Peugeot Landtrek (2023 year). Manual in english — page 3
Ease of use and comfort
Front reading lamps
Rear armrest
3
► With the ignition on, activate the
corresponding reading lamp by pressing control
2.
Take care not to place anything in
contact with the courtesy lamps.
Rear courtesy lamp
► Press button 3 to switch the courtesy lamp
The armrest incorporates two cup holders.
3. Rear courtesy lamp
on/off.
Hooks
Front courtesy lamp
Rear fittings
► Press this button, the courtesy lamp
DOOR
gradually lights up:
• when unlocking the vehicle,
• when removing the key from the ignition,
• when opening a door,
• when the remote control locking button is
activated, in order to locate your vehicle.
It switches off gradually:
- when the vehicle is locked,
Installed on the back of each front seat, they are
- when the ignition is switched on,
used to hang shopping bags.
- 30 seconds after the last door is closed.
► Press this button again to permanently switch
Take care to only hang lightweight bags
the courtesy lamp off.
under 4 kg.
43
Ease of use and comfort
Storage boxes
Loading bay fittings
Stowing rings
Storage boxes are provided in the floor, under
the cushions of the rear bench seat.
They may contain the vehicle’s tools.
► To open them, raise the corresponding
seat cushion and lift the carpet (depending on
version).
1.
12 V accessory socket (max. 120 W)
For more information on the Rear bench seat,
(depending on version)
and especially on tilting the seat cushions, refer
2.
Stowing rings
to the corresponding section.
3.
Tipper body lighting (depending on version,
integrated in the third brake lamp or on the
safety roll bar)
* Depending on version.
4.
Load retaining partition or safety roll bar
Use the stowing rings on the side panels to
(depending on version)
secure loads.
As a safety precaution in case of sharp braking,
we recommend placing heavy objects as far
forwards as possible (i.e. near the cab).
We recommend immobilising the load by firmly
securing it using the stowing rings present on the
sides of the loading bay.
44
Ease of use and comfort
Load retaining partition
Make sure that the size, shape and
To prevent the load from sliding, there must
3
volume of the loads carried are
not be any empty spaces between the load
compatible with the highway code and safety
items and the vehicle wall panels.
regulations and do not impair the driver’s field
As well as the straps, optimise the stability
of vision.
of the load with stable handling equipment
(wedges, rigid blocks of wood or padding).
The load must be evenly distributed in
the loading area so as not to interfere
When washing the vehicle, never clean
with driving the vehicle.
the interior directly with a water jet.
Place the load close to the side wall panels,
or push it against the side wall panels
12 V accessory socket
between the wheel arches.
However, it is recommended that heavy
(Depending on version)
objects are placed as close to the cab as
On the structure of the loading bay, behind the
possible as a precaution in case of sharp
rear window, a vertical separation protects the
braking.
driver and passengers against the risk of load
movement.
Secure all loads firmly using the stowing
Bars separate the loading area from the cab.
rings present on the side panels of the
Retractable hooks, integrated into the upper bar,
loading bay.
► To connect a 12 V accessory (maximum
are used to secure the loads in the loading bay.
For more information on the Loading bay
power: 120 W), lift the cover and plug in a
fittings, and in particular on the stowing
suitable adaptor.
Recommendations on
rings, refer to the corresponding section.
► Switch the ignition on.
loading
To avoid the risk of injury or accident, the
The connection of an electrical device
The weight of the load must comply with
load must be made stable so that it
not approved by PEUGEOT, such as a
the Gross Train Weight (GTW).
cannot slide, tip over, fall or be projected. To
USB charger, may adversely affect the
For more information on Engine technical
do this, use only retaining straps that conform
operation of vehicle electrical systems,
data and towed loads, refer to the
to current standards (DIN, for example).
causing faults such as poor radio reception or
corresponding section.
For more information on putting straps in
interference with displays in the screens.
place, refer to the manufacturer’s user guide.
45
Ease of use and comfort
Loading bay lighting
The loading bay lighting is no longer
available if the speed of the vehicle is
above 2 mph (3 km/h).
Depending on version, the loading bay lighting is
integrated into the third brake lamp or positioned
at each end of the safety roll bar.
This lighting only operates when the vehicle is
stationary.
► When the vehicle is stationary, press this
button to activate/deactivate the loading bay
lighting function (confirmed by the illumination/
extinction of the indicator lamp).
46
Lighting and visibility
► Push the lighting control stalk to switch
Switching on the foglamps is prohibited
Exterior lighting control
4
between dipped and main beam headlamps.
in clear weather or in rain, both day and
stalk
In lamps off or "AUTO" modes, depending on
night. In these situations, the power of their
version, and in sidelamps mode, pull the lighting
beams may dazzle other drivers. They must
Main lighting
control stalk to switch the main beam headlamps
only be used in fog or falling snow (rules may
on directly ("headlamp flash").
vary depending on country).
Do not forget to switch off the foglamps when
Display
they are no longer necessary.
