Alfa Romeo Giulia (2022 year). Manual in english — page 15

TECHNICAL SPECIFICATIONS

242

2.0 T4 MAir

200 HP

280 HP

Cycle

Otto

Otto

Number and position of cylinders

4 in line

4 in line

Piston bore and stroke (mm)

84 / 90

84 / 90

Total displacement (cm³)

1995

1995

Compression ratio

10 ± 0.4

10 ± 0.4

Maximum power (ECE) (kW)

147

206

Maximum power (ECE) (HP)

200

280

Corresponding engine speed (rpm)

4500

5250

Maximum torque (ECE) (Nm)

330

400

Maximum torque (ECE) (kgm)

33.7

40.8

Corresponding engine speed (rpm)

1750

2250

Spark plugs

NGK ILZKR7G

Fuel

Unleaded petrol with at least 95 R.O.N.

(EN228 specifications)

243

2.2 JTD

160 HP

190 HP

210 HP

Cycle

Diesel

Diesel

Diesel

Number and position of cylinders

4 in line

4 in line

4 in line

Piston bore and stroke (mm)

83 / 99

83 / 99

83 / 99

Total displacement (cm³)

2143

2143

2143

Compression ratio

15.5 ± 0.4

15.5 ± 0.4

15.5 ± 0.4

Maximum power (ECE) (kW)

118

140

154

Maximum power (ECE) (HP)

160

190

210

Corresponding engine speed (rpm)

3500

3500

3500

Maximum torque (ECE) (Nm)

450

450

470

Maximum torque (ECE) (kgm)

45.89

45.89

47.9

Corresponding engine speed (rpm)

1750

1750

1750

Fuel

Automotive diesel fuel (EN590 and EN16734 specifications)

TECHNICAL SPECIFICATIONS

244

TRANSMISSION

Version

Gearbox

Traction

2.9 V6

Eight forward gears plus reverse with

synchronisers for forward gears and reverse

Rear

2.0 T4 MAir

Eight forward gears plus reverse with

synchronisers for forward gears and reverse

Rear

or

All-wheel drive

2.2 JTD

Eight forward gears plus reverse with

synchronisers for forward gears and reverse

Rear

or

All-wheel drive

245

RIMS AND TYRES

Alloy rims. Tubeless radial carcass tyres.
All approved tyres are listed in the

Registration Document.
WARNING If there are any discrepancies

between the Owner Handbook and

the Registration Document, take the

information from the latter. For safe

driving, the car must be fitted with tyres

of the same make and type on all wheels.
WARNING Do not use air chambers with

tubeless tyres.
WARNING Using tyres of a different

size, type, brand or design at the front

and rear may adversely affect car

driveability. We recommend using tyres

approved by the manufacturer. The

manufacturer cannot determine if

unapproved tyres are suitable for use

and therefore cannot guarantee vehicle

safety in those conditions.

CORRECT READING OF THE TYRE

Example

fig. 249: 215/65 R16 98H

249

10096S0001EM

215

Nominal width (S, distance in mm

between sides)

65

Height/width ratio (H/S), expressed

as a percentage

R

Radial tyre

16

Rim diameter in inches (Ø)

98

Load rating (capacity)

H

Maximum speed rating

Maximum speed index

Q

up to 160 km/h

R

up to 170 km/h

S

up to 180 km/h

T

up to 190 km/h

U

up to 200 km/h

H

up to 210 km/h

V

up to 240 km/h

W

up to 270 km/h

Y

up to 300 km/h

Maximum speed index for snow tyres

QM+S

up to 160 km/h

TM+S

up to 190 km/h

HM+S

up to 210 km/h

Load index (capacity) (*)

60

= 250 kg

80

= 450 kg

61

= 257 kg

81

= 462 kg

62

= 265 kg

82

= 475 kg

63

= 272 kg

83

= 487 kg

64

= 280 kg

84

= 500 kg

65

= 290 kg

85

= 515 kg

66

= 300 kg

86

= 530 kg

67

= 307 kg

87

= 545 kg

68

= 315 kg

88

= 560 kg

69

= 325 kg

89

= 580 kg

70

= 335 kg

90

= 600 kg

71

= 345 kg

91

= 615 kg

72

= 355 kg

92

= 630 kg

73

= 365 kg

93

= 650 kg

74

= 375 kg

94

= 670 kg

TECHNICAL SPECIFICATIONS

246

Load index (capacity) (*)

75

= 387 kg

95

= 690 kg

76

= 400 kg

96

= 710 kg

77

= 412 kg

97

= 730 kg

78

= 425 kg

98

= 750 kg

79

= 437 kg

(*) The capacity may be less, depending on

the tyre inflation pressure prescribed for

the car. The load index remains the same

and does not depend on the pressure of

use.

CORRECT READING OF THE RIM CODE

Example

fig. 249: 7J x 17 H2 ET 40

7

width of the rim in inches (1).

J

rim drop centre outline (side projection

where the tyre bead rests) (2).

17

fitting diameter, expressed in inches

(corresponds to the diameter of the tyre

that should be fitted) (3 = Ø).

H2

shape and number of humps

(circumference measurement which

keeps the bead of tubeless tyres in

position on the rim).

ET 40

: wheel compensation (distance

between the disc/rim supporting plane

and the wheel rim centre line).

Tyre types - All Season tyres

(where provided)

All Season tyres ensure perfect traction

in all seasons of the year (spring,

summer, autumn and winter). Their

traction capacity may vary from one All

Season tyre manufacturer to another.
This type of tyre has an M+S, M&S, M/S

or MS marking on its side.
WARNING Always fit four All Season

tyres on the car: failure to do so could

compromise the driving stability of the

car and damage the suspension.

SNOW CHAINS

102)

Rear Wheel Drive and All-wheel drive

versions

The use of 0.27 inch (7 mm) snow chains

is permitted on all tyres. For tyres up to

225 mm in width (225/55 R16, 225/50 R17,

225/45 R18), it is also possible to install

0.5 in (9 mm) chains.

QV version

It is possible to put chains on the rear

265/35 R19 tyre (winter tyre size).

Avoid using traditional chains as

they can damage the braking system

if not installed correctly, thereby

compromising the car’s safety.
We strongly advise using zero-clearance

chains and to use equipment proposed

by the Dedicated Alfa Romeo Dealership.

Important notes

The use of snow chains should be in

compliance with local regulations of

each country. In certain countries, tyres

marked with code M+S (Mud and Snow)

are considered as winter equipment;

therefore their use is equivalent to that

of the snow chains.
The snow chains may be applied only to

the rear wheel tyres.
Check the tension of the snow chains

after the first few metres have been

driven.
WARNING Using snow chains with

tyres with non-original dimensions may

damage the vehicle.
WARNING Using different size or

type (M+S, snow, etc.) tyres between

front and rear axle may adversely

affect car driveability, with the risk of

losing control of the car and resulting

accidents.

IMPORTANT

102)

Keep your speed down when snow

chains are fitted; do not exceed 50 km/h.

Avoid potholes, do not drive over steps or

pavements and do not drive long distances

over roads without snow, to avoid damaging

both your car and the road surface.

247

RIMS AND TYRES PROVIDED

211)

Model

Position

Rims

Tires

2.9 V6

Front

19x8.5J

245/35 ZR19 93Y XL

Rear

19x10J

285/30 ZR19 98Y XL

2.0 T4 MAir
2.2 JTD

Front & Rear

16x7J (*)

225/55 R16 95W (*)

Front & Rear

17x7.5J

225/50 R17 98Y XL or 94W

Front & Rear

18x8J

225/45 R18 91Y or 91W / 95V (**)

Front

Rear

18x8J (***)
18x9J (***)

225/45 R18 91Y (***)

255/40 R18 95Y (***)

Front & Rear

19x8J

225/40 R19 89W or 89Y or 93Y

Front

Rear

19x8J (***)
19x9J (***)

225/40 R19 89W or 89Y or 93Y (***)

255/35 R19 92W or 92Y or 96Y (***)

(*) Incompatible with augmented braking systems
(**) All Season tyres, where available
(***) Matching rims/tyres

NOTE In partnership with Pirelli, Alfa Romeo has developed a range of winter tyres specially for the Alfa Romeo Giulia. They can be

identified by the “AR” mark. The “AR” tyres ensure the best vehicle performance and safety. Alfa Romeo cannot guarantee that non-

approved tyres are suitable, and they may cause vehicle malfunctions.

2.9 V6 engine

: winter tyres are available in the following sizes: 245/35 R19 93V XL and 285/30 R19 98V XL.

2.0 T4 MAir and 2.2 JTD engines

: winter tyres are available in the following sizes: 225/50 R17 94H, 225/45 R18 91H (on 18x8J rims) and

225/40 R18 95H (on 18x9J rims).
Always check the registration certificate for the tyres that can be installed (size, load index, speed symbol).

TECHNICAL SPECIFICATIONS

248

COLD TYRE INFLATION PRESSURE

When the tyres are warm, the inflation pressure should be +4.35 psi (+0.3 bar) in relation to the recommended figure. However,

recheck that the value is correct with the tyre cold.
If it is necessary to raise the vehicle, refer to the "Raising the vehicle" paragraph in the "In an emergency" chapter.
The pressures given below apply to all tyre types: summer, winter and all season (where provided).

2.9 V6 Engine

Tyres

Unladen/medium load [psi / bar]

Full load [psi / bar]

Front

Rear

Front

Rear

245/35 R19

34.8 / 2.4

–

42.2 / 2.9

–

265/35 R19 (*)

–

31.9 /2.2

–

42.2 / 2.9

285/30 R19

–

31.9 /2.2

–

42.2 / 2.9

(*) Recommended tyre when it is necessary to install snow chains (refer to the “Snow chains” chapter for further details).

2.0 T4 MAir and 2.2 JTD engines

Tyres

Unladen/medium load [psi / bar]

Full load [psi / bar]

Front

Rear

Front

Rear

225/55 R16

31.9 / 2.2

34.8 / 2.4

39.2 / 2.7

43.5 / 3.0

225/50 R17

31.9 / 2.2

34.8 / 2.4

39.2 / 2.7

43.5 / 3.0

225/45 R18

31.9 / 2.2

34.8 / 2.4

39.2 / 2.7

43.5 / 3.0

225/45 R18

29.0 / 2.0

–

34.8 / 2.4

–

255/40 R18

–

31.9 / 2.2

–

37.7 / 2.6

225/40 R19

34.8 / 2.4

37.7 / 2.6

39.2 / 2.7

43.5 / 3.0

225/40 R19

34.8 / 2.4

–

39.2 / 2.7

–

249

Tyres

Unladen/medium load [psi / bar]

Full load [psi / bar]

Front

Rear

Front

Rear

255/35 R19

–

33.4 / 2.3

–

42.2 / 2.9

WARNING

211)

If winter tyres with a lower speed rating than that indicated in the Registration Document are used, do not exceed the maximum speed

corresponding to the speed rating of the tyres used.

TECHNICAL SPECIFICATIONS

250

DIMENSIONS

Dimensions are expressed in inches/mm and refer to the car equipped with its original tyres. Height is measured with car unladen.

250

10106S0001EM

A

B

C

D

E

F

G

H

I

31.3 / 795

111 / 2820

40.5 / 1028

182.8 / 4643

183 / 4650 (*)

55.5 / 1411

56.6 / 1438

61.3 / 1557

64.2 / 1630

79.7 / 2024

73.2 / 1860

(*) Veloce version

Small variations with respect to the reported values are possible depending on the dimensions of the rims.

251

QUADRIFOGLIO VERSION

Dimensions are expressed in mm and refer to the car equipped with its original tyres. Height is measured with car unladen.

251

10106S0002EM

A

B

C

D

E

F

G

H

I

31.3 / 795

111 / 2820

40.3 / 1024

182.6 / 4639

56.2 / 1428
56.4 / 1433

61.22 / 1554

63.27 / 1606

79.68 / 2024

73.74 / 1873

LUGGAGE COMPARTMENT VOLUME
Capacity (V.D.A. standards)

Non-folding rear seats (unladen car):

105.6 UK gal (480 litres).

TECHNICAL SPECIFICATIONS

252

WEIGHTS AND LOADS

To identify the weights and loads for

your car, refer to the plate shown in
fig. 252 and described in the “Vehicle

identification number (VIN) plate"

chapter or refer to the car registration

certificate showing the type-approved

weights (for markets, where provided).

D

: Maximum authorised weight of car

fully laden (GVW).

E

: Maximum authorised weight of fully

laden car (GVW) plus trailer. If there is no

value in the field or if there is a dash, it

means that the car cannot tow.

F

: Maximum permitted weight on first

front axle.

G

: Maximum permitted weight on second

rear axle.

252

10106S0090EM

To calculate the towable weight with

a braked trailer, take the difference

between values (E) e (D) shown on the

plate.

E.g.: E=8052 lb (3660 kg) - D= 4532 lb

(2060 kg)
Braked trailer = 3527 lb (1600 kg)
WARNING

Do not exceed the indicated

trailer and towable weights

.

WARNING

Respect the vehicle towing

capacities

.

WARNING

Never exceed the maximum

permitted load indicated on the plate

(

E

).

253

TOWABLE WEIGHTS (lb / kg)

2.9 V6

2.0 T4 MAir

2.2 JTD

RWD versions RWD versions

AWD

versions

RWD versions

AWD versions

GVW

4740 / 2150

4532 / 2060

4664 / 2120

4598 / 2090

4785 / 2175

Towable loads

A

–

3527 / 1600

3527 / 1600

3527 / 1600

3527 / 1600

B

–

1642 / 745

1642 / 745

1642 / 745

1642 / 745

C

–

141/ 64

141 / 64

141 / 64

141 / 64

D

–

110 / 50

110 / 50

110 / 50

110 / 50

A

= TOWABLE WEIGHT

B

= UNBRAKED TRAILER

C

= LOAD ON TOW HOOK

D

= LOAD ON ROOF

TECHNICAL SPECIFICATIONS

254

REFUELLING

2.9 V6

2.0 T4 MAir

Prescribed fuels and original

lubricants

Fuel tank [UK gal / litres]

12.76 (58)

12.76 (58)

Unleaded petrol
(EN228 specifications)

including a reserve of [UK gal /

litres]

1.98 (9.0)

1.98 (9.0)

Main cooling system (UK gal /

litres)

2.46 (11.2)

1.89 (8.6)

50% mixture of distilled water and

PARAFLU UP (*)

Secondary cooling system [UK gal /

litres)]

1.21 (5.5)

0.95 (4.3)

Engine oil filter [UK gal / litres]

–

0.13 (0.6)

SELENIA QUADRIFOGLIO (2.9 V6

engine) / SELENIA DIGITEK P.E.

(2.0 T4 MAir engine)

Engine oil sump [UK gal / litres]

–

1.01 (4.6)

Engine sump and filter [UK gal /

litres)]

1.42 (6.5)

–

Hydraulic brake circuit [UK gal /

litres]

0.2 (0.9)

0.2 (0.9)

TUTELA BRAKE FLUID EXTREME

HT

Windscreen washer tank [UK gal /

litres]

0.92 (4.2)

0.92 (4.2)

PETRONAS DURANCE SC 35

ZF 8HP75 automatic/ 2.9 V6 RWD

engine) [UK gal / litres]

2.01 (9.11)

–

TUTELA TRANSMISSION AS 8

Automatic/ 2.0 T4 MAir engine) [UK

gal / litres]

–

2.07 (9.4) (RWD versions)

2.06 (9.3) (AWD versions)

255

2.9 V6

2.0 T4 MAir

Prescribed fuels and original

lubricants

Differentials and reduction gears

RDU 230-TV [UK gal / litres]

Main body: 0.18 (0.8)

Left TV: 0.11 (0.5)

Right TV: 0.13 (0.6)

–

TUTELA TRANSMISSION AXLE-

DRIVE (2.9 V6 RWD engine)

RDU 230-LSD differential [UK gal /

litres]

–

0.2 (0.9)

TUTELA TRANSMISSION LS AXLE

FLUID (2.0 T4 MAir engine)

RDU 210-eLSD differential (where

available) [UK gal / litres]

–

0.31 (1.4)

RDU 210/215-LSD differential [UK

gal / litres]

–

0.24 (1.1)

AWD System FAD transfer case

[UK gal / litres]

–

0.11 (0.5)

TUTELA TRANSMISSION

HYPOIDE GEAR OIL (2.0 T4 MAir

engine)

AWD System TRANSFER CASE [UK

gal / litres]

–

0.15 (0.7)

TUTELA TRANSMISSION

TRANSFER CASE (2.0 T4 MAir

engine)

(*) For particularly harsh climate conditions, a mixture of 60% PARAFLU UP and 40% demineralised water is recommended.

TECHNICAL SPECIFICATIONS

256

103) 104)

2.2 JTD

Prescribed fuels and original lubricants

Fuel tank [UK gal / litres]

11.4 (52)

Automotive diesel fuel (EN590 and EN16734

specifications)

including a reserve of [UK gal / litres]

1.76 (8.0)

AdBlue® tank (where provided) capacity

approximately [UK gal (litres)]

3.5 (16.1)

AdBlue® (DIN 70 070 and ISO 22241-1

specifications)

Main cooling system [UK gal / litres]

1.92 (8.75) (**) /

1.96 (8.9) (***)

50% mixture of distilled water and

PARAFLU UP (*)

Secondary cooling system [UK gal / litres]

1.16 (5.3) (***)

Engine oil filter [UK gal / litres]

0.11 (0.5)

SELENIA W.R. FORWARD 0W-20

Engine oil sump [UK gal / litres]

0.68 (3.1) (RWD) / 0.85 (3.9) (AWD)

Hydraulic brake circuit [UK gal / litres]

0.2 (0.9)

TUTELA BRAKE FLUID EXTREME HT

Windscreen washer tank [UK gal / litres]

0.92 (4.2)

PETRONAS DURANCE SC 35

Automatic transmission (engine 2.2 JTD 160/

190 HP RWD) [UK gal / litres]

2.02 (9.2)

TUTELA TRANSMISSION AS8

Automatic transmission (engine 2.2 JTD 210 HP

AWD) [UK gal / litres]

2.0 (9.1)

RDU 230-LSD differential [UK gal / litres]

0.2 (0.9)

TUTELA TRANSMISSION LS AXLE FLUID

RDU 210-eLSD differential (where provided)

[litres]

0.31 (1.4)

RDU 210/215-LSD differential [UK gal / litres]

0.24 (1.1)

257

2.2 JTD

Prescribed fuels and original lubricants

AWD System FAD transfer case [UK gal / litres]

0.11 (0.5)

TUTELA TRANSMISSION HYPOIDE GEAR OIL

AWD System TRANSFER CASE [UK gal / litres]

0.15 (0.7)

TUTELA TRANSMISSION TRANSFER CASE

(*) For particularly harsh climate conditions, a mixture of 60% PARAFLU UP and 40% demineralised water is recommended.
(**) 160 HP/190 HP RWD engines
(***) 210 HP AWD engine

IMPORTANT

103)

Only use AdBlue® (UREA) compliant with DIN 70 070 and ISO 22241-1. Other fluids may cause damage to the system: also exhaust emissions

would no longer comply with the law.

104)

The distribution companies are responsible for the compliance of their product. Observe the precautions of storage and servicing, in order to

preserve the initial qualities. The manufacturer will not recognise any guarantee in case of malfunctions and damage caused to the car due to the
use of AdBlue® (UREA) not in accordance with regulations.