Alfa Romeo Stelvio (2022 year). Manual in english — page 1
GETTING TO KNOW YOUR CAR
12
DASHBOARD
1
03036V0088EM
1 Exterior light switch / 2 Air vents / 3 Left-hand stalk (exterior lights) / 4 Steering wheel controls (Cruise Control (where provided)
/ Active Cruise Control (where applicable) / HAS system (where provided) / TSR system (where provided) / TJA system (where
provided) / ISC system (where provided) / 5 Instrument panel and instruments / 6 Steering wheel - driver side front airbag / 7 Right-
hand stalk (window wiper) / 8 Connect system / 9 Automatic dual-zone climate control system / 10 Glovebox / 11 Passenger side front
airbag
-------------------------------------------------------------------------------------------------------------------------------------------------------------
13
2
03036V0027EM
1 Exterior light switch / 2 Air vents / 3 Left-hand stalk (exterior lights) / 4 Steering wheel controls (Cruise Control (where provided)/
Active Cruise Control (where applicable) / HAS system (where provided) / TSR system (where provided) / TJA system (where
provided) / ISC system (where provided) / 5 Instrument panel and instruments / 6 Steering wheel - driver side front airbag / 7 Right-
hand stalk (window wiper) / 8 Connect system / 9 Automatic dual-zone climate control system / 10 Glovebox / 11 Passenger side front
airbag / 12 Bonnet opening lever
DASHBOARD (RIGHT-HAND DRIVE VERSION)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
GETTING TO KNOW YOUR CAR
14
THE KEYS
ELECTRONIC KEY
1)
1)
The car is equipped with an electronic
key with a Keyless Start function fig. 3,
provided in duplicate.
3
04016S0010EM
OPERATION
Unlocking the doors and the tailgate
Briefly press the
button: unlocking
of doors and tailgate, timed switching-
on of ceiling lights and single flashing of
direction indicators (if activated from
the Connect system).
When the function is available, press and
release the unlock button on the remote
control once only to unlock the driver's
door or twice within 1 second to unlock all
doors and the tailgate.
It is however possible to change the
current setting through the Connect
system menu, so that the system
unlocks:
all doors on the first press of the
remote control button;
only the driver door on the first press
of the remote control button (where
provided);
the tailgate, "independently" or "with
doors".
Moreover, the Connect system can
be used to activate or deactivate the
flashing of the direction indicators upon
locking/unlocking the doors and activate
the "courtesy light" function (dipped
beam headlights and direction indicators
switch on) upon unlocking the doors. For
further information, see paragraph
"Settings" in the "Connect" supplement.
The doors can always be unlocked by
putting the metal insert inside the driver
side door lock.
Door and tailgate locking
Briefly press the
button: locking of
doors and tailgate, timed switching-off
of ceiling lights and double flashing of
direction indicators (if activated from
Connect system).
If one or more doors are open, the doors
are locked and this is indicated by a
rapid flashing of the direction indicators
(where provided). The doors prepare for
locking, which is active from the moment
they are closed. The doors will unlock
again only if the key presence is detected
inside the passenger compartment.
The doors can always be locked by
putting the metal insert inside the driver
side door lock.
Automatic window opening/closing
function
(where provided)
Prolonged pressing of button : open all
windows.
Prolonged pressing of button : close all
windows.
Tailgate opening
Rapidly press the
button twice to
open the tailgate remotely. The direction
indicators will flash twice to indicate that
the tailgate has been opened.
REPLACING THE ELECTRONIC KEY
BATTERY
1)
To replace the battery, proceed as
follows:
press in the points shown fig. 4 and
slide the cover off downwards;
remove the key insert fig. 5;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
15
4
04016S0002EM
5
04016S0003EM
remove the battery cap fig. 6 by
rotating it anticlockwise;
remove the battery from its housing
fig. 7 and replace it with a new one of the
same type.
6
04016S0004EM
7
04016S0005EM
Proceed in reverse order to reassemble
the key.
WARNING The battery replacement
operation must be carried out with care,
in order not to damage the electronic
key.
REQUEST FOR ADDITIONAL KEYS
The system can recognise up to 8 keys
with remote control.
Only use keys that have been specially
coded for the car electronics.
If an electronic key is coded for a car, it
cannot be used on any other car.