Illumination of the corresponding indicator
lamp on the instrument panel confirms that the
Front foglamps/Rear
selected lighting is on.
A fault with a lamp is signalled by the
foglamps
permanent illumination of this warning
lamp, accompanied by the display of a message
and an audible signal.
Automatic illumination of lamps/daytime
Rear foglamps
running lamps
They only work if the dipped or main beam
Lamps off (ignition off)/
headlamps are on.
Daytime running lamps (engine running)
Sidelamps only
They operate with the sidelamps, dipped or main
beam headlamps on.
Dipped or main beam headlamps
► Rotate the ring to this position to
switch on the front foglamps.
Headlamp dipping
► Then, rotate the ring beyond this position:
• once to switch on the rear foglamps,
• a second time to switch off the rear
► Rotate the ring to turn it on/off.
foglamps.
When the lighting is switched off automatically
The ring returns to the front foglamps position.
("AUTO" position) the foglamps and the dipped
► Rotate the ring to the "OFF" position to switch
beam headlamps remain on.
off the front foglamps.
47
Lighting and visibility
If the lighting is switched off automatically (with
after the lamps have been on for a few
Cornering lighting
AUTO model) or the dipped beam headlamps
minutes.
This system makes use of the beam from a front
are switched off manually, the foglamps and
foglamp to illuminate the inside of a bend, when
sidelamps remain on.
Never look too closely at the light beam
the main or dipped beam headlamps are on
► Rotate the ring to the "OFF" position to switch
of LED technology lamps - risk of serious
(urban driving, winding road, junctions, parking
off the foglamps; the sidelamps will then switch
eye injury!
manoeuvres).
off.
Switching off of the lighting when the
Travelling abroad
ignition is switched off
Vehicles equipped with halogen
When the ignition is switched off, all of the
headlamps:
lamps turn off immediately, except for the
If planning to use your vehicle in a country
dipped beam headlamps if automatic guide-
that drives on the other side of the road, the
me-home lighting is activated.
dipped beam headlamps must be adjusted to
avoid dazzling oncoming drivers. Consult a
PEUGEOT dealer or a qualified workshop.
Without/With cornering lighting
Switching on the lamps after
switching off the ignition
Switching on/off
To reactivate the lighting control, rotate the
Daytime running lamps/
This system starts:
ring, depending on version, to the "OFF"
Sidelamps
- when the corresponding direction indicator is
position - lamps off, or to the "AUTO" position,
then to the desired position.
These lamps at the front and rear of the vehicle
switched on.
If the driver's door is opened, a temporary
light up automatically when the engine starts.
or
audible signal warns the driver that the lamps
They perform the following functions:
- from a certain angle of rotation of the steering
are on.
- Daytime running lamps (lighting control stalk
wheel.
They will go off automatically after a period
at position "OFF" or "AUTO" with adequate
It becomes inactive:
of time that depends on the level of charge in
ambient light).
- below a certain angle of rotation of the
the battery (entering energy economy mode).
- Sidelamps (lighting control stalk at position
steering wheel.
"AUTO" with low ambient light or "Sidelamps
- above approximately 25 mph (40 km/h).
only" or "Dipped/main beam headlamps").
- when reverse gear is engaged.
In some weather conditions (e.g. low
temperature or humidity), misting on the
internal surface of the glass of the headlamps
and rear lamps is normal, and will disappear
48
Lighting and visibility
As soon as the brightness returns to a sufficient
Direction indicators
Headlamp beam height
4
level or after the windscreen wipers are switched
adjustment
off, the lamps are switched off automatically.
Switching on/off
► Left or right: depending on version, lower/
raise or raise/lower the lighting control stalk,
► To activate it, turn the ring to the "AUTO"
To avoid dazzling other road users, the height
beyond the point of resistance.
position.
of these headlamp beams must be adjusted
► To deactivate it, turn the ring to any other
Parking lamps
according to the load in the vehicle.
position.
6 positions are available (from 0 for an empty
(Depending on version)
When the function is activated or deactivated, a
vehicle to 5 for a heavily loaded vehicle).
Vehicle side marking by lighting the sidelamps
message is displayed.
on the traffic side only.
► Within one minute after switching off the
Automatic illumination of
Malfunction
ignition, operate the lighting control stalk
In the event of a malfunction of the rain/
lamps
upwards or downwards, depending on the side
sunshine sensor, the vehicle’s lamps
of the traffic.
With the lighting control stalk in the “AUTO”
come on and this warning lamp is displayed on
This is confirmed by an audible signal and the
position and if a low level of exterior brightness
the instrument panel, accompanied by an
lighting of the corresponding direction indicator
is detected by the rain/sunshine sensor, the
audible signal and/or the display of a message.
lamp on the instrument panel.
number plate lamps, sidelamps and dipped
Have it checked by a PEUGEOT dealer or a
► To switch off the parking lamps, return the
beam headlamps are switched on automatically,
qualified workshop.
lighting control stalk to the central position.
without any action on the part of the driver. They
may also come on if rain is detected, at the same
Do not cover the rain/sunshine sensor
time as automatic operation of the windscreen
located at the top centre of the
wipers.
windscreen behind the interior rear view
mirror; the associated functions would no
longer be controlled.
49
Lighting and visibility
In fog or snow, the rain/sunshine sensor
When the front courtesy lamp control is
Without AUTO wiping
DOOR
may detect sufficient light. For this
activated, the front courtesy lamp comes
reason, the lighting will not come on
on automatically when a door is opened.
automatically.
Depending on version, the front doors have sill
lighting. Each sill light automatically switches on
The inner surface of the windscreen may
when a front door is opened to facilitate entry
become misted up and affect the proper
into the vehicle at night.
operation of the rain/sunshine sensor.
You can activate/deactivate this function
In humid and cold weather, demist the
and adjust the welcome lighting duration
in the Vehicle settings touch screen menu.
With AUTO wiping
windscreen regularly.
Wiper control stalk
Guide-me-home and
Before operating the wipers in wintry
welcome lighting
conditions, clear any snow, ice or frost
from the windscreen and around the wiper
Guide-me-home lighting
arms and blades.
Depending on version, when the light is poor, the
Windscreen wipers
dipped beam headlamps come on automatically
Do not operate the wipers on a dry
To select the wiping speed: raise or lower the
when the ignition is switched off.
windscreen. In extremely hot or cold
control stalk to the desired position.
Guide-me-home lighting goes off automatically
weather, check that the wiper blades are not
Single wipe
after a period of time.
stuck to the windscreen before operating the
You can activate/deactivate this function
wipers.
Off.
and adjust the guide-me-home lighting
duration in the Vehicle settings touch screen
After using an automatic car wash, you
Intermittent wiping (proportional to the
menu.
may temporarily notice abnormal noises
speed of the vehicle).
and poorer wiping performance. You do not
or
Welcome lighting
need to replace the wiper blades.
Automatic and intermittent wiping
When unlocking the vehicle, this system
(proportional to the speed of the vehicle).
automatically switches on the dipped beam
Refer to the corresponding section.
headlamps and certain lights in the passenger
Normal wiping.
compartment.
50
Lighting and visibility
Fast wiping.
To avoid damaging the wiper blades, do
Never shake, rotate or bend the wiper arm
4
not operate the screenwash if the
and blade.
screenwash reservoir is empty.
If the ignition has been switched off with
Only operate the screenwash if there is no
the windscreen wipers active, you must
Removing/Refitting at the front
risk of the fluid freezing on the windscreen
operate the control stalk again to reactivate
and hindering visibility. During the winter
wiping when the ignition is switched on again
period, use "very cold climate" rated products.
(unless the ignition was off for less than
Never top up with water.
a minute).
Changing a wiper blade
Decreasing or increasing the wiping
frequency
To check that the wiper blades have not
become rough, gently slide your finger
along the blade.
To maintain the effectiveness of the wipers, it
is advisable to:
► Carry out these wiper blade replacement
- handle them with care.
operations from the driver's side.
- clean them regularly using soapy water.
► Starting with the wiper blade farthest from
- clean the windscreen regularly with a
► Rotate the ring to increase/decrease
you, hold each arm by the rigid section and raise
special detergent.
the wiping frequency (with "INT" or
it as far as possible.
- avoid using them to hold cardboard on the
"AUTO" wiping position).
windscreen.
Do not touch the wiper blades - risk of
- replace them at the first signs of wear.
irreparable deformation.
Windscreen wash
Do not release them while moving them. Risk
► Pull the wiper control stalk towards you and
For safety reasons and to avoid
of damaging the windscreen!
hold.
damaging the windscreen or the
A final wiping cycle is performed when
► Clean the windscreen using screenwash
windscreen wiper blades, always clean them
screenwashing ends.
fluid.
if foreign bodies are present (for example:
sand, dust, oil, bird droppings).
Do not apply "Rain X" type water-
Never use petrol, thinner or another similar
repellent products.
solvent to clean the wiper blades.
51
Lighting and visibility
► Unclip the worn wiper blade closest to you
Switching on
and remove it.
► Install the new wiper blade and clip it to the
arm.
► Repeat the procedure for the other wiper
blade.
► Starting with the wiper blade closest to you,
once again hold each arm by the rigid section,
then guide it carefully onto the windscreen.
► Put the wiper control stalk in the "AUTO"
position.
Automatic windscreen
A message is displayed to confirm that the
wipers
request has been taken into account.
In AUTO mode, the windscreen wipers work
Switching off
automatically and adapt to the intensity of the
► Put the wiper control stalk in the "OFF", "LO"
rain.
or "HI” position.
The rainfall detection function uses a rain/
sunshine sensor located at the top centre of the
Reactivate automatic wiping if the ignition
windscreen, behind the rear view mirror.
has been switched off for more than 1
minute.
Do not cover the rain/sunshine sensor.
When using an automatic car wash,
switch off the automatic wipers and the
Malfunction
ignition.
If a fault occurs with the automatic wipers, the
In winter, wait until the windscreen is
wipers operate in intermittent mode.
completely clear of ice before activating the
Have it checked by a PEUGEOT dealer or a
automatic wipers.
qualified workshop.
52
Safety
Installing electrical accessories:
in line with the Vehicle Electromagnetic
General safety
5
- The fitting of electrical equipment or
Compatibility Directive (2004/104/EC).
recommendations
accessories not approved by PEUGEOT may
cause excessive current consumption and
Declarations of conformity for radio
On and off-road driving
faults and failures with the electrical system
equipment
This commercial and all-terrain type
of your vehicle. Contact a PEUGEOT dealer
The relevant certificates are available on the
vehicle can be driven on roads and rough
for information on the range of approved
brand website:
terrain. The higher ground clearance and
accessories.
centre of gravity make this vehicle more
- As a safety measure, access to the
likely to tip over. Refer to the Driving
diagnostic socket, used for the vehicle's
Operating speed thresholds
recommendations.
electronic systems, is reserved strictly for
The speed threshold values, for the
PEUGEOT dealers or qualified workshops,
operation of certain systems, are given for
Do not remove the labels attached in
equipped with the special tools required (risk
information purposes only. The thresholds
different places on your vehicle. They
of malfunctions of the vehicle's electronic
may be different under actual conditions of
include safety warnings as well as
systems that could cause breakdowns or
use of the vehicle.
identification information for the vehicle.
serious accidents). The Manufacturer cannot
be held responsible if this advice is not
For all work on your vehicle, use a
followed.
Hazard warning lamps
qualified workshop that has the technical
- Any modification or adaptation not intended
information, skills and equipment required, all
or authorised by PEUGEOT or carried out
of which a PEUGEOT dealer is able to
without meeting the technical requirements
provide.
defined by the Manufacturer will result in the
suspension of the commercial warranty.
Depending on country regulations,
certain safety equipment may be
Installation of accessory radio
mandatory: high visibility safety vests,
communication transmitters
warning triangles, breathalysers, spare bulbs,
Before installing a radio communication
spare fuses, fire extinguisher, first aid kit, mud
transmitter with an external aerial, you must
► Pressing this red button causes all the
flaps at the rear of the vehicle, etc.
without fail contact a PEUGEOT dealer for
direction indicators to flash.
the specification of transmitters which can
They can work with the ignition switched off.
be fitted (frequency, maximum power, aerial
position, specific installation requirements),
53
Safety
Automatic operation of
Anti-lock braking system
Stop as soon as it is safe to do so and switch off
the ignition.
hazard warning lamps
(ABS)/Electronic brake force
Contact a PEUGEOT dealer or a qualified
When braking in an emergency, depending on
distribution (EBFD)
workshop.
the rate of deceleration, the hazard warning
These systems enhance the vehicle’s stability
When changing wheels (tyres and rims),
lamps come on automatically. They switch off
and handling during braking, and enable greater
ensure that these are approved for your
automatically when you next accelerate.
control while cornering, particularly on poor or
vehicle.
They can be switched off by pressing the button.
slippery road surfaces.
ABS prevents wheel locking in the event of
After an impact
Horn
emergency braking.
Have it checked by a PEUGEOT dealer
Electronic brake force distribution (EBFD)
or a qualified workshop.
manages overall braking pressure on each
individual wheel.
► When braking in an emergency, depress
Emergency braking
the pedal very firmly and maintain this
assistance (EBA)
pressure.
This system reduces the emergency stopping
Normal operation of the ABS may make
distance, by optimising the braking pressure.
itself felt by slight vibrations of the brake
It is triggered in relation to the speed at which
► Press the central part of the steering wheel.
pedal.
the brake pedal is depressed. The effect of this
is a reduction in the resistance of the pedal and
The fixed illumination of this warning lamp
Electronic stability control
an increase in braking efficiency.
signals that there is a fault with the ABS.
(ESC)
The vehicle retains conventional braking. Drive
Anti-slip regulation (ASR)
carefully at a moderate speed.
(Depending on version)
Have it checked by a PEUGEOT dealer or a
/ Dynamic stability control
The electronic stability control programme
includes the following systems:
qualified workshop.
(DSC)
This warning lamp, when lit together with
- Anti-lock braking system (ABS) and Electronic
Anti-slip regulation (or traction control) optimises
the STOP and ABS warning lamps,
brake force distribution (EBFD).
traction by using engine braking and by applying
accompanied by a message and an audible
- Emergency braking assistance (EBA).
the brakes on the driving wheels to avoid one
signal, indicates an EBFD malfunction.
- Anti-slip regulation (ASR).
or more wheels spinning. It also enhances the
You must stop the vehicle.
- Dynamic stability control (DSC).
vehicle's directional stability.
– Trailer stability assist (TSA).
54
Safety
In the event that a wheel has poor grip, anti-slip
It is in conditions of reduced grip (rain, snow,
5
regulation brakes the spinning wheel and returns
ice) that the risk of loss of grip increases. It
the engine torque to the wheel that has the best
is therefore important for your safety to keep
grip in order to prevent being bogged down.
these systems activated in all conditions, and
If there is a difference between the vehicle’s
particularly in difficult conditions.
trajectory and the path desired by the driver, the
Correct operation of these systems depends
dynamic stability control system automatically
on compliance with the manufacturer's
uses engine braking and the brakes on one or
recommendations relating to the wheels
more wheels to return the vehicle to the desired
(tyres and rims), braking and electronic
path, within the limits of the laws of physics.
► Press this button for approximately 5 seconds
components, as well as the assembly and
These systems are activated automatically every
to deactivate the functions (reactivated by a
repair procedures provided by PEUGEOT
time the vehicle is started.
single press).
dealers.
These systems are activated in the event
Deactivation is confirmed by the
In order to ensure that these systems remain
of a problem with grip or trajectory
illumination of this indicator lamp in the
effective in wintry conditions, the use of snow
(confirmed by this warning lamp flashing on the
instrument panel and the display of a message.
or all-season tyres is recommended. All four
instrument panel).
The ASR and DSC systems reactivate
wheels must be fitted with tyres approved for
automatically after the ignition has been
your vehicle.
Deactivation/Reactivation
All tyre specifications are listed on the
switched off.
In exceptional conditions (e.g. starting a vehicle
tyre/paint label. For more information
which is bogged down, stuck in snow, on soft
Malfunction
on Identification markings, refer to the
ground, etc.), it may be advisable to deactivate
In the event of a malfunction, this warning
corresponding section.
the ASR and DSC systems, so that the wheels
lamp lights up on the instrument panel,
can turn freely and regain grip.
accompanied by the display of a message and
Trailer stability assist (TSA)
Reactivate the systems as soon as the level of
an audible signal.
grip permits.
When towing, this system reduces the risk of the
Have it checked by a PEUGEOT dealer or a
vehicle or trailer snaking.
qualified workshop.
ASR/DSC
Operation
These systems enhance safety during
The system is activated automatically when the
normal driving, but should not encourage
ignition is switched on.
the driver to take extra risks or drive at high
The system does not operate whenever the ASR
speed.
and DSC systems are deactivated.
55
Safety
The electronic stability control system (ESC)
conditions of operation (e.g. excessive load,
The system is no longer available and no
must not have any faults.
exceeded nose weight, worn or under-inflated
longer active if the speed of the vehicle is
The vehicle speed must be less than
tyres, faulty braking system) or driving at
above 22 mph (35 km/h).
approximately 53 mph (85 km/h).
excessive speed.
If the system detects that the trailer is
In certain cases, the system may not detect
Switching on
snaking, it applies the brakes to stabilise
trailer snaking, particularly with a light trailer.
the trailer and reduces engine power, if
When driving on slippery or poor surfaces, the
By default, the system is not selected.
necessary, to slow the vehicle (indicated by the
system may not be able to prevent sudden
The state of the function is not saved when the
flashing of this warning lamp on the instrument
trailer snaking.
ignition is switched off.
panel and the brake lamps coming on).
The driver can select the system when the
For information on weights and towed loads,
engine is running, when the vehicle is stationary
refer to the Engine technical data and towed
or when moving at speeds up to approximately
Hill Assist Descent
loads section or your vehicle’s registration
31 mph (50 km/h).
Control
certificate.
To ensure safe driving with a Towing device,
Hill Assist Descent Control system for steep
refer to the corresponding section.
slopes and on road surfaces with poor grip
(e.g. gravel, mud).
Malfunction
This system reduces the risk of loss of control
If a fault occurs, this warning lamp lights
or slipping of the vehicle when descending in
up on the instrument panel, accompanied
forward gear.
by a message and an audible signal.
During a descent, the system assists the driver
To continue towing a trailer, reduce speed and
in maintaining a constant speed, depending on
► To select the system, press this button
drive carefully!
the gear engaged, while progressively releasing
until this green indicator lamp lights up on
Have it checked by a PEUGEOT dealer or a
the brakes.
the instrument panel.
qualified workshop.
For the system to activate, the gradient
The system becomes active at speeds between
The trailer stability control system
must be greater than 5%.
5 and 22 mph (8 and 35 km/h).
provides an extra safety feature under
The system can be used with the gearbox in
► When the vehicle begins its descent, the
normal driving conditions, when following the
neutral.
driver can release the accelerator and brake
recommendations for use of trailers and
Otherwise, engage a gear corresponding to
pedals; the system regulates the speed:
current legislation in force in your country. It
the speed to prevent the engine stalling.
- If the gearbox is in first or second gear,
must not encourage the driver to take extra
With an automatic gearbox, the system can
the speed decreases and the
risks, such as using a trailer in unsuitable
be used with the selector at N or D.
indicator lamp flashes rapidly.
56
Safety
- If the gearbox is in neutral or if the clutch
Malfunction
This system reduces the pressure of the seat
5
pedal is depressed, the speed decreases and
belt on the chest of the occupant, thus improving
In the event of a malfunction, this warning
the indicator lamp flashes slowly; in this case,
their protection.
lamp comes on in green on the
the maintained descent speed is lower.
instrument panel, accompanied by the display of
In the event of an impact
Activation of the system may cause noise
a message.
Depending on the nature and
in the transmission. This is perfectly
Have it checked by a PEUGEOT dealer or a
seriousness of the impacts, the pyrotechnic
normal and has no consequence on the
qualified workshop.
device may trigger before and independently
behaviour of the vehicle.
of airbag deployment. Deployment of the
pretensioners is accompanied by a slight
Seat belts
On a downward slope, with the vehicle
discharge of harmless smoke and a noise,
stationary, if the driver releases the accelerator
Inertia reel
due to the activation of the pyrotechnic
and brake pedals, the system will release the
The seat belts are equipped with an inertia
cartridge incorporated in the system.
brakes to set the vehicle gradually in motion.
reel which allows the strap length to adjust
In all cases, the airbag warning lamp comes
The brake lamps light up automatically when the
automatically to the shape of the user. The seat
on.
system is regulating.
belt returns to its storage automatically when it
Following an impact, have the seat belt
If the speed exceeds 22 mph (35 km/h),
is not used.
system checked, and if necessary replaced,
regulation is paused automatically, but the
The inertia reels are fitted with a device which
by a PEUGEOT dealer or a qualified
indicator lamp in the instrument panel remains
automatically locks the strap in the event of a
workshop.
on.
collision, emergency braking or if the vehicle rolls
Regulation resumes automatically when the
over. It can be released by pulling the strap firmly
speed falls below 22 mph (35 km/h) again, if the
and then releasing it so that it reels in slightly.
Front seat belts
slope and pedal release conditions are met.
Pyrotechnic pretensioning
The front seat belts are fitted with a pyrotechnic
Depress the accelerator or brake pedal again to
This system improves safety in the event of a
pretensioning system, depending on version,
pause the cruise control.
frontal or side impact.
and a force limiting system.
Depending on the severity of the impact, the
Switching off
pyrotechnic pretensioning system instantly
► Press the button until the indicator lamp on
tightens the seat belts against the body of the
the instrument panel goes off.
occupants.
At a speed of approximately 50 mph (80 km/h),
The pyrotechnic pretensioning seat belts are
the system is automatically deactivated and the
enabled when the ignition is on.
indicator lamp on the instrument panel goes off.
Force limiting system
57
Safety
Height adjustment
Depending on version, the centre seat is fitted
Fastening
with a lap belt without inertia reel, a three-point
► Pull the strap, then insert the tongue into the
seat belt with inertia reel or has no seat belt.
buckle.
Do not interchange the driver's seat belt or
► With a 2-seat front bench seat, pull the strap
buckle with the centre seat belt or buckle
of the lap belt to eliminate play (depending on
(depending on version).
version).
► Check that the seat belt is fastened correctly
Rear seat belts
by pulling on the strap.
Unfastening
► Press the red button on the buckle.
► Guide the seat belt as it is reeled in.
► With a 2-seat front bench seat, fasten the lap
belt so that it does not interfere with the driver
(depending on version).
► To adjust the height of the anchorage point,
Seat belt not fastened/
squeeze control A and slide it to the notch
desired.
unfastened alerts
2-seat front bench seat
Each of the rear seats has a three-point seat belt
A. Front seat belt(s) not fastened/unfastened
with inertia reel.
warning lamp.
The outer seats are fitted, depending on the
B. Rear seat belt(s) not fastened/unfastened
version, with a pyrotechnic pretensioning and
warning lamps (depending on version).
If the vehicle is fitted with a front bench seat,
force limiting system.
ensure that each seat belt is used with its correct
At speeds above approximately 6 mph (10 km/h),
buckle.
the warning lamp(s) flash(es) for about 1
minute, accompanied by an audible signal. After
58
Safety
1 minute, the warning lamp(s) remain(s) on
- be tightened as close to the body as
Airbags
5
until the driver or passenger(s) (depending on
possible.
version) fasten(s) their seat belt(s).
- be pulled in front of you with a smooth
General information
movement, checking that it is not twisted.
Advice
- must only be used to secure one person.
The airbags have been designed to optimise the
- not show signs of tearing or fraying.
safety of the occupants in the event of a violent
The driver must ensure that passengers
collision; they supplement the action of the seat
- not be changed or modified, in order to
use the seat belts correctly and that they
belts equipped with a force limiting system.
avoid affecting its performance.
are all fastened before setting off.
Electronic detectors record and analyse the
Wherever seated in the vehicle, you must
front and side impacts sustained in the impact
Recommendations for children
always fasten the seat belt, even for short
detection zones:
Use a suitable child seat if the passenger
journeys.
- In the event of violent impact, the airbags
is less than 12 years old or shorter than 1.5
Do not invert the seat belt buckles, as they
deploy instantly and help better protect the
metres.
will not fulfil their role properly.
occupants of the vehicle; immediately after the
Never use the same seat belt to secure more
To ensure the proper functioning of the belt
impact, the airbags deflate rapidly in order not
than one child.
buckles, make sure that there are no foreign
to hinder the visibility or the possible exit of the
Never carry a child on your lap.
bodies present (e.g. a coin) before fastening.
occupants.
For more information on Child seats, refer to
Before and after use, ensure that the seat belt
- In the event of a slight impact, a rear impact
the corresponding section.
is reeled in correctly.
and under certain rollover conditions, the airbags
After folding or moving a seat or rear bench
may not deploy; only the seat belt helps to
seat, ensure that the seat belt is positioned
Maintenance
protect you in these situations.
and reeled in correctly.
In accordance with current safety
The seriousness of the impact depends on the
regulations, for all work on your vehicle's
nature of the obstacle and the speed of the
seat belts, contact a qualified workshop with
Installation
vehicle at the moment of collision.
the skills and equipment needed, which a
The lower part of the strap must be
PEUGEOT dealer is able to provide.
The airbags do not operate when the
positioned as low as possible over the pelvis.
Have the seat belts checked regularly by a
ignition is switched off.
The upper part must be positioned in the
PEUGEOT dealer or a qualified workshop,
This equipment will only deploy once. If a
hollow of the shoulder.
particularly if the straps show signs of
second impact occurs (during the same or a
At the front, adjusting the position of the
damage.
subsequent accident), the airbag will not be
seat belt may require the seat height to be
Clean the seat belt straps with soapy water or
deployed again.
adjusted.
a textile cleaning product, sold by PEUGEOT
In order to be effective, a seat belt must:
dealers.
59
Safety
Impact detection zones
Front airbags
Lateral airbags
In the event of a serious side impact, this system
protects the driver and front passenger to
mitigate the risk of injury to the chest, between
A. Front impact zone
the hip and the shoulder.
B. Side impact zone
Each lateral airbag is fitted in the seat backrest
frame, on the door side.
When one or more airbags are deployed,
the detonation of the pyrotechnic charge
Deployment
incorporated in the system makes a noise and
This system protects the driver and front
The lateral airbags are deployed on one side in
releases a small quantity of smoke.
passenger in the event of a serious front impact,
the event of a serious side impact applied to all
This smoke is not harmful, but sensitive
limiting the risk of head and chest injury.
or part of the side impact zone B.
individuals may experience irritation.
The driver's airbag is fitted in the centre of the
The lateral airbag inflates between the chest of
The detonation noise associated with the
steering wheel; the front passenger airbag is
the vehicle's occupant and the corresponding
deployment of one or more airbags may result
fitted in the dashboard above the glove box.
door panel.
in a slight loss of hearing for a short time.
Deployment
Curtain airbags
They deploy, except the front passenger airbag
if it is deactivated*, in the event of a serious front
impact to all or part of the front impact zone A.
The front airbag inflates between the thorax and
System contributing towards greater protection
head of the front occupant of the vehicle and the
for the driver and passengers (with the exception
steering wheel, driver's side, and the dashboard,
of the rear centre passenger) in the event of a
passenger's side, to cushion their forward
serious side impact in order to limit the risk of
movement.
injury to the side of the head.
Each curtain airbag is built into the pillars and
the upper passenger compartment area.
* For more information on Deactivating the front passenger airbag, refer to the corresponding section.
60
Safety
Deployment
the airbags, as this could cause injuries when
Lateral airbags
5
It deploys simultaneously with the corresponding
they are deployed.
Use only approved seat covers
lateral airbag in the event of a serious side
Never modify the original definition of the
compatible with the deployment of these
impact applied to all or part of the side impact
vehicle, particularly in the area directly around
airbags. For information on the range of seat
zone B.
the airbags.
covers suitable for your vehicle, contact a
The curtain airbag inflates between the front
Even if all of the precautions mentioned are
PEUGEOT dealer.
and rear occupants of the vehicle and the
observed, a risk of injury or of minor burns to
Do not fix or attach anything to the seat
corresponding windows.
the head, chest or arms cannot be ruled out
backrests (e.g. clothing) as this could cause
when an airbag is deployed. The bag inflates
injuries to the chest or arm when the airbag is
Malfunction
almost instantly (within a few milliseconds)
deployed.
then deflates within the same time,
Do not sit with the upper part of the body any
In the event of a malfunction, this warning
discharging the hot gas via openings provided
nearer to the door than necessary.
lamp lights up on the instrument panel.
for this purpose.
The vehicle's front door panels include side
Contact a PEUGEOT dealer or a qualified
After an accident or if the vehicle has been
impact sensors.
workshop to have the system checked.
stolen, have the airbag systems checked.
A damaged door or any unauthorised or
The airbags may not be deployed in the event of
All work must be carried out only by a
incorrectly executed work (modification or
a serious impact.
PEUGEOT dealer or a qualified workshop
repair) on the front doors or their interior trim
In the event of a minor impact or bump at
could compromise the operation of these
the side of the vehicle or if the vehicle
sensors - risk of malfunction of the lateral
Front airbags
rolls over, the airbags may not be deployed.
airbags!
Do not drive holding the steering wheel
In the event of a rear or front collision, none of
All work must be carried out only by a
by its spokes or resting your hands on the
the lateral airbags are deployed.
PEUGEOT dealer or a qualified workshop
centre part of the wheel.
Passengers must not place their feet on the
Advice
dashboard.
Curtain airbags
Do not smoke as deployment of the airbags
Do not fix or attach anything to the roof,
For the airbags to be fully effective,
can cause burns or the risk of injury from a
as this could cause head injuries when the
observe the safety recommendations
cigarette or pipe.
curtain airbag is deployed.
below.
Never remove or pierce the steering wheel or
Do not remove the grab handles installed on
Adopt a normal and upright sitting position.
hit it violently.
the roof, as these help to secure the curtain
Fasten your seat belt and position it correctly.
Do not fix or attach anything to the steering
airbags.
Do not place anything between the occupants
wheel or dashboard, as this could cause
and the airbags (e.g. child, animal, object), do
injuries when the airbags are deployed.
not fix or attach anything near or in the path of
61
Safety
Recommended child seats and
Installing a booster seat
Child seats
installation possibilities
The chest part of the seat belt must be
The regulations on carrying children are
For the recommended child seats and
positioned on the child's shoulder without
specific to each country. Refer to the
installation possibilities in the vehicle, refer to
touching the neck.
legislation in force in your country.
the seat manufacturer's instructions or contact
Ensure that the lap part of the seat belt
a PEUGEOT dealer.
passes correctly over the child's thighs.
For maximum safety, please observe the
Use a booster seat with a backrest, equipped
following recommendations:
with a belt guide at shoulder level.
An incorrectly installed child seat in a
- All children under the age of 12 or less
vehicle compromises the child's safety in
than 1.5 metres tall must travel in approved
the event of an accident.
Additional protections
child seats suited to their weight, on seats
Ensure that there is no seat belt or seat belt
To prevent accidental opening of the
fitted with a seat belt or ISOFIX mountings.
buckle under the child seat, as this could
doors and rear windows, use the "Child lock".
- Statistically, the safest seats in your
destabilise it.
Take care not to open the rear windows by
vehicle for carrying children are the rear
Remember to fasten the seat belts or the
more than one third.
seats.
child seat harness keeping the slack relative
To protect young children from the sun's rays,
- Children weighing less than 9 kg must
to the child's body to a minimum, even for
fit side blinds on the rear windows.
travel in the "rearward facing" position,
short journeys.
As a safety measure, do not leave:
whether in the front or rear of the vehicle.
When installing a child seat using the seat
- A child alone and unsupervised inside a
It is recommended that children travel
belt, ensure that the seat belt is tightened
vehicle.
on the rear seats of the vehicle:
correctly on the child seat and that it secures
- A child or an animal in a vehicle which is
- "rearward facing" up to the age of 3.
the child seat firmly on the vehicle seat. If
exposed to the sun, with the windows closed.
- "forward facing" over the age of 3.
the passenger seat is adjustable, move it
- The keys within reach of children inside the
forwards if necessary.
vehicle.
Remove the head restraint before
Make sure that the seat belt is correctly
installing a child seat with a backrest on a
positioned and tightened.
Child seat at the rear
passenger seat.
For child seats with a support leg, ensure that
Ensure that the head restraint is stored or
the support leg is in firm and steady contact
Forward-facing or rearward-facing
attached securely to prevent it from being
with the floor.
thrown around the vehicle in the event of
sharp braking. Refit the head restraint once
the child seat has been removed.
62
Safety
"Rearward facing"
5
► Move the vehicle's front seat forward and
straighten the backrest so that the legs of the
You must comply with the following instruction,
child in the forward-facing or rearward-facing
as reminded by the warning label on both sides
child seat itself do not touch the vehicle's front
of the passenger sun visor:
seat.
NEVER use a rearward facing child restraint
► Check that the backrest of the forward-facing
The front passenger airbag must be
on a seat protected by an ACTIVE AIRBAG in
child seat is as close as possible to the backrest
deactivated before installing a rearward
front of it, DEATH or SERIOUS INJURY to the
of the vehicle's rear seat, and ideally in contact
facing child seat. Otherwise, the child risks
CHILD can occur.
with it.
being seriously injured or killed if the
airbag is deployed.
Centre rear seat
Deactivating the front passenger
A child seat with a support leg must never be
airbag
installed on the centre rear passenger seat.
"Forward facing"
Child seat at the front
Passenger airbag OFF
To ensure the safety of the child, the front
passenger airbag MUST be deactivated
when a "rearward facing" child seat is
► Adjust the front passenger seat to the
You must leave the front passenger
installed on the front passenger seat.
highest and fully back longitudinal position,
airbag active.
Otherwise, the child risks being seriously
with the backrest straightened.
injured or killed in the event of deployment of
Warning label - Front passenger airbag
the airbag.
63
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст