Peugeot 108 (2016 year). Instruction — part 5

63

3

Ease of use and comfort

108_en_Chap03_ergonomie-confort_ed01-2016

Front fittings

1. Sun visor.
2. glove box.
3. Radio, touch screen or storage.
4. 12 volt accessory socket (120 W maxi).

Do not exceed the power rating to avoid
damaging your accessory.

5. uSB port.
6. Auxiliary socket.
7. Storage or cup holder.
8. Cup holder.
9. Door pockets.

Storage for a bottle of water.

64

Ease of use and comfort

108_en_Chap03_ergonomie-confort_ed01-2016

glove box

Sun visor

the sun visors are fitted with a vanity mirror,
with a concealing flap and a map holder (or
ticket holder).

It can be used to hold the vehicle's handbook
pack...
F to open the glove box, raise the handle.
It houses the front passenger airbag
deactivation switch A and the reinitialisation
button (B) for the tyre under-inflation detection
system (depending on equipment).
On one side there is a location C intended to
hold a water bottle (1 litre maximum).

F to connect a 12 V accessory (maximum

power: 120 Watts), lift the cover and
connect a suitable adaptor.

12 V accessory socket

Do not exceed the maximum power
rating of the socket (risk of damage to
your device).

65

3

Ease of use and comfort

108_en_Chap03_ergonomie-confort_ed01-2016

It permits the connection of a portable device
to listen to your music files via the vehicle's
speakers.
the management of the files is done using your
portable device.

It permits the connection of a portable device,
such as a digital audio player of the iPod

®

type

or uSB memory stick.
It reads the audio files, which are sent to your
audio system to be heard via the vehicle's
speakers.
You can manage these files using the steering
mounted controls or those on the audio system
control panel.

Auxiliary socket

uSB port

For more information on the use of
this equipment, refer to the "Audio
equipment and telematics" section.

For more information on the use of this
equipment, see the "Audio equipment
and telematics" section.

Connected to the uSB port, the
portable device charges automatically
while in use.

the uSB port and auxiliary Jack socket
also allow connection of a smartphone.
-

either by MirrorLink

tM

connection

using the uSB port only,

-

or by iPhone

®

connection using

both the uSB port and the auxiliary
Jack socket.

these connections allow you to use
certain applications on the telephone in
the touch screen.

66

Ease of use and comfort

108_en_Chap03_ergonomie-confort_ed01-2016

to remove the mat on the driver's side:
F move the seat as far back as possible,
F unclip the fixings,
F remove the mat.

Mats

When fitting the mat for the first time, on the
driver's side use only the fixings provided in the
wallet attached.
the other mats are simply placed on the
carpet.

to avoid any risk of jamming of the
pedals:
-

only use mats which are suited to
the fixings already present in the
vehicle; these fixings must be used,

-

never fit one mat on top of another.

the use of mats not approved by
PeugeOt may interfere with access
to the pedals and hinder the operation
of the speed limiter or etg electronic
gearbox.

to refit the mat on the driver's side:
F position the mat correctly,
F refit the fixings by pressing,
F check that the mat is secured correctly.

Fitting

Removal

Refitting

67

3

Ease of use and comfort

108_en_Chap03_ergonomie-confort_ed01-2016

Rear parcel shelf

to facilitate loading of the boot, the rear parcel
shelf is fitted to the tailgate.

When closing the tailgate, check that nothing
could interfere with the return to position of the
shelf.

Do not place heavy loads on the shelf,
as they may cause the shelf to unclip.

to remove the shelf:
F open the tailgate,
F unclip the two cords,
F pull firmly on the shelf to disengage it from

its hinges on the tailgate inner trim.

You can then stow the shelf behind the front
seats.

to refit the shelf:
F open the tailgate,
F position the underside of the shelf facing

you,

F clip the shelf into the two hinges,
F pass the two cords through the guides

either side of the struts,

F clip the two cords in place.

68

Ease of use and comfort

108_en_Chap03_ergonomie-confort_ed01-2016

Boot fittings

1. Hooks.
2. temporary use spare wheel and tools.
or

Storage box.

the wheel or storage box must be put
in place under the carpet before loading
the boot.

69

3

Ease of use and comfort

108_en_Chap03_ergonomie-confort_ed01-2016

Storage box

F Remove the boot carpet for access to the

storage box.

Depending on the configuration, it is laid out for
storing:
-

a towing eye,

-

a temporary puncture repair kit,

- ...

For versions with storage box: it must
be in place before loading the boot.

the hooks can be used to secure shopping
bags.

Hooks

Maximum authorised load on the
hooks: 2 kg.

70

Driving

108_en_Chap04_conduite_ed01-2016

A few driving recommendations

Observe the driving regulations at all times and
remain vigilant whatever the traffic conditions.
Pay close attention to the traffic and keep your
hands on the wheel so that you are ready to
react at any time to any eventuality.
On a long journey, a break every two hours is
strongly recommended.
In difficult weather, drive smoothly, anticipate
the need to brake and increase the distance
from other vehicles.

Never drive with the parking brake
applied - Risk of overheating and
damage to the braking system!
Do not park or run the engine when
stationary in areas where inflammable
substances and materials (dry grass,
dead leaves...) might come into contact
with the hot exhaust system - Risk of
fire!

Never leave a vehicle unsupervised
with the engine running. If you have
to leave your vehicle with the engine
running, apply the parking brake
and put the gearbox into neutral or
position N, depending on the type of
gearbox.

Driving on flooded
roads

We strongly advise against driving on flooded
roads, as this could cause serious damage
to the engine or gearbox, as well as to the
electrical systems of your vehicle.

Important!

If you are obliged to drive through water:

-

check that the depth of water does not
exceed 15 cm, taking account of waves
that might be generated by other users,

-

deactivate the Stop & Start system,

-

drive as slowly as possible without
stalling. In all cases, do not exceed 6 mph
(10 km/h),

-

do not stop and do not switch off the
engine.

On leaving the flooded road, as soon as
circumstances allow, make several light brake
applications to dry the brake discs and pads.
If in doubt on the state of your vehicle, contact
a PeugeOt dealer or a qualified workshop.

71

4

Driving

108_en_Chap04_conduite_ed01-2016

Starting - switching off the engine with the key

1. "LoCK" position.

the steering column is unlocked.

2. "ACC" position.

the ancillaries (audio system,
12V socket...) can be used.

3. "oN" position

Ignition on.

4. "StARt" position.

engine starting.

Ignition switch

For vehicle fitted with a manual gearbox:
F Insert the key in the ignition switch.
F turn the key to position 2.
F unlock the steering column, by turning the

wheel slightly.

F Fully depress the clutch pedal.
F Put the gear lever into neutral.
F Operate the starter by turning the key to

position 4 (StARt).

F Once the engine is running, release

the key.

the key returns automatically to position 3
(oN).

Starting using the key

For vehicles fitted with an etg gearbox:
F Insert the key in the ignition switch.
F turn the key to position 2.
F unlock the steering column, by turning the

wheel slightly.

F Press and hold the brake pedal.
F Put the gear selector into position N.
F Operate the starter by turning the key to

position 4 (StARt).

F Once the engine is running, release

the key.

the key returns automatically to position 3
(oN).

If you use the ancillaries for a prolonged
period (key in position 2 or 3), you risk
discharging the battery. Starting your
vehicle will then no longer be possible.
Be aware.

Never leave the engine running in
an enclosed area without adequate
ventilation: internal combustion
engines emit toxic exhaust gases,
such as carbon monoxide. Danger of
intoxication and death. In very severe
winter conditions (temperatures
below -23°C), it is necessary to allow
the engine to run for 4 minutes before
setting off, in order to ensure the
correct operation and durability of
the mechanical components of your
vehicle, the engine and gearbox.

72

Driving

108_en_Chap04_conduite_ed01-2016

If you use the ancillaries for a prolonged
period, the vehicle will automatically
switch to "oFF" mode after about
20 minutes.
Be aware in order to avoid discharging
the battery.

Starting - switching off the engine
with the Keyless entry and Starting
system

Changing the mode of the
vehicle

With the electronic key inside the
vehicle; each press on the "StARt/
StoP" button, with no action on the
pedals, changes the vehicle's mode:

F First press ("ACC" mode).

the ancillaries (radio, 12V socket...) can be
used.

F Second press ("oN" mode).

Ignition on.

F third press ("oFF" mode).

Avoid attaching heavy objects to the
key, which would weigh down on its
blade in the ignition switch and could
cause a malfunction.

F Immobilise the vehicle.

Switching off

F With a manual gearbox: put the gear lever

into neutral.

F With an etg gearbox: place the selector at

position N.

F turn the key towards you to position 2 (ACC).
F Press in and turn the key to position 1 (LoCK).
F Remove the key from the ignition switch.
F turn the steering until the steering column

locks.

73

4

Driving

108_en_Chap04_conduite_ed01-2016

Starting using the
electronic key

With the first press on the "StARt/
StoP" button, this indicator lamp
flashes slowly in the instrument panel.

Depending on the ambient temperature,
each attempt at starting can take up to
around 30 seconds. During this period,
do not press the "StARt/StoP" button
again, or release the clutch pedal or
brake pedal (depending on the type of
gearbox).
After this period, if the engine has not
started, press the "StARt/StoP"
button again for another attempt at
starting.

If one of the starting conditions is
not met, the "Keyless entry and
Starting" system indicator lamp flashes
in the instrument panel. In some
circumstances, it is necessary to
turn the steering wheel slightly while
pressing the "StARt/StoP" button to
assist unlocking of the steering.

For vehicles fitted with a manual gearbox:
F With the electronic key inside the vehicle,

put the gear lever into neutral and fully
depress the clutch pedal.

the presence of the electronic key in
the vehicle is essential for switching
on the ignition and starting only. Once
the engine has started, make sure that
the electronic key remains with the
vehicle until the end of the journey:
otherwise you would not be able to lock
the vehicle.

F Press and release the "StARt/

StoP" button.

this indicator lamp comes on in the
instrument panel.

For vehicles fitted with an etg gearbox:
F With the electronic key inside the vehicle,

put the gear selector at N and press the
brake pedal.

this indicator lamp comes on in the
instrument panel.

F Press and release the "StARt/

StoP" button.

74

Driving

108_en_Chap04_conduite_ed01-2016

there is an audible signal when the driver's door
is opened and the vehicle is in "ACC" mode.

If the vehicle is not immobilised, the
engine will not stop.

Switching off using the
electronic key

F Immobilise the vehicle.
F With a manual gearbox: put the gear lever

into neutral.

F With an etg gearbox: place the gear

selector at N.

F With the electronic key inside

the vehicle, press the "StARt/
StoP" button.

the engine stops.
the steering locks when a door is opened or on
locking the vehicle.

F Press the "StARt/StoP" button

again to change to "oFF" mode.

emergency starting

When the electronic key is in the
recognition zone and your vehicle
does not start after pressing the
"StARt/StoP" button, this warning
lamp flashes in the instrument panel.

F With a manual gearbox: put the gear lever

into neutral.

F With an etg gearbox: place the selector

lever at N.

F Put the corner of the electronic key, where

the indicator lamp is located, in contact
with the "StARt/StoP" button.

there is an audible signal when the
electronic key is recognised; the vehicle
changes to "oN" mode.

F With a manual gearbox: press the clutch

pedal fully down.

F With an etg gearbox: press the brake

pedal.

F Check that the "Keyless entry and

Starting" indicator lamp comes on in green
in the instrument panel.

F Press the "StARt/StoP" button.

the engine starts.

If the engine does not start, contact a
PeugeOt dealer or a qualified workshop.

75

4

Driving

108_en_Chap04_conduite_ed01-2016

emergency switch-off

In the event of an emergency only, the engine
can be switched of without conditions. to do
this, press for more than 2 seconds, or make
a minimum of 3 successive presses on the
"StARt/StoP" button.
In this case the steering column locks as soon
as the vehicle stops.

electronic key not
recognised

If the electronic key is no longer in the
recognition zone when driving or when you
(later) request switching off the engine, there is
an audible signal to warn you.

F Press for more than 2 seconds,

or make a minimum of
3 successive presses on the
"StARt/StoP" button if you
want to force switching off of the
engine (note that restarting
will not be possible without
the key).

electronic engine
immobiliser

this locks the engine management system as
soon as the ignition has been switched off and
therefore prevents starting of the vehicle by
anyone who does not have the key.
the ignition key has an electronic chip which
has a special code. When the ignition is
switched on, the code must be recognised for
starting to be possible.
In the event of a malfunction, your vehicle will
not start.
Contact a PeugeOt dealer or a qualified
workshop.

Do not make any modifications to the
electronic immobiliser system.

76

Driving

108_en_Chap04_conduite_ed01-2016

Manual parking brake

Applying

F Pull the parking brake lever up to

immobilise your vehicle.

When the vehicle is being driven, if
the parking brake is still on or has
not been fully released, this warning
lamp comes on accompanied by an
audible signal.

Releasing

F Pull the parking brake lever up gently,

press the release button then lower the
lever fully.

5-speed manual
gearbox

engaging reverse
gear

F Press the clutch pedal fully down.
F Push the gear lever fully to the right then

backwards.

Only engage reverse gear when the
vehicle is stationary with the engine at idle.

When parking on a slope, direct your
wheels against the kerb, apply the
parking brake, switch off the ignition
and engage a gear (vehicles fitted with
a manual gearbox).

77

4

Driving

108_en_Chap04_conduite_ed01-2016

gear selector

etg electronic gearbox

the five-speed etg electronic gearbox offers a choice between the ease of automated operation or the pleasure of manual gear changing.

R. Reverse: with your foot on the brake pedal,

move the gear selector to the right then
forward to select this position.

N. Neutral: with your foot on the brake pedal,

select this position to start the engine.

e. Automatic (easy) mode: move the gear

selector back to select this mode.

M. Manual mode with sequential gear

changing: move the gear selector back
then to the left to select this mode.

Press behind the "+" steering
mounted control paddle to change up.

Steering mounted control paddles

the position of the gear selector (R, N, e or M)
is displayed in the instrument panel.
In automatic (easy) mode, when you
temporarily take control of gear changing,
the gear engaged is also displayed in the
instrument panel.

Display in the instrument panel

Press behind the "-" steering
mounted control paddle to change
down.

the steering mounted control paddles
cannot be used to select neutral or to
engage or come out of reverse gear.

78

Driving

108_en_Chap04_conduite_ed01-2016

F With the parking brake applied, press the

brake pedal then select position N.

F Start the engine.

Moving off

if you do not press the brake pedal or
if the gear selector is not in position N,
engine starting is not possible.

Never leave a child unsupervised inside
the vehicle with the engine running.

F Select position e using the gear selector.
the gearbox then operates in auto-active
mode, without any intervention required by
the driver.
It continuously selects the most suitable gear
for:
-

optimised fuel consumption,

-

the driving style,

-

the profile of the road,

-

the load in the vehicle.

to obtain optimum acceleration, when
overtaking another vehicle for example, press
firmly on the accelerator pedal going beyond
the point of resistance.

Automatic (eASY) mode

It is possible to change mode at any time, by
moving the gear selector from position e to
position M and the other way round.

F With your foot on the brake pedal, select

position R, e or M.

F Release the parking brake.
F Progressively release the brake pedal.

Accelerate away.

the creep function may be temporarily
unavailable if the clutch temperature is
too high or the gradient too steep. An
audible signal gives a warning if the
clutch temperature is too high.

Never select neutral N when the vehicle
is moving.

this function makes manoeuvring the vehicle
at low speed easier (parking, traffic jams…).
After first placing the gear selector in
position e, M or R, the vehicle moves off as
soon as you take your foot off the brake
pedal, at low speed, with the engine at idle.

Creep function