Duplicating keys
If you need a new electronic key, go to
an Alfa Romeo Dealership, taking an
ID document and the car ownership
documents.
WARNING
1)
Do not swallow the battery. Danger of
chemical burns. The keys contain a small
battery. If the battery is swallowed, it
can cause severe internal burns in just 2
hours and cause death. Keep new and used
batteries out of the reach of children. If
the battery compartment does not close
securely, discontinue use of the product
and keep it out of reach of children. If you
believe that batteries may have been
swallowed or inserted inside the body,
seek medical attention immediately. The
emergency key (where provided) must be
immediately inserted into the electronic key
to prevent easy access to the battery.
IMPORTANT
1)
The electronic components inside the key
may be damaged if the key is subjected to
strong shocks. In order to ensure complete
efficiency of the electronic devices inside
the key, it should never be exposed to direct
sunlight.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
GETTING TO KNOW YOUR CAR
16
IMPORTANT
1)
Used batteries may be harmful to the
environment if not disposed of correctly.
They must be disposed of as specified by
law in the special containers or taken to an
Alfa Romeo Dealership, which will take care
of their disposal.
IGNITION DEVICE
OPERATION
2) 3) 4) 5) 6)
To activate the ignition device fig. 8
the electronic key must be inside the
passenger compartment.
8
04026V0001EM
The ignition device has the following
possible states:
STOP: engine off, steering column
locked. Some electrical devices (e.g.
central door locking system, alarm, etc.)
are still available;
ON (single button press): all electrical
devices are available. This state can be
selected by pressing the ignition device
button once, without pressing the brake
pedal;
AVV: engine starting. This state can be
selected by pressing the ignition device
button once and pressing the brake
pedal.
After starting the engine, insert the
electronic key into housing 1 fig. 9 beside
the shift lever on the central tunnel.
9
04206S0554EM
NOTE With the ignition device ON, if
30 minutes pass with P (Park) mode
engaged and the engine stopped, the
ignition device will automatically move to
the STOP position.
NOTE With the engine running, it is
possible to go away from the car taking
the electronic key with you. The engine
will still be running. The car will indicate
the absence of the key on board when
the door is closed.
WARNING If the battery was
disconnected, do not start the engine
immediately after reconnecting the
terminals, but press the start button,
without operating the pedals, to turn on
the instrument panel and then start the
engine.
The
symbol on the instrument panel
will remain on, indicating that the
steering must be initialised. To do this,
turn the steering wheel from one end
to the other and bring it back to the
centre position within 30 seconds from
starting the engine. If any red warning
lights on the remain lit on the instrument
panel, stop the engine, wait for at least
5 seconds and repeat the starting
procedure described above.
STARTING WITH FLAT KEY BATTERY
If the remote control battery is flat,
proceed as follows to start the car:
lift the front armrest;
lay the key on the indicated spot,
positioning as shown in fig. 10.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
17
10
04026S0995EM
STEERING COLUMN LOCK
(where provided)
Activation
The steering lock is engaged when the
driver door is opened with the ignition
device button at STOP.
Deactivation
The steering lock disengages when
the ignition device is pressed and the
electronic key is recognised.
WARNING
2)
Always take the key with you when
you leave your car to prevent someone
from accidentally operating the controls.
Remember to engage the electric parking
brake. Never leave children unattended in
the car.
3)
It is absolutely forbidden to carry out any
after-market operation involving steering
system or steering column modifications
(e.g. installation of anti-theft device) that
could adversely affect performance,
invalidate the warranty, cause SERIOUS
SAFETY PROBLEMS and also result
in the car not meeting type-approval
requirements.
4)
Before leaving the vehicle, ALWAYS
engage the handbrake. Activate mode P
(Park) and press the ignition device to set it
to STOP. When leaving the vehicle, always
lock all the doors by pressing the button on
the handle.
5)
For versions equipped with the Keyless
Start system, do not leave the electronic
key inside or near the car or in a place
accessible to children. Do not leave the car
with the ignition device in ON position. A
child could activate the electric window
winders, other controls or even start the car.
6)
If the ignition device has been tampered
with (e.g. an attempted theft), have it
checked over by the Alfa Romeo Dealership
before driving again.
ENGINE IMMOBILIZER
The Engine Immobilizer system prevents
unauthorised use of the car preventing to
start the engine.
The system does not need to be
enabled/activated: operation is
automatic, regardless of the fact that the
car's doors are locked or unlocked.
IRREGULAR OPERATION
If, during starting, the key code is not
correctly recognised, the
icon is
displayed on the instrument panel (see
the instructions in the "Warning lights
and messages" paragraph, "Knowing
the instrument panel" chapter). This
condition leads to the engine switching
off after 2 seconds. In this case, bring
the ignition device to STOP and then to
ON; if it is still blocked, try with the other
keys provided. If it is still not possible to
start the engine, contact an Alfa Romeo
Dealership.
If the
icon is displayed while driving,
this means that the system is running
a self-diagnosis (e.g. due to a voltage
drop). If the display persists, contact an
Alfa Romeo Dealership.
WARNINGS
Do not tamper with the Engine
Immobilizer system. Any
modifications/alterations could
-------------------------------------------------------------------------------------------------------------------------------------------------------------
GETTING TO KNOW YOUR CAR
18
cause the protection function to be
deactivated.
The Engine Immobilizer system is not
compatible with certain aftermarket
remote starting systems.
ALARM
(where provided)
ALARM ACTIVATION
The alarm goes off in the following cases:
wrongful opening of
doors/bonnet/boot (perimeter
protection);
operation of ignition device with a key
which is not validated;
cutting of the battery leads;
movement inside the passenger
compartment (volumetric protection,
where provided);
anomalous lifting/tilting of the car
(anti-lift protection, where provided).
Activation of the alarm triggers the horn
and the direction indicators.
WARNING The function is ensured by
the Engine Immobilizer system, which is
automatically activated when you get out
of the car taking the electronic key with
you and locking the doors.
WARNING The alarm is adapted to meet
requirements in various countries.
TURNING THE ALARM ON
With the doors, bonnet and boot closed
and the ignition device turned to STOP,
point the electronic key towards the car
and press and release button . The
alarm can also be engaged by pressing
the "door lock" button, located on the
door external handle. For further
information see the "Passive Entry" item
in the "Doors" paragraph.
Except on some versions for specific
markets, the system produces a visual
and acoustic warning and enables door
locking.
With the alarm on, the warning lights
on the door handle trims remain on
continuously fig. 11.
11
04046V0001EM
In case of faults the system will generate
a further acoustic signal.
If a second acoustic signal is emitted
after the alarm is switched on, wait about
4 seconds and switch off the alarm by
pressing the
button. Check that the
doors, bonnet and tailgate are closed
properly and then reactivate the system
by pressing the
button.
If the alarm emits an acoustic signal even
when the doors, tailgate and luggage
compartment are closed properly, a
system fault has occurred: in this case,
contact an Alfa Romeo Dealership
TURNING THE ALARM OFF
Press the button. The following actions
are performed:
two brief flashes (where provided) of
the direction indicators;
two brief acoustic signals (where
provided);
doors are unlocked.
The alarm can also be disengaged by the
holder of the key, by grasping one of the
front handles. For further information
see the "Passive Entry" item in the
"Doors" paragraph.
WARNING The alarm does not switch off
when the central opening is activated
using the metal insert in the key.
VOLUMETRIC/ANTI-LIFTING
PROTECTION
(where provided)
To ensure the correct operation of the
protection, completely close the side
windows.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
19
To exclude the function, press button
fig. 12 before activating the alarm.
When the function is turned off, this
is indicated by the LED on the button
flashing for several seconds.
12
04046S0002EM
DISARMING THE ALARM
To completely disable the alarm (e.g.
during a long period of car inactivity),
lock the doors by turning the metal
insert, found inside the electronic key, in
the door lock.
DOORS
LOCKING/UNLOCKING DOORS FROM
THE INSIDE
Central locking/unlocking
If all doors are closed properly, they will
automatically be locked once the vehicle
has exceeded approximately 12 mph (20
km/h) ("Auto relock" function active).
Press the button on the driver side ,
passenger side fig. 13 or rear (where
provided) door panel trims to lock the
doors.
With the doors locked, press the
button on the front door panel trims to
unlock them.
13
04056V0001EM
LOCKING/UNLOCKING DOORS FROM
THE OUTSIDE
Locking from the outside
With the doors closed, press the
button on the key.
In any case, the doors can be locked with
all the doors closed and the tailgate
open. When the button
on the key
is pressed, all the locks are closed,
including that of the open tailgate. The
latter will be locked when it is closed.
2)
Door unlocking from the outside
Press the button
on the key.
Locking/unlocking doors from the
outside in an emergency
If the battery is flat or the remote control
is faulty, you can lock/unlock the doors
from the outside by inserting and
rotating the metal insert (available inside
the electronic key) in the lock of the
driver side door.
PASSIVE ENTRY
(where provided)
3)
The Passive Entry system can identify
the presence of an electronic key near
the doors and the tailgate.
The system enables the doors (or the
tailgate) to be locked/unlocked without
pressing any buttons on the electronic
key.
The key is detected only after the
system recognises the presence of a
hand in one of the front handles. If the
detected key is valid, the doors and the
tailgate are unlocked (the elements that
open depend on the Connect system
settings).
-------------------------------------------------------------------------------------------------------------------------------------------------------------
GETTING TO KNOW YOUR CAR
20
Where the function is provided, grasping
the handle of the driver's door unlocks
the driver's door only, or all the doors,
depending on the mode set in the
Connect system.
WARNING If wearing gloves, or if it has
rained and the door handle is wet, the
activation sensitivity of the Passive
Entry function may be reduced, resulting
in a longer reaction time.
Door locking
To lock the doors, proceed as follows:
make sure that you have the electronic
key and are close to the driver or
passenger side door handle;
press the "door locking" button fig. 14
on the handle: this will lock all the doors
and the tailgate. Locking the doors will
also activate the alarm (where provided).
14
04056S0003EM
WARNING After pressing the "door
locking" button, you need to wait two
seconds before the doors can be
unlocked again using the door handle. It is
therefore possible to check whether the
car is locked correctly by pulling the door
handle within 2 seconds. The doors will
not be unlocked again.
The doors and tailgate can anyway
be locked pressing button
on the
electronic key or on the inner door panel.
Driver side door emergency opening
If the electronic key does not work, e.g.
because its battery is flat or the car
battery is flat, the emergency metal
insert inside the key can anyway be used
to operate the lock, unlocking the driver
side door.
To extract the metal insert, proceed as
follows:
Press in the points shown fig. 15 and
slide the cover off downwards;
remove the key insert from its housing
fig. 16;
insert the metal insert in the driver
side door lock and turn it to unlock the
door.
15
04016S0002EM
16
04016S0003EM
NOTE The metal insert of the key has
no forced insertion direction and can be
inserted indifferently in the lock.
WARNINGS
To avoid leaving the electronic key inside
the car accidentally, the Passive Entry
function features an automatic door
unlocking function.
If one of the car doors is open and the
"door lock" button fig. 17 is pressed
located on the front door handles, or the
-------------------------------------------------------------------------------------------------------------------------------------------------------------
21
button
in the door panel inner trim
fig. 18, once all the doors are closed, the
car checks the inside and outside of the
car to check for the presence of enabled
electronic keys.
17
04056S0003EM
18
04056V0001EM
Do not push the lock/unlock door
button fig. 17 and push the handle
simultaneously (see fig. 19).
19
04056S0004EM
If one of the electronic keys is detected
inside the car and no other active
electronic key is detected outside
the car, the Passive Entry function
automatically unlocks all the car doors,
sounds three times and operates the
direction indicators.
If, on the contrary, one or more
electronic keys are inside the passenger
compartment, pressing the button
on
the remote control the keys inside the
passenger compartment are temporarily
disabled.
The car will
not unlock
the doors if one of
the following situations is present:
an unauthorised electronic key close
to the car has been detected outside.
If the Passive Entry function is
disabled using the Connect system, the
protections to avoid leaving accidentally
the electronic key inside the car are
deactivated.
Boot access
Approach the tailgate with a valid
electronic key and press the opening
button fig. 20 to access the boot.
20
04056V0005EM
WARNING If the electronic key is
inadvertently forgotten inside the boot
and an attempt is made to close it
from the outside, the tailgate will not
lock unless another electronic key is
recognised outside and close to the car.
With the doors locked, if only the tailgate
is unlocked and a key is detected inside
when it is locked again, the tailgate will
be unlocked again and the lights will flash
twice.
WARNING Before driving make sure the
tailgate is closed correctly.
Tailgate locking
The tailgate may still be locked by
pressing the
button on the electronic
key, by pressing the door lock button on
-------------------------------------------------------------------------------------------------------------------------------------------------------------
GETTING TO KNOW YOUR CAR
22
the external handles or by pressing the
button on the door panel.
System activation/deactivation
The Passive entry system can be
activated/deactivated using the Connect
system.
POWER LOCK DEVICE
(where provided)
7)
This safety device inhibits the operation
of the interior door handles and the door
locking/unlocking button.
It thereby prevents the opening of
the doors from inside the passenger
compartment, serving as an obstacle to
break-in attempts (e.g. broken window).
We recommend that you activate the
device each time you park your car.
Activating the device
The device is enabled on all the doors by
pressing the
button on the key twice
quickly.
The direction indicators flash 3 times to
let you know that the device is active.
If one or more of the doors are not closed
correctly, the device will not activate,
thus preventing a person from getting
stuck inside the passenger compartment
by entering the car through, and then
closing, the open door.
Deactivating the device
The device disengages automatically:
when the doors are unlocked (pressing
button
on the key with remote
control);
when the ignition device is set to ON.
CHILD LOCK
8) 9)
This system prevents the rear doors
from being opened from the inside.
This device (1) can be engaged only with
the doors open:
position : device engaged (door
locked);
position : device not engaged (door
may be opened from the inside).
The device remains engaged even if the
doors are electrically unlocked.
WARNING The rear doors cannot be
opened from the inside when the child
lock is engaged.
21
04056S0037EM
UNLOCKING THE DOORS WITH A FLAT
BATTERY
Proceed as follows to unlock the doors if
the car battery is flat.
Rear doors and passenger door
Proceed as follows:
insert the metal insert of the
electronic key in the release device
housing (2) fig. 21;
turn the key clockwise for the right
door locks or anticlockwise for the left
door locks;
remove the key from the housing.
Proceed in one of the following ways to
realign the door lock device (only when
the battery charge has been restored):
press the
button on the electronic
key;
press the
button on the door panel;
open by inserting the key insert in the
driver's door lock;
operate the internal door handle.
WARNING For the rear doors, if the
child lock device was engaged and the
previously described locking procedure
carried out, operating the internal handle
will not open the door but will only realign
the lock release device. To open the door,
the outside handle must be used. The
door central locking/unlocking buttons
are not deactivated when the emergency
lock is engaged.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
23
WARNING
7)
Once the Power Lock system is engaged,
it is impossible to open the doors from
inside the car. Before getting out of the car,
please therefore check that there is no-one
left inside.
8)
NEVER leave children unattended inside
the car, let alone leave the car with the
doors unlocked in a place that children can
access easily. Children may seriously, or
even fatally, injure themselves. Also ensure
that children do not inadvertently operate
the electric parking brake, the brake pedal
or the automatic transmission lever.
9)
Always use this device when carrying
children. After engaging the device on both
rear doors, check that it is actually engaged
by trying to open a door with the internal
handle.
IMPORTANT
2)
Make sure to take the key with you once
a door or the boot is locked, to prevent
forgetting the key inside the car. If the key is
locked inside, it can only be retrieved by
using the second key provided.
3)
The operation of the recognition system
depends on various factors, such as, for
example, any electromagnetic wave
interference from external sources (e.g.
mobile phones), the charge of the battery in
the electronic key and the presence of metal
objects near the key or the car. In these
cases it is still possible to unlock the doors
by using the metal insert in the electronic
key (see description on the following pages).
SEATS
WARNING Carry out the adjustment
while sitting on the seat involved (driver
side or passenger side).
Driver seat adjustment must also be
carried out remembering that, keeping
the shoulders resting firmly against the
backrest, the wrists must be able to
reach the top of the steering wheel rim.
It must also be possible to fully press the
brake pedal with the left foot.
FRONT SEATS WITH MANUAL
ADJUSTMENT
10)
4)
Longitudinal adjustment
11)
Lift lever (1) fig. 22 and push the seat
forwards or backwards.
22
04066V0001EM
Height adjustment
Pull lever B (2) fig. 22 upward or push
downward to reach the desired height.
Backrest angle adjustment
Use lever (3) fig. 22 to adjust the
backrest angle, accompanying it with
the movement of the torso (operate
the lever until the desired position is
reached, then release it).
Folding the backrest forward
(where provided)
The front passenger seat can be folded
forward by operating lever (3) fig. 22.
During this operation, accompany the
backrest down with your free hand.
Folding the backrest down further
increases the size of the load
compartment.
“SPARCO” CARBONSHELL SPORT
SEATS
(where provided)
Longitudinal adjustment
Lift lever (1) fig. 23 and push the seat
forwards or backwards.
11)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
GETTING TO KNOW YOUR CAR
24
23
04066S0002EM
Height adjustment
(electric)
Press the button (2) fig. 23 up or down
until the required height is reached.
Backrest angle adjustment
Use lever (3) fig. 23 to adjust the
backrest angle, accompanying it with
the movement of the torso (operate
the lever until the desired position is
reached, then release it).
ELECTRICALLY ADJUSTABLE FRONT
SEATS
5)
These buttons for electrically to adjust
the seat height, the lengthwise position
in relation to the car and the angle of the
backrest.
24
04066V0003EM
Height and/or cushion tilt adjustment
Act on the rear part of the switch (1)
fig. 24.
Longitudinal adjustment
Push switch (1) fig. 24 forwards or
backwards to move the seat in the
corresponding direction.
Backrest angle adjustment
Push switch (2) fig. 24 forwards or
backwards to adjust the backrest in the
corresponding direction.
Power lumbar adjustment
Use the joystick (3) fig. 24 to operate the
lumbar support device.
WARNING The electrical adjustment is
only allowed when the ignition device is
turned to ON and for about 2 minutes
after it is turned to STOP. The seat can
also be moved after opening/closing
the door for about 2 minutes; car
locking/unlocking or switching on of the
centre front ceiling light.
Seat angle adjustment (tilting)
(where provided)
The seat angle can be set to four
positions. Lift or lower the front of
control (1) fig. 24 to move the front of
the seat in the corresponding direction.
Release control (1) when the seat has
reached the desired position.
Backrest width adjustment
(where provided)
Push the switches (4) fig. 24 to adjust the
width of the backrest by means of the
lateral padding.
Seat cushion extension
(where provided)
Lift the lever (6) fig. 25 and push the front
of the cushion forward or back. It can
move a few centimetres.
25
04066S0017EM
-------------------------------------------------------------------------------------------------------------------------------------------------------------
25
Storing the driver’s seat positions
The buttons (5) fig. 26 allow you to store
and recall three different driver’s seat
positions.
You can store and recall for 20 minutes
with the ignition device in the STOP
position or with the ignition device in
the ON position, the engine running and
the car moving. The performed position
memorisation is confirmed by a beep.
To memorise a seat position, adjust it
with the various controls, then press the
button where you want to memorise the
position for 1.5 seconds.
To memorise the position. When a
new seat position is memorised, the
previously memorised position on
the same button is automatically
overwritten.
Recalling a memorised position is also
possible for about 3 minutes after the
doors are opened and about 1 minute
after the engine is stopped. To recall a
memorised position, press the relevant
button briefly.
26
04066V0015EM
EASY ENTRY FUNCTION
The Easy Entry function is designed to
retract the driver side seat automatically
by 2.36 in (60 mm) to make it easier for
the driver to get in and out of the car.
The movement is activated only if the
seat is set to a driving position which is in
“front” of the central pillar of the car.
The function is associated with
electrically adjustable front seats for
each of the three stored positions.
The Easy Entry function can be
activated/deactivated using the Connect
system.
Activating entrance mode
With the door open and the ignition
switch at STOP, the driver side seat will
be in a position retracted by 2.36 in
(60 mm) with respect to the driving
position set by the user.
When the door is closed and the ignition
device is in the ON position, the seat will
automatically return to the set driving
position.
If the seat is moved manually while it is
still in retracted position, it will remain
in the new set position when the car is
entered again.
NOTE If the seat is moved manually
while it is still in retracted position, it will
remain in the new set position when the
car is entered again.
Activating entrance mode
With the door open and the ignition
switch at STOP, the driver side seat will
be in a position retracted by 2.36 in
(60 mm) with respect to the driving
position set by the user.
When the door is closed and the ignition
device is in the ON position, the seat will
automatically return to the set driving
position.
WARNING If the seat is moved manually
while it is still in retracted position, it will
remain in the new set position when the
car is entered again.
Activating exit mode
In order to help the driver get out of the
car, the driver side seat will move back by
2.36 in (60 mm) when the ignition device
is in STOP mode and the driver side door
is opened.
NOTE Pressing any button on the
seat memory or control panel will
immediately interrupt the automatic
-------------------------------------------------------------------------------------------------------------------------------------------------------------
GETTING TO KNOW YOUR CAR
26
positioning function (antipanic function).
The operation must be repeated to
complete the function.
FRONT AND REAR SEAT ELECTRIC
HEATING
(where provided)
Front seats
With ignition device at ON, press the
buttons
fig. 27 on the dashboard.
27
04066V0110EM
You can select three heating levels:
"
maximum heating
": three LEDs lit on
the buttons;
"
medium heating
": two LEDs lit on the
buttons;
"
minimum heating
": one LED lit on the
buttons.
Rear seats
(where provided)
With the ignition device in the ON
position, press the buttons
fig. 28
located in the rear part of the central
tunnel to activate the rear seat heating.
28
04046V0002EM
You can select three heating levels:
"
maximum heating
": three LEDs lit on
the buttons;
"
medium heating
": two LEDs lit on the
buttons;
"
minimum heating
": one LED lit on the
buttons.
After selecting one heating level, you
need to wait for a few minutes until warm
air flows into the compartment.
When the "maximum heating" setting is
selected, the heater produces a boosted
heat level for the first minutes of
operation. After this, the heat lowers to
reach the normal temperature level for
the selected function.
The seat heating function can also be
activated using the Connect system:
see the description on the dedicated
supplement.
WARNING The electric heating function
cannot be activated when the engine off.
It only works with the engine running.
WARNING The set heating level is
stored when the engine is stopped and is
restored if the engine is restarted within
a few minutes, otherwise the system will
remain off.
REAR SEATS
12)
The rear seats can accommodate two
passengers (QV version) or three
passengers (other versions).
The seats and the seatbelts are
considered as components of the
protection system for the car's
occupants.
WARNING Refer to the "Passenger
protection systems" paragraph in the
"Safety" chapter for the positioning of
the seat belts.
SPLIT FOLDING REAR SEAT
Partial extension of the boot (1/3 or
2/3)
Extending the right side of the boot (1/3
of the rear seat) allows you to carry two
passengers on the left part of the rear
seat, while extending the left side (2/3
of the rear seat) allows you to carry one
passenger.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
27
completely lower the rear seat head
restraints;
place the seat belt so that it doesn't
impede the movement of the backrest
while tilting it;
operate the left-hand lever (1), fig. 29
(inside the boot) to fold down the left
side, or the mirror image right-hand
lever to fold down the right side of
the backrest. It will fold forwards
automatically. If necessary, accompany
the backrest during the initial stage of
tilting.
29
04066V0009EM
Full expansion of the boot
Tilting the rear seat completely forwards
allows maximum loading volume.
Proceed as follows:
completely lower the rear seat head
restraints;
place the seatbelts so that they don't
impede the movement of the backrest
while tilting it;
operate the levers (1) fig. 29 to fold
down the backrests. They will fold
forwards automatically. If necessary,
accompany the backrests during the
initial stage of tilting.
It is also possible to disengage sections
of the rear seat from inside the luggage
compartment using one of the two levers
located under the rear seat fig. 30. Each
lever folds down the section of the
backrest on the same side.
30
04066V0007EM
Repositioning seat backrests
13)
Move the seatbelts to the side, making
sure that they are correctly extended
and not twisted and that they are not
trapped behind the backrests of the
seats, then lift the backrests pushing
them back until you hear the locking click
on both attachment mechanisms.
Central backrest section tilting
Before tilting the backrest, make sure
that the rear central seat belt is not
fastened and that there are no objects
in the central part of the cushion (if there
are any, remove them).
Using the fig. 31 strap, release the central
part of the backrest from its housing and
tilt it using the head restraint.
31
04066V0008EM
Central backrest section repositioning
Using the head restraint, lift the central
portion upwards, accompanying it during
its movement, lightly press to make sure
that it is properly attached. Make sure
that the armrest is properly attached
by trying to move it. If it is not attached
correctly, repeat the operation.
Proceed as follows:
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст