
Do not use sharp objects on the screen.
Do not touch the screen with wet hands.
141
Peugeot Connect 10" Touchscreen
Menus
Radio
Vehicle settings
FM
Navigation
102.7
MHz
102.7
100.1
97.0
96.3
94.6
93.7
Select a radio station.
Activate, deactivate or configure certain
vehicle functions.
Enter navigation settings and choose a
Telephone
File management
destination.
Music player
Connect a mobile phone via Bluetooth®.
Access audio, video or image files stored
locally or on a USB device.
Hard drive capacity: 10 GB.
Select an audio source.
Settings
Access information about the media
®
CarPlay
currently being played.
Run certain smartphone applications via
the CarPlay® function.
MirrorLinkTM
Run certain smartphone applications via
the MirrorLinkTM function.
Customise the display, update the
system, adjust the audio and
Bluetooth® settings.
142
Peugeot Connect 10" Touchscreen
Android Auto
Select “Current trip” to open another
Press “Search” to perform an automatic search
11
menu and perform various actions on the
for radio stations.
Run certain smartphone applications via
current route planned.
Press this button to return to the menu
the Android Auto function.
Select “My places” for quick access to
carousel.
saved places.
Radio reception may be affected by the
Navigation
Select “My trips” to display the preferred
use of electrical equipment not approved
routes.
by the Brand, such as a USB charger
Navigation home screen
Select “Parking” to display the various
connected to the 12 V socket.
parking options in the region.
Press Navigation to display the
The external environment (hills, buildings,
Select “Service station” to display the
navigation home screen.
tunnels, basement car parks, etc.) may block
different service stations on the current
Press "Search" to enter an address or a
reception. This is a normal effect of the way in
route or near the current location.
name.
which radio waves are transmitted and does
Select “Settings” to display map, display,
Press this button to display the 3D/2D
not indicate any failure of the audio system.
vehicle type, voice, voice guidance
mode.
language and destination options.
Press this button to activate/deactivate
Select this button to display details on
Memorising a station
the volume or only the alerts.
software versions as well as legal
Press this button to display the main
Select a radio station or frequency.
information. Details of the Open Source software
menu of the various options.
Press this button to memorise the station.
libraries used and their licence URLs.
Select this button to customise the
Main menu
Press “Local radio” to display the
settings screen.
Press Navigation to display the
memorised stations.
navigation home screen.
Changing the waveband
Press this button to display the main
Radio
menu of the various options.
To change the waveband, press "Band"
Select “Search” to enter an address,
displayed at the bottom of the screen.
Selecting a station
name or certain points of interest.
Press Radio to display the main page.
Select “Add home” using an address or
Music player
by selecting a place on the screen.
Press one of the buttons to carry out a
Select “Recent destinations” to display
manual search up/down for radio
Selecting the source
the last destinations searched.
frequencies.
Press Music player to display the main
Or
page.
143
Peugeot Connect 10" Touchscreen
Select a source:
Reduce the number of non-music files and the
Procedure from the telephone
"USB" to play files from a USB stick.
number of folders to reduce the waiting time.
Select the system name in the list of
Playlists are updated whenever the ignition
detected devices.
"Local" to play locally stored files.
is switched off or a USB memory stick is
The connection is made automatically.
connected. The audio system memorises these
If the pairing procedure fails, we
"BT" to play audio streaming files.
lists, which will subsequently load faster if they
recommend deactivating and then
have not been changed.
reactivating the Bluetooth® function on the
Streaming allows you to listen to the
telephone.
audio feed from your smartphone.
Telephone
The Bluetooth profile must be activated.
Procedure from the system
If play does not start automatically, it may be
Pairing a Bluetooth®
necessary to start the audio playback from
Press Telephone to display the primary
the smartphone.
telephone
page.
Control is from the portable device or by using
Press "BT settings" .
As a safety measure and because it
the system's touch buttons.
requires sustained attention by the driver,
Once connected in streaming mode, the
Activate the Bluetooth connection.
the pairing of a Bluetooth® mobile telephone
smartphone is considered to be a media
with the Bluetooth® hands-free system of your
source.
Press “Available devices”.
audio system must be done with the vehicle
The list of telephones detected is
stationary and the ignition on.
displayed.
USB port
Select the name of the telephone in the list.
Insert the USB memory stick into the USB
Activate the telephone's Bluetooth®
port or connect the USB device to the
function and ensure that it is "visible to
Automatic reconnection
USB port using a suitable cable (not supplied).
all" (telephone configuration).
On return to the vehicle, if the last telephone
connected is present again, it is automatically
To protect the system, do not use a USB
The services available depend on the
recognised and within about 30 seconds
hub.
network, the SIM card and the
of switching on the ignition, the pairing is
The system builds playlists (in temporary
compatibility of the Bluetooth® devices used.
established automatically (with Bluetooth
memory); this operation can take from a
Refer to your telephone’s user guide and your
activated).
few seconds to several minutes at the first
service provider to check which services you
connection.
are able to access.
144
Peugeot Connect 10" Touchscreen
Deleting a telephone
Press Call then enter the number using
MirrorLinkTM or Android Auto applications, refer
11
In the list of paired telephones, press the
the numeric keypad.
to the "Ease of use and comfort" section.
bin next to the telephone to be deleted.
Press this button to make the call.
For the list of suitable smartphones, visit
the Brand's national website.
Receiving a call
Calling a contact
An incoming call is announced by a ring and a
Synchronising a smartphone enables
display overlaid on the screen.
Press Telephone to display the main
users to display applications that support
page.
Accepting the call
the smartphone’s MirrorLinkCarPlay®, TM or
Select "Contacts".
Press this button on the steering-mounted
Android Auto technology on the vehicle’s
Search then select the desired contact in the
controls to answer the call.
screen. For CarPlay® technology, the
displayed list.
Or
CarPlay® function must first be activated on
Press this button to call.
Select "Answer" on the touch screen.
the smartphone.
Unlock the smartphone for the communication
process between the smartphone and the
Refusing the call
Calling a recently used
system to work.
Press this button on the steering-mounted
number
As principles and standards are constantly
controls to refuse the call.
Press Telephone to display the main
changing, we recommend keeping the
Or
page.
smartphone's operating system up-to-
Select "End call" on the touch screen.
Select "Call".
date, together with the date and time on
The list of last numbers dialled is displayed on
the smartphone and the system.
the right of the screen.
Making a call
Select the contact.
Connectivity
Using the telephone is strongly
It is always possible to make a call
Press on one the CarPlay®, MirrorLinkTM
discouraged while driving.
directly from the telephone; as a safety
or Android Auto menus to access the
Park the vehicle.
measure, first park the vehicle.
corresponding functions.
Make the call using the steering-mounted
controls.
CarPlay® smartphone
Applications
connection
Calling a new number
USB ports
Depending on country.
Press Telephone to display the main
Depending on equipment, for more information
page.
on the USB ports compatible with CarPlay®,
145
Peugeot Connect 10" Touchscreen
On connecting the USB cable, the
Press "MirrorLinkTM" to start the
Press "Android Auto" to start the
CarPlay® function deactivates the
application in the system.
application in the system.
system's Bluetooth® mode.
Depending on the smartphone, it may be
During the procedure, several screen
The "CarPlay" function requires the use of
necessary to activate the "MirrorLinkTM"
pages relating to certain features are
a compatible smartphone and compatible
function.
displayed.
applications.
During the procedure, several screen
Accept to start and complete the connection.
pages relating to certain features are
Access to the menus for the system is possible
Connect the USB cable. The smartphone
displayed.
at any time using the dedicated buttons.
charges when connected by the USB
Accept to start and complete the connection.
cable.
There may be a pause before
Once the connection is established, a page is
A message appears on the smartphone.
applications become available,
displayed, showing the applications already
Read it and then confirm with the "Authorise"
depending on the quality of the network.
downloaded to the smartphone that are
button.
compatible with MirrorLinkTM technology.
Press "CarPlay" to display the CarPlay®
Access to the menus for the system is possible
interface.
Settings
at any time using the dedicated buttons.
MirrorLinkTM smartphone
There may be a pause before
System settings
applications become available,
connection
Press Settings to display the main page.
depending on the quality of the network.
Depending on country.
Select "System".
The "MirrorLinkTM" function requires the
Android Auto smartphone
use of a compatible smartphone and
- To change the language, select “Languages”.
compatible applications.
connection
- To set the date and time automatically, choose
Check the compatibility of the telephone on
Depending on country.
the time zone corresponding to the country in
the Brand's website (services).
Install the "Android Auto" application on
which the vehicle is being driven in "Time zone".
When connecting a smartphone to the
the smartphone via "Google Play".
Then choose the time display format (12h/24h).
system, we recommend enabling
The "Android Auto" function requires the use
- To adjust the tone when touching the screen,
Bluetooth® on the smartphone.
of a compatible smartphone and compatible
select "Key tone".
Connect the USB cable. The smartphone
applications.
- To adjust the volume of the touch screen and
charges when connected by the USB
telephone calls, move the "Automatic volume
Connect the USB cable. The smartphone
cable.
control" and "Mobile" sliders.
charges when connected by the USB
cable.
146
Peugeot Connect 10" Touchscreen
Display
- Press "Add device" to update the list of
11
detected telephones.
Press Settings to display the main page.
Customising the theme
Select "Display".
Press Settings to display the main page.
- To adjust the screen brightness, move the
Select "Customise".
"Brightness" slider.
- Activate or deactivate video playback while
Choose one of the themes from those offered.
driving.
- To configure the display when the screen is
Updating the system
off, choose Digital, Analogue or Black.
To perform system updates, visit a Peugeot
Audio settings
dealer.
Press Settings to display the main page.
Restoring factory settings
Select “Audio settings” then “Treble” or
Press Settings to display the main page.
“Medium” or “Bass”.
Press Reset to restore the default settings.
Select “Restore system’s factory
settings”.
BT settings
Press “Restore system’s factory settings” to
restore the initial touch screen settings.
Press Settings to display the main page.
Select “BT settings”.
Activate or deactivate the Bluetooth®
search.
Activate or deactivate the synchronisation
of the contacts on the paired telephone.
- Press "Local name" to change the name of
the system.
- Manage paired telephones in "Suitable
devices”.
147
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст