Alfa Romeo Stelvio (2022 year). Manual in english — page 4
61
DISPLAY
INFORMATION ON THE DISPLAY
1
2
3
4
5
6
7
8
10
9
11
12
13
14
15
79
05036S0166EM
1. External lights (low beam/high beam) display 2. Transmission, front and side anti-collision system, and Cruise Control information
3. Speed Limiter display 4. Driving assistance systems (FCW, LDW or LKA, HAS, ACC) information display 5. Active Cruise Control
(ACC) or Cruise Control (CC) information display 6. Traffic Sign Recognition (TSR) or Speed Limiter information display 7. Traffic
Sign Recognition (TSR) information display 8. Time 9. External temperature 10. Main display area: car speed display, Trip Computer
information, etc ... 11. Driving mode display (Alfa DNA system) 12. Distance covered in km (or miles) display (milometer) 13. Fuel
consumption graphic bar 14. Warning indications display (e.g. danger of ice, open doors, ABS operation, etc.) 15. Range
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
62
DISPLAY DESCRIPTION
Gearbox information
Shows the following information related
to the transmission operation mode (M,
P, R, N, D).
In automatic driving mode (D), when
changing gear using the steering wheel
lever (where provided), or manual driving
(mode M, it also show the gear engaged
with a number.
In manual driving mode (M), it also shows
when to shift gear up or down.
Front, side anti-collision systems,
Cruise Control
Displays the operation the following
modes:
Forward Collision Warning (FCW)
Lane Departure Warning (LDW)
Lane Keeping Assist (LKA)
Cruise Control (CC) or Active Cruise
Control (ACC) (where provided)
For further information, see relevant
paragraphs.
Speed limit
Shows information regarding the Speed
Limiter function. For further information,
see relevant paragraph.
Reconfigurable main area
The following screens may appear:
Home
Trip A
Trip B (this can be
activated/deactivated on the Connect
system)
Performance
Alternative Performance
The screens can be selected, on rotation,
by pressing the button shown in fig. 80.
80
05036V0002EM
Depending on the chosen driving mode
(Dynamic, Normal, Advanced Efficiency),
which can be selected through the “Alfa
DNA™” system, the screens may be
graphically different.
The navigation instructions and call
information can be repeated on the
Connect system display and also in this
area of the display. These functions can
be set on the Connect system.
Home
The parameters shown on the display,
for the modes: Dynamic, Normal and
Advanced Efficiency are:
Time (1) fig. 81 .
External temperature (2)
Current speed (3) (shown only if
the repeat mode of the “Navigation”
and “Phone” functions have not been
previously activated)
Range (4)
1
3
2
4
81
05036S0167EM
In RACE mode (where provided) the
consumption indication index is not
active and a sports gearshift indicator is
displayed.
The sports gear change indicator is
represented by three yellow segments
fig. 82.
The two white notches which are shown
at the third segment blink to indicate the
need to shift gear.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
63
82
05036S0177EM
Trip A and B
For all driving modes (“Dynamic”,
“Normal” and “Advanced Efficiency”),
with the ignition device ON, the "Trip
computer" can be used to display the
values related to the car’s operating
state.
This function is characterised by two
separate records, called "Trip A" and
"Trip B" (the latter can be deactivated
by Connect system), where the car’s
"complete missions" (journeys) are
recorded in a reciprocally independent
manner.
"Trip A” and "Trip B” are used to display
the values relating to fig. 83:
Travel Distance
Average fuel consumption
Average Speed
Active trip
Fuel level gauge
83
05036S0122EM
To reset the values, press and hold down
the button on the right stalk fig. 84.
84
05036V0002EM
Performance
The displayed parameters vary
depending on the active mode. The
modes can be selected through the “Alfa
DNA™” system and are as follows:
Normal
85
05036S0168EM
The screen graphically reproduces
some parameters closely linked to the
efficiency of the driving style, with a view
to limiting consumption.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
64
1
2
3
86
05036S0169EM
On the screen the three central icons
indicate the effectiveness of the driving
style linked to the parameters of:
acceleration (1), deceleration (2) and gear
shift (3) with a view to reducing fuel
consumption.
The graphic bar below the icons shows
current consumption and the green line
represents the optimal area. The globe
lights up gradually according to lower
consumption.
Dynamic
87
05036S0170EM
The displayed parameters are related
to car stability, the graphs illustrate
the trend of the longitudinal/lateral
accelerations (G-meter information),
considering gravity acceleration as a
reference unit.
Lateral acceleration peaks are also
indicated.
Race
(where provided)
88
05036S0171EM
The displayed parameters are related
to car stability, the graphs illustrate
the trend of the longitudinal/lateral
accelerations (G-meter information),
considering gravity acceleration as a
reference unit.
Lateral and longitudinal acceleration
peaks are also indicated.
Alternative Performance
The displayed parameters vary
depending on the active mode. The
modes can be selected through the “Alfa
DNA™” system and are as follows:
Normal and Advanced Efficiency
The display fig. 89 graphically shows the
values of:
instantaneous consumption;
average fuel consumption (based on
"Trip A");
Below a certain speed value, when the
accelerator pedal is not pressed or in the
event of failure, dashes are displayed in
place of the consumption value ("– –. –").
89
05036S0173EM
Advanced Efficiency
-------------------------------------------------------------------------------------------------------------------------------------------------------------
65
90
05036S0174EM
Dynamic
The display fig. 90 graphically shows the
values of:
accelerator pedal position (expressed
in percentage);
brake pedal position (expressed in
percentage);
engine coolant temperature (H = hot C
= cold).
Race
(where provided)
The display fig. 91 graphically shows the
values of:
engine torque;
turbocharger pressure;
engine oil pressure (L = low pressure/H
= high pressure).
NOTE The engine torque and
turbocharger pressure values vary
according to the engine type.
91
05036S0175EM
Compass
Views the position indicating the cardinal
point.
Odometer
Displays the total kilometres (or miles)
travelled.
Fault indications
Area dedicated to displaying failures, the
following symbols could be displayed on
rotation:
Low criticality symbols (yellow amber).
High criticality symbols (red).
Car range
Displays the kilometres (or miles) left
before the fuel tank is empty.
External lights symbols
Displays the icon related to the active
mode among the following:
dipped beam headlights;
main beam headlights
auto low beam headlights;
auto main beam headlights.
PARAMETERS SET BY USER
A series of functions can be set using the
Connect system.
The basic settings only are described:
Units & Language
Clock and Date
Instrument panel
Proceed as follows to see the list
containing the items shown below:
in the main menu, that can be activated
by pressing button (1) fig. 92, select the
"Settings" function that can be used by
turning and pressing the Rotary Pad (2);
turn the Rotary Pad to select the
required item;
press the Rotary Pad to activate the
required item.
92
04026V0555EM
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
66
The following settings can be modified
when this mode is selected:
“
Units
” (by selecting this item you can
choose between the metric, imperial or
custom systems; this last option lets you
set the measure unit for each individual
size).
“
Language
” (by selecting this item
you can choose the system viewing
language).
“
Restore Settings
” (allows you to
delete the current menu settings and
restore the factory settings).
To access and adjust the various
settings, turn and press the Rotary Pad
to select and confirm the selection.
Clock and Date
The following settings can be modified
when this mode is selected:
“
Sync with GPS Time
”
(activates/deactivates the clock
synchronization through the GPS; if the
function is deactivated, the options Set
Time and Set Date are enabled).
“
Set Time
” (allows to manually set the
time).
"
Set Date
” (to set the date manually).
“
Time Format
” (allows to choose the
time format between a 12-hour and a 24-
hour clock).
“
Restore Clock and Date Settings
”
(allows you to delete the current menu
settings and restore the factory
settings).
To access and adjust the various
settings, turn and press the Rotary Pad
to select and confirm the selection.
Instrument panel
The following settings can be modified
when this mode is selected:
"
Warning Buzzer Volume
" (allows you
to set the volume of the warning buzzer
on seven levels).
"
Trip B
" (to activate/deactivate the
function).
"
Show Phone Info
" (allows you to
activate/deactivate repetition of the
phone function screens also on the
instrument panel display).
"
Show Audio Info
" (allows you to
activate/deactivate repetition of the
audio function screens (Radio and Media)
also on the instrument panel display).
“
Show Nav Info
” (allows you to
activate/deactivate repetition of the
navigator function screens also on the
instrument panel display).
"Digital speed on all screens"
: this
allows you to activate/deactivating of
digital speed on the instrument panel
display screens other than the main
screen).
"Consumption Bar"
: allows you to
activate/deactivate the consumption bar
on the display screens of the instrument
panel where it is available).
"Performance pages"
: allows you to
choose, for each driving mode, one of the
two alternative contents displayed in the
screen).
"Custom areas"
: allows you to select
which content to display in each of the
three customisable areas on the display
of the instrument panel: time, date,
external temperature, radio information,
compass);
“
Restore Settings
” (deletes the current
settings and restores the factory
settings).
To access and adjust the various
settings, turn and press the Rotary Pad
to select and confirm the selection.
Units & Language
-------------------------------------------------------------------------------------------------------------------------------------------------------------
67
WARNING LIGHTS AND MESSAGES
WARNING The warning light switches on together with a dedicated message and/or acoustic signal when applicable.These
indications are indicative and precautionary and as such must not be considered as exhaustive and/or alternative to the information
contained in the Owner Handbook, which you are advised to read carefully in all cases. In the event of a failure indication, always refer
to the contents of this chapter.
WARNING The failure indicators appearing on the display are divided into two categories: very serious and less serious failures.
Serious faults are indicated by a repeated and prolonged warning "cycle". Less serious faults are indicated by a warning "cycle" with
a shorter duration. You can stop the warning cycle in both cases by pressing the button located on the windscreen wiper lever. The
instrument panel warning light will stay on until the cause of the failure is eliminated.
WARNING LIGHTS ON INSTRUMENT PANEL
Possible detailed messages and/or acoustic signalling can be matched to a few warning lights and symbols.
Red warning lights
Warning light
What it means
What to do
INSUFFICIENT BRAKE FLUID / ELECTRIC PARKING
BRAKE ON
The warning light switches on when the ignition device
is brought to ON, but it should switch off after a few
seconds.
Low brake fluid level
The warning light turns on when the level of the brake
fluid in the reservoir falls below the minimum level,
possibly due to a leak in the circuit.
Go to an Alfa Romeo Dealership to have the system
checked as soon as possible.
Electric parking brake on
The warning light switches on when the electric parking
brake is engaged.
WARNING If the car is parked on a gradient of more than
30% and/or the brake temperature is greater than 662°F
(350°C), when the parking brake is engaged, the warning
light will flash to indicate a potentially unsafe condition.
Release the electric parking brake, then check that the
warning light has switched off.
If the warning light stays on, contact an Alfa Romeo
Dealership.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
68
Warning light
What it means
What to do
EBD FAILURE
The simultaneous switching on of the
(red) and
(amber) warning lights with the engine on indicates either
a failure of the EBD system or that the system is not
available. In this case, the rear wheels may suddenly lock
and the vehicle may swerve when braking sharply.
Drive very carefully to the nearest Alfa Romeo Dealership
to have the system inspected immediately.
AIR BAG FAILURE
The warning light switches on when the ignition device
is brought to ON, but it should switch off after a few
seconds.
If the warning light switches on constantly, this indicates
a failure in the airbag system.
33) 34)
FRONT SEAT BELTS NOT FASTENED
The warning light switches on constantly if the vehicle
is stationary and the driver side or passenger side seat
belt, with the passenger seated, is not fastened. The
warning light flashes and an acoustic warning will sound
if the car is in motion and the driver side or passenger
side seat belt, with the passenger seated, is not correctly
fastened.
Fasten or check correct fastening of the front occupants'
seat belts.
HOT ENGINE OIL
The warning light switches on in the case of engine oil
overheating.
11)
If the problem persists, contact an Alfa Romeo Dealership.
WARNING
33)
The failure of the
warning light is signalled by the switching on of the
icon on the instrument panel. In this case, the warning light may not
indicate any faults with the restraint systems. Before proceeding, contact an Alfa Romeo Dealership to have the system checked immediately.
34)
If the
warning light does not switch on when the ignition device is moved to ON or if it stays on while driving (together with the message on
the display), there might be a fault in the restraint systems; in this case, the air bags or pretensioners may not deploy in the event of an accident
-------------------------------------------------------------------------------------------------------------------------------------------------------------
69
or, in a lower number of cases, they could deploy erroneously. Before proceeding, contact an Alfa Romeo Dealership to have the system checked
immediately.
IMPORTANT
11)
If the symbol switches on while driving, stop the car and the engine immediately.
Amber warning lights
Warning light
What it means
What to do
ABS FAILURE
The warning light switches on when the ignition device
is brought to ON, but it should switch off after a few
seconds.
The warning light switches on to indicate an ABS fault.
In this case the braking system maintains its efficiency
unaltered but without the advantage of the ABS system.
Drive carefully and contact an Alfa Romeo Dealership as
soon as possible.
TPMS FAILURE
The warning light switches on when a failure is detected
in the TPMS. Should one or more wheels be fitted
without sensors, the display will show a warning message
until initial conditions are restored.
Do not continue driving with one or more flat tyres as
handling may be compromised. Stop the car, avoiding
sharp braking and steering. Immediately restore the
correct inflation pressure using the Tire Repair Kit (see
"Repairing a wheel" paragraph in the "In an emergency"
chapter) and contact the dedicated Alfa Romeo
Dealership as soon as possible.
Low tyre pressure
The warning light switches on to indicate that the tyre
pressure is lower than the recommended value and/or
that slow pressure loss is occurring. In these cases,
optimal tyre duration and fuel consumption may not be
guaranteed.
In any situation in which the message on the display is
"See manual", it is ESSENTIAL to refer to the contents
of the "Wheels and rims" paragraph in the "Technical
Specifications" chapter, strictly complying with the
indications that you find there.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
70
Warning light
What it means
What to do
ESC SYSTEM
When the ignition device is brought to ON, the warning
light switches on, but should switch off as soon as the
engine is started.
ESC system intervention
: Intervention by the system is
indicated by the flashing of the warning light: it indicates
that the car is in critical stability and grip conditions.
ECS system failure
: If the warning light does not switch
off, or if it stays on with the engine running, a failure was
found in the ESC system.
In these cases, contact an Alfa Romeo Dealership as soon
as possible.
Hill Start Assist system failure
: the switching on of the
warning light indicates a Hill Start Assist system failure.
PARTIAL/TOTAL DEACTIVATION OF ACTIVE SAFETY
SYSTEMS
When the ignition device is brought to ON, the warning
light switches on, but should switch off as soon as the
engine is started.
The warning light switches on to indicate that some
active safety systems have been partially or totally
deactivated.
For further details about the active safety systems see
the "Active safety systems" paragraph in the "Safety"
chapter. When the active safety systems are reactivated,
the warning light switches off.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
71
Warning light
What it means
What to do
EOBD/INJECTION SYSTEM FAILURE
In normal conditions, when the ignition device is brought
to ON, the warning light switches on, but it should switch
off as soon as the engine is started.
The operation of the warning light may be checked by
the traffic police using specific devices. Comply with
the laws and regulations of the country where you are
driving.
12)
Injection system failure
If the warning light remains on, or it switches on whilst
driving, the injection system is not working properly.
The warning light on fixed signals a malfunction in
the supply/ignition system which could cause high
exhaust emissions, a possible loss of performance, poor
driveability and high consumption.
The warning light switches off if the malfunction
disappears, but is still stored by the system.
Under these conditions, you can continue travelling at
moderate speed but without demanding excessive effort
from the engine or high speed. Prolonged use of the car
with the warning light on constantly may cause damage.
Contact an Alfa Romeo Dealership as soon as possible.
Catalytic converter damage
If the warning light flashes, it means that the catalytic
converter may be damaged.
Release the accelerator pedal to lower the speed of the
engine until the warning light stops flashing.
Continue the journey at moderate speed, trying to avoid
driving conditions that may cause further flashing and
contact an Alfa Romeo Dealership as soon as possible.
AdBlue® (UREA) INJECTION SYSTEM FAILURE (2.2 JTD
versions only)
The warning light appears, on some versions together
with a dedicated message on the instrument panel
display, if a fluid not conforming with nominal features
is introduced or if an average AdBlue® (UREA)
consumption of over 50% is detected.
Contact an Alfa Romeo Dealership as soon as possible.
If the problem is not solved, a dedicated message will
appear on the instrument panel display whenever a certain
threshold is reached until it will no longer be possible to
start the engine.
When there are approximately 124 miles (200 km) before
you will no longer able to restart the engine, on some
versions a dedicated message will appear fixed on the
instrument panel display accompanied by warning tone.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
72
Warning light
What it means
What to do
REAR FOG LIGHT
The warning light switches on when the rear fog light is
turned on.
FORWARD COLLISION WARNING (FCW) SYSTEM
(where provided)
This warning light informs the driver that the frontal
collision alarm function is not enabled.
FUEL RESERVE/LIMITED RANGE
The warning light (or the icon on the display) turns on
when there are about 1.8 UK gal (8 litres) of fuel left in
the tank, for Diesel versions, and about 2 UK gal (9 litres)
of fuel for petrol versions.
13)
IMPORTANT
12)
If, turning the ignition device to ON, the
warning light does not turn on or if it turns on steadily or flashing while driving (on some versions
together with the message on the display), contact an Alfa Romeo Dealership as soon as possible.
13)
If the warning light (or the icon on the display) flashes while driving, contact an Alfa Romeo Dealership.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
73
Green warning lights
Warning light
What it means
What to do
SIDE LIGHTS AND DIPPED BEAM HEADLIGHTS
The warning light switches on when the side lights or
dipped headlights are turned on.
"Follow me" function engaged
This function allows the headlights to remain on for 30,
60 or 90 seconds after the ignition device was placed in
STOP position.
FOG LIGHTS
The warning light comes on when the front fog lights are
turned on.
LEFT DIRECTION INDICATOR
The warning light switches on when the direction
indicator control stalk is moved upwards or, together
with the left direction indicator, when the hazard warning
light button is pressed.
RIGHT DIRECTION INDICATOR
The warning light switches on when the direction
indicator control stalk is moved upwards or, together
with the left direction indicator, when the hazard warning
light button is pressed.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
74
SYMBOLS ON THE DISPLAY
Red Symbols
Symbol
What it means
What to do
LOW ENGINE OIL PRESSURE
The symbol indicates that the engine oil pressure is low.
If it turns on temporarily or flashes (for about 5 seconds),
check the oil level by following the corresponding
procedure (see the description in the "Checking levels"
paragraph in the "Maintenance and care" chapter) and
top up to the correct level if necessary.
If the symbol turns on continuously, contact an Alfa
Romeo Dealership to have the system checked.
WARNING IF THE SYMBOL TURNS ON
CONTINUOUSLY: Do not use the car until the failure has
been solved. When the symbol turns on, it does not
indicate the amount of oil in the engine: the oil level can
be checked on the display upon entering the vehicle and
also by activating the "Oil level" function on the Connect
system.
14)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
75
Symbol
What it means
What to do
ENGINE COOLANT TEMPERATURE TOO HIGH
The symbol lights up when the engine has overheated.
In normal driving conditions
: stop the car, switch off the
engine and check that the coolant level in the reservoir is
not below the MIN mark. In this case, wait for the engine to
cool down, then slowly and carefully open the cap, top up
with coolant and check that the level is between the MIN
and MAX marks on the reservoir itself. Also check visually
for any fluid leaks. Contact an Alfa Romeo Dealership if
the symbol comes on when the engine is started again.
If the car is used under demanding conditions (e.g. in high-
performance driving):
slow down and, if the warning light
stays on, stop the car.
Wait for 2 or 3 minutes with the engine running and slightly
accelerated to further favour the coolant circulation. Then
stop the engine. Check that the coolant level is correct as
described above
IMPORTANT Over demanding routes, it is advisable to
keep the engine running and slightly accelerated for a few
minutes before turning it off.
POWER STEERING FAILURE
If the symbol remains on, you could not have steering
assistance and the effort required to operate the
steering wheel could be increased; steering is, however,
possible.
Contact an Alfa Romeo Dealership as soon as possible.
DOORS OPEN
The symbol switches on when one or more doors are not
completely shut. An acoustic signal is activated with the
doors open and the car moving.
Close the doors properly.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
KNOWING THE INSTRUMENT PANEL
76
Symbol
What it means
What to do
BONNET NOT PROPERLY SHUT
The symbol turns on when the bonnet is not properly
closed, along with the icon, an image of the vehicle with
an open bonnet appears on the display.
An acoustic warning is heard when the bonnet is open and
the car is moving.
Close the bonnet properly.
TAILGATE NOT PROPERLY SHUT
The symbol turns on when the tailgate is not properly
closed, along with the icon, an image of the vehicle with
an open tailgate appears on the display.
A buzzer is heard with open tailgate and car moving.
Close the tailgate properly.
AUTOMATIC TRANSMISSION FAILURE
The symbol switches on, together with an acoustic
warning, to indicate that the automatic transmission is
faulty.
Contact an Alfa Romeo Dealership as soon as possible.
15)
INSUFFICIENT ENGINE OIL LEVEL
The symbol switches on, along with the related message
on the display, to indicate low engine oil level. Top up the
oil as soon as possible in order to restore the correct
level in the sump (see "Engine compartment - Checking
the levels" paragraph in the "Maintenance and care"
chapter for information on the quantity to be top up).
You may carry out this operation on your own, using a
suitable type of oil, as prescribed by Alfa Romeo (see
the "Fluids and lubricants" paragraph in the "Technical
specifications" chapter for detailed information).
Quadrifoglio version
: the level must also be checked
using the dipstick below the boot (see chapter "Servicing
and care").
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст