Alfa Romeo Stelvio (2022 year). Manual in english — page 12
IN AN EMERGENCY
190
HAZARD WARNING LIGHTS
CONTROL
68)
Press hazard lights button fig. 221 to
switch the lights on/off.
When the hazard lights are on, the
warning lights
and
flash.
When you need to move away from
the vehicle to look for help, the hazard
warning lights will continue flashing
even if the ignition device is in the STOP
position.
221
08016V0001EM
WARNING The use of hazard warning
lights is governed by the highway code
of the country you are driving in: comply
with legal requirements.
Emergency braking
The hazard lights are switched on and
warning lights
and
appear on the
instrument panel in case of emergency
braking and according to the mode
selected by the “Alfa DNA™” selector.
When the "Alfa DNA™" selector is
in position "n" or "a", the activation
threshold of the hazard warning lights is
higher; on the other hand, in position "d"
the sensitivity of the activation is lower
than that in the "n" and "a" modes.
The lights switch off automatically when
emergency braking ceases. For further
details about the emergency braking, see
the "Active safety systems" paragraph in
the "Safety" chapter.
IMPORTANT
68)
A prolonged use of the hazard warning
lights may discharge the battery.
SOS CALL AND ASSIST CALL
(for versions/markets where provided)
The car is equipped with on-board
assistance functions designed to provide
support in the event of accident and/or
emergency (SOS) or malfunctions of the
vehicle (roadside assistance - ASSIST)
managed by means of Alfa Connect Box.
The SOS function is activated:
automatically in the event of a major
collision recorded by the device aboard
the vehicle;
manually, by pressing the SOS button
located on the ceiling light fig. 222
or by means of the appropriate menu
fig. 223 on the Connect system (for
versions/markets, where provided).
222
04136S0073EM
-------------------------------------------------------------------------------------------------------------------------------------------------------------
191
223
12126S2098EM
WARNING
If the SOS emergency
service is activated, the call will be
automatically routed to a private
Call Centre. We hereby specify that,
whenever the SOS call is referred to the
text, the SOS call is to be considered
managed by private service providers.
This SOS call service is not the e-call
service.
.
The SOS service is valid for 5 years from
delivery of the vehicle; in any case, it is
advisable to consult the Connectivity
section of the official Alfa Romeo
website for updates on the terms of
service.
The ASSIST function is activated:
automatically (for versions/markets,
where provided) following malfunctions
of the braking system, fuel system,
engine, etc.
manually by selecting the appropriate
menu fig. 224 on the Connect system (for
versions/markets where provided).
224
12126S2099EM
The SOS and ASSIST functions are
active with:
ignition device is at ON;
ignition device in STOP position and
Connect system display on.
After the SOS and ASSIST functions
(for versions/markets, where provided)
have been activated automatically or
manually, pressing the corresponding
button will send the position data to the
operational centre and make a voice call
to an operator.
NOTE If the SOS or Assist functions do
not work, the fault in the system will be
indicated on the display. Go as soon as
possible to an authorised workshop to
have the function repaired.
NOTE The correct operation of the SOS
and ASSIST services will be guaranteed
only by a good network coverage.
WARNING The SOS Call and ASSIST Call
functions may not be available for the
first minute after the vehicle is started.
Privacy
: GPS location is always
active, for both SOS and Assist calls.
Deactivating it via the "Settings" menu
of the Connect system will make some
of the other services unavailable (see
the "Settings" chapter of the Connect
system for more details).
WARNING The
icon is shown at the
bottom left of the Connect system
display when the geolocation function
is active (ON). When geolocation is on,
the vehicle position is tracked to enable
the functions that require it. When
geolocation is off, the vehicle position is
only tracked by the navigation, safety,
insurance and driver assistance systems
(where provided). See the Connect
system "Settings" chapter to deactivate
the function.
MANUAL SOS CALL
In the event of need, hold the SOS
button on the front ceiling light fig. 222
pressed for 2 seconds or press the
button fig. 223 on the Connect display
(for versions/markets where provided).
-------------------------------------------------------------------------------------------------------------------------------------------------------------
IN AN EMERGENCY
192
The SOS button located on the ceiling
light will light up after connecting to an
SOS operator and will turn off when the
connection is ended.
NOTE If the SOS call button is pressed
by mistake, it is possible to press it
again within 10 seconds to cancel the
operation or press the cancel button on
the Connect system display.
Once the connection has been
established, the following data will
be automatically transmitted to the
Operations Centre, as authorised by the
customer:
indication that the occupant has made
an SOS call;
the brand of the vehicle;
the most recent known GPS
coordinates of the vehicle.
If you are able to speak to the operator,
do so through the car audio to provide
additional information about the request
for help.
If the system is unable to establish the
voice call, or the line disconnects due to
insufficient coverage, the SOS service
will try to call the operational centre
again for 5 minutes.
If the operational centre needs to
contact the car again, the system can
receive an incoming call, which will be
accepted automatically.
WARNING
Once the service has expired,
you will not be put in contact with an
operational centre and the system
will alert you that the service is not
available
.
WARNING Any malfunctions detected by
the SOS calling system will be notified:
during the start-up phase;
when the malfunction is detected;
by displaying a respective message on
the Connect system display. Contact
an Alfa Romeo Dealership as soon as
possible.
WARNING In the event of danger
(fire, visible smoke or hazardous road
conditions or dangerous positions), do
not wait for voice contact with the SOS
service operator, but exit from the car
immediately and go to a safe place, if in a
condition to do so.
WARNING Do not place network
antennas, CB radios or aftermarket
electrical equipment to avoid
interference. Such interference could
prevent the system form making the
emergency call.
WARNING Ignoring malfunction
warnings displayed by the Connect
system for a long time could lead to
being unable to make an SOS call when
needed.
Even if the SOS call system is fully
functional, factors outside the control
of FCA could interfere with or prevent
operation of the SOS call. Such factors
can be caused by the car electrical
systems not being intact, damage to
the SOS system during the accident,
obstructed or unavailable satellite
signals, network congestion, adverse
weather conditions, buildings, interfering
structures, tunnels, etc.
ASSIST CALLS
(for versions/markets where provided)
Pressing the graphic buttons fig. 224
located on the display of the Connect
system (for versions/markets, where
provided) to call to one or more of the
following services:
Roadside Assistance
: if case of need,
a connection will be established with the
roadside assistance authority which will
receive the vehicle type and its position
directly. Additional roadside assistance
charges may apply.
Customer Care
(for versions/markets,
where provided): Customer service to
provide support in case of problems to
the car.
NOTE The relative menus and the
Connect system status bar will change
display state depending on the actions
-------------------------------------------------------------------------------------------------------------------------------------------------------------
193
performed, and it will be possible to
monitor each stage of the assist call
(connection, duration, ending, connection
errors, etc.).
NOTE If the ASSIST call button is
pressed by mistake, the call can be ended
by pressing the cancel button on the
Connect system display.
Once the connection has been
established, the following data will be
automatically transmitted, as authorised
by the customer:
indication that the occupant has made
an ASSIST call;
the brand of the vehicle;
the most recent known GPS
coordinates of the vehicle;
the type of error that occurred on
the vehicle that automatically sent
the ASSIST request (in the case of an
automatic call - for versions/markets,
where provided).
The call will be made through the car
audio system to provide any additional
information about the assistance
request.
If the system is unable to establish the
voice call, or the line disconnects due
to insufficient coverage, the ASSIST
service will try to call the operational
centre again for certain number of times.
WARNING If you have not subscribed
to the related services or the Roadside
Assistance package has expired or is
unavailable for purchase, the ASSIST
call will not be available. For further
information visit the Alfa Romeo official
website.
WARNING If the ASSIST call system
detects a malfunction, it is indicated by a
corresponding message on the Connect
system display. Contact an Alfa Romeo
Dealership as soon as.
If an emergency call (SOS) is active and
an ASSIST call is requested, the latter
will not be delivered.
Alfa Connect Box SYSTEM BATTERY
The Alfa Connect Box system is provided
with an independent battery that allows
the operation of some connected
services even if the car battery is
disconnected.
The system will warn the user of
the need to replace this battery by
displaying a dedicated message on
the display of the Connect system (for
versions/markets where provided) and
by means of a notification via mobile app
(for versions/markets, where provided).
Go to an Alfa Romeo dealership as soon
as possible.
NOTE: Failure to replace the battery
and, consequently, failure to observe
the warnings provided by the system
could affect or entirely prevent service
operation.
NOTE Regardless of charge, the battery
must be replaced every 5 years by an
Alfa Romeo dealership.
REPLACING A BULB
160) 161) 162) 163)
69)
GENERAL INSTRUCTIONS
Before replacing a bulb check the
contacts for oxidation;
replace blown bulbs with others of the
same type and power;
after replacing a headlight bulb, always
check its alignment;
when a light is not working, check that
the corresponding fuse is intact before
changing the bulb. For the location of
fuses, refer to the paragraph "If a fuse
blows" in this chapter.
WARNING In some particular climate
conditions such as low teperature,
humidity or after washing the car, a thin
condensation layer may form on the
internal surfaces of the front and rear
headlights. This is a natural phenomenon
due to the difference in temperature and
humidity between the inside and the
outside of the transparent cover which
does not indicate a fault and does not
compromise the normal operation of
lighting devices. It will disappear during
normal use.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
IN AN EMERGENCY
194
WARNING
160)
Before replacing the bulb, wait for the
exhaust ducts to cool down: DANGER OF
SCALDING!
161)
Modifications or repairs to the electric
system that are not carried out properly
or do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
162)
Halogen bulbs contain pressurised
gas, in the case of breakage they may burst
causing glass fragments to be projected
outwards.
163)
Only replace the light bulbs when the
engine is off and in a position that does not
interfere with traffic and lets you safely
replace them (see the description in the
“Replacement” paragraph). Also ensure
that the engine is cold, to prevent the risk of
burns.
IMPORTANT
69)
Halogen bulbs must be handled holding
the metallic part only. Touching the
transparent part of the bulb with your
fingers may reduce the intensity of the
emitted light and even reduce the lifespan
of the bulb. In the event of accidental
contact, wipe the bulb with a cloth
moistened with alcohol and let the bulb dry.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
195
Light bulbs
Type
Power
Figure reference
Main beam headlights, front side lights/daylight running
lights (DRL) (*)
H15
55/15W
D
Dipped beam headlights (*)
H7
55W
D
Front direction indicators (*)
PY24W
24W
B
Fog lights (*)
H11
55W
E
Main beam/dipped beam headlights (Xenon gas discharge)
D3S
35W
F
Sun visor light
1.5CP
2.1W
C
Glove compartment light
W5W
4W
A
Boot light
W5W
5W
A
Puddle lights (under door panel)
W5W
5W
A
*
Only for basic version headlight with halogen main beam/dipped beam headlights
-------------------------------------------------------------------------------------------------------------------------------------------------------------
IN AN EMERGENCY
196
REPLACING AN EXTERNAL BULB
Front light cluster with main
beam/dipped beam halogen headlights
Dipped beam headlights
To change the bulb of these lights,
proceed as follows:
working from inside the engine
compartment fig. 225 remove the (1)
fig. 226;
remove the bulb/connector assembly
from the headlight body (2)fig. 226;
remove the bulb by sliding it off the
connector;
225
08026V0023EM
226
08026V0080EM
install the new bulb, making sure it is
correctly inserted in the connector;
then insert the bulb/connector
assembly in the housing on the headlight
body and make sure that it is locked
correctly;
refit the lid and cover, tightening the
fixing screws.
Main beam headlights
To change the bulb of these lights,
proceed as follows:
operating inside the engine
compartment fig. 225 remove the cover
fig. 227;
turn the bulb, bulb holder and
connector assembly (2) fig. 227
anticlockwise and then slide it off the
headlight body (3);
remove the bulb by sliding it off the
bulb holder;
227
08026V0081EM
install the new bulb, making sure it is
correctly inserted in the bulb holder;
then insert the bulb, bulb holder and
connector assembly in the housing on
the headlight body and turn it clockwise,
making sure that it is locked correctly;
refit the lid and cover, tightening the
fixing screws.
Direction indicators
To change the bulb of these lights,
proceed as follows:
working from inside the engine
compartment fig. 225 remove the (1)
fig. 228;
release the bulb, bulb holder and
connector assembly (2) and then slide it
off the headlight body fig. 228;
remove the bulb by sliding it off the
bulb holder;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
197
228
08026V0082EM
install the new bulb, making sure it is
correctly inserted in the bulb holder;
then insert the bulb, bulb holder and
connector assembly in the housing on
the headlight body and turn it clockwise,
making sure that it is locked correctly;
refit the lid and cover, tightening the
fixing screws.
Fog lights
(where provided)
To replace the fog lights, contact an Alfa
Romeo Dealership.
Front light cluster with main
beam/dipped beam Xenon gas
discharge headlights
To replace the bulbs of the main beam
headlights/dipped headlights contact an
Alfa Romeo Dealership.
REPLACING AN INTERNAL BULB
Courtesy mirror light
fig. 229: lift the
cover (1), remove the lens and replace
the bulb (2), releasing it from the side
contacts.
229
08026V0008EM
Glove compartment ceiling light
fig. 230: remove the ceiling light at the
point indicated by the arrow, open the
cover and replace the lamp.
230
08026V0009EM
Boot ceiling light
fig. 231: act at the point
indicated by the arrows, remove the
ceiling light and replace the lamp.
231
08026V0010EM
Puddle light on door panel
fig. 232: act at
the point indicated by the arrow, remove
the ceiling light and replace the lamp.
232
08026V0012EM
-------------------------------------------------------------------------------------------------------------------------------------------------------------
IN AN EMERGENCY
198
FUSES
GENERAL INFORMATION
164) 165) 166) 167) 168) 169)
70) 71)
For fuse replacement, contact an Alfa
Romeo Dealership.
When a device does not work, check
the condition of its protection fuse: the
filament (1) must be intact.
If it is not, replace the blown fuse with
another with the same ampere rating
(same colour).
2 = intact fuse / 3 = fuse with damaged
filament.
fig. 233: MINI fuse / fig. 234: J-CASE fuse.
233
08036S0001EM
234
08036S0002EM
Fuse tongs
To replace a fuse, use the tongs housed
in the boot fusebox cover fig. 235.
Grab the pliers from the upper tabs,
press them and extract the pliers pulling
upwards.
235
08036V0053EM
After use, refit the pliers in position,
proceeding as follows:
grasp the pliers from the upper tabs;
press the tongs in their housing,
pushing downwards, until they click into
place.
FUSEBOX UNDER PASSENGER SIDE
FOOTBOARD
To access the fuses, proceed as follows:
lift the upper end of the footboard (1)
fig. 236 on the passenger side, pulling it
to release the 2 buttons;
remove the panel (2) fig. 236,
extracting it downward, after unscrewing
the two fixing hooks;
236
08036V0020EM
-------------------------------------------------------------------------------------------------------------------------------------------------------------
199
The number identifying the electrical
component corresponding to each fuse is
shown on the control unit cover.
After replacing the fuse, make sure that
panel (2) and footboard (1) are correctly
locked.
BOOT FUSEBOX
To access the fuses, remove the cover
on the right side of the compartment and
then remove the fusebox cover fig. 237.
237
08036V0014EM
The number identifying the electrical
component corresponding to each fuse is
shown on the cover.
After replacing a fuse, make sure that
you have closed cover correctly.
WARNING
164)
For fuse replacement, contact an Alfa
Romeo Dealership.
165)
Never replace a fuse with another with
a higher amp rating; RISK OF FIRE.
166)
Before replacing a fuse, make sure
that the ignition device is at STOP and
that all devices are switched off and/or
disconnected.
167)
Contact an Alfa Romeo Dealership
if a safety system (air bags, brakes),
transmission system (engine, gearbox) or
steering system general protection fuse
blows.
168)
If a fuse blows again, contact an Alfa
Romeo Dealership.
169)
If a general protective fuse (MAXI-
FUSE, MEGA-FUSE, MIDI-FUSE) blows,
contact an Alfa Romeo Dealership.
IMPORTANT
70)
Never replace a faulty fuse with metal
wires or anything else.
71)
If it is necessary to wash the engine
compartment, take care not to directly hit
the fusebox and the window wiper motors
with the water jet.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
IN AN EMERGENCY
200
CONTROL UNIT UNDER PASSENGER SIDE FOOTBOARD
238
08036S0013EM
FUNCTION
FUSE
AMPERE
Front electric window (driver side)
F33
25
Front electric window (passenger side)
F34
25
Power supply for Connect system, Climate Control system, Alarm, Electric door
mirror folding, EOBD system, USB port
F36
15
-------------------------------------------------------------------------------------------------------------------------------------------------------------
201
FUNCTION
FUSE
AMPERE
Power Lock Device (Driver side door unlocking - where provided)/Door unlocking,
Central locking
F38
20
Windscreen washer pump
F43
20
Rear left electric window
F47
25
Rear right electric window
F48
25
Heater rear window coil, cigar lighter
F94
15
-------------------------------------------------------------------------------------------------------------------------------------------------------------
IN AN EMERGENCY
202
LUGGAGE COMPARTMENT FUSE BOX
239
08036V0015EM
FUNCTION
FUSE
AMPERE
Tow hook module (TTM/TTEBM)
F01
40
Hi-Fi system
F08
30
I-Drive / USB Socket / AUX / USB Charger
F21
10
KL15/a 12V Luggage compartment power socket
F22
20
-------------------------------------------------------------------------------------------------------------------------------------------------------------
203
FUNCTION
FUSE
AMPERE
Trailer light control unit power supply (+30)
F1
20
Trailer light control unit power supply (+30)
F2
15
Trailer socket (where provided) (+30)
F3
10
Tow bar (+15)
F4
10
-------------------------------------------------------------------------------------------------------------------------------------------------------------
IN AN EMERGENCY
204
CHANGING A WHEEL
170)
GENERAL INSTRUCTIONS
The car is equipped with the "Tyre Repair
Kit": see the “Tyre Repair Kit” paragraph
for how to use this device.
As an alternative to the “Tyre Repair Kit”,
the car may be requested with a space-
saver wheel: see the instructions on the
following pages for changing the wheel.
JACK
171)
Please note that:
the jack weighs about 4.4 lb (2 kg);
the jack requires no adjustment;
the jack cannot be repaired and in the
event of a fault it must be replaced by
another genuine one;
no tool other than its cranking device
may be fitted on the jack.
Jack maintenance:
prevent any dirt from depositing on
the "worm screw";
keep the "worm screw" lubricated;
never modify the jack.
Conditions in which not to use the jack:
temperatures below −40°F (-40°C);
on sandy or muddy ground;
on uneven ground;
on steep slopes in extreme weather
conditions: thunderstorms, typhoons,
hurricanes, blizzards, storms, etc.;
in direct contact with the engine or for
repairs under the car;
on boats.
CHANGING PROCEDURE
172) 173) 174) 175) 176)
72) 73)
Proceed as follows:
stop the car in a position that is not
dangerous for oncoming traffic where
you can change the wheel safely. The
car must be stopped in a lay-by, car-
park or parking or service area, and the
ground must be as level as possible and
sufficiently compact;
stop the engine, engage the hazard
warning lights and the electric parking
brake and activate P (Park) mode;
make sure that any passengers get
out of the car and go to a safe place
where they will not obstruct traffic or
be exposed to the risk of injury. In the
event of a puncture, change the tyre in
accordance with the laws of the country
in which you are travelling. Wear the
reflective safety jacket (compulsory by
law) before getting out of the car;
open the luggage compartment and lift
up the mat using the handle;
when the situation dictates it (for
your own safety and to comply with the
regulations in force in the country where
you are), take the warning triangle and
position it at a suitable distance from the
car;
unscrew the locking device (1) fig. 240,
take out the space-saver wheel and the
inflation compressor;
240
08066V0010EM
remove the damaged wheel by taking
the wrench (3) fig. 241 and loosening the
fixing bolts by about one turn. Shake the
car to help detach the rim from the wheel
hub;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
205
241
08066V0012EM
position the jack (4) fig. 242 under
the car, near the wheel to be changed,
taking care not to damage the plastic
aerodynamic guard;
lift the extension lever (2) on the
wrench (3);
242
08066V0013EM
turn the extension lever (2) clockwise
until the round pin on the jack engages in
the hole in the lifting block located about
15 cm from the outside edge of the body.
The lifting points (5) are shown infig. 242
and are marked by a triangle
on the
aerodynamic guard fig. 243;
243
09056V0001EM
warn anybody nearby that the car is
about to be raised;
they should stay clear and they should
be warned not to touch the car until it is
back on the ground;
turn the extension lever (2) until the
wheel is a few centimetres off the
ground;
remove the five wheel fastening bolts
and take the wheel off;
make sure the contact surfaces
between space-saver wheel and hub are
clean so that the fastening bolts will not
come loose;
fit the space-saver wheel by inserting
the first bolt for two threads into the
hole closest to the valve;
take the wrench 3 and fully tighten the
fixing bolts;
inflate the space-saver wheel by
removing the cap from its inflation valve
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст