Alfa Romeo Giulia GTA (2022 year). Manual in english — page 12
MULTIMEDIA
192
162
12126S0937EM
Bluetooth® SOURCE
Bluetooth® ACTIVATION
This mode is activated by pairing a
Bluetooth
® device containing music
tracks with the system.
PAIRING A Bluetooth® AUDIO DEVICE
Proceed as follows:
activate the
Bluetooth
® function on
the device;
open the main menu by pressing
button
and select “Settings”;
select “Infotainment”;
select "Phone" and then "Bluetooth
Settings";
select the
Bluetooth
® fig. 163 device;
select "Add Device" ;
search for the Connect system on the
Bluetooth
® audio device (during pairing,
a screen will appear on the display
showing the progress of the operation);
select the device to be paired;
when requested by the audio device,
enter the PIN code shown on the system
display or confirm on the device the PIN
displayed;
if the pairing procedure is completed
successfully, a dedicated screen will
appear;
163
12126S0430EM
The
Bluetooth
® function can also be
reached by pressing the "OPTIONS"
button in the "PHONE" or "MEDIA
functions", which can be selected on the
main menu.
WARNING If the
Bluetooth
® connection
between mobile phone and system is
lost, consult the mobile phone handbook.
USB/iPod/AUX SUPPORT
USB/iPod MODE
To activate the USB/iPod mode insert
the corresponding device (USB or iPod)
in one of the USB ports located:
underneath the automatic dual-zone
climate control panel, 1 fig. 164;
inside the glove compartment
underneath the front armrest, 2 fig. 165.
NOTE The Connect system may not
support some USB keys: in this case,
it may not automatically switch from
“Radio” mode to “Media” mode. If the
device used does not play, verify its
compatibility by selecting “Media” mode:
a dedicated message will appear on the
Connect system display.
WARNING After using a USB recharging
socket, we recommend disconnecting
the device (smartphone), always
removing the cable from the vehicle
socket first, never from the device.
Cables left flying or connected
incorrectly could compromise correct
recharging and/or the USB socket
condition.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
193
164
04026S0981EM
165
04026S0993EM
USB socket (battery charger)
The glove compartment underneath the
front armrest also contains a third USB
socket 3 fig. 165 for use as a "battery
charger" only.
AUX SOURCE
To activate AUX mode, insert an
appropriate device in the AUX socket 1
fig. 166 on the car.
When a device is connected to that
socket, the system starts reproducing
the connected AUX source, if it is already
playing.
166
04026S0982EM
CLIMATE CONTROL SYSTEM
The Connect system lets you interact
with the automatic dual-zone
climate control system to adjust the
temperature inside the passenger
compartment.
NOTE The climate control widget is only
active via the touchscreen function.
The Climate Control System widget
in the Main Menu can display the “Air”
content fig. 167.
Scroll up/down on the widget
to change
the display.
Press the widget
to activate the “Air”
screen.
167
12126S0970EM
On the climate control system widget
is displayed a single graphic button
(activated only using the touchscreen
function) which, if pressed, allows you to
turn off the automatic dial-zone climate
control system and then turn it back on
in its last active configuration before
turning off.
"AIR" SCREEN
The "Air" screen can be used to adjust the
air temperature on driver and passenger
side.
Graphic buttons are present on the
screen for activating the same functions
which can be selected using the buttons
on the display of the automatic dual-zone
climate control system located in the
passenger compartment (see "Climate
control system" paragraph in the
"Knowing your car" chapter).
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
194
PHONE MODE
NOTE Some "TELEPHONE" mode
functions can be activated in addition
to using the Rotary Pad and/or the
touchscreen function, also using voice
controls: for more information, see
the "Phone voice controls" paragraph
in the "Voice controls" section in this
publication.
INDICATIONS ON THE DISPLAY
The “PHONE” mode widget appears on
the main menu.
The widget display vary according to the
following conditions:
Paired mobile phone
No paired mobile phone
Phone call in progress
Multiple phone call in progress
Outgoing telephone call
Phone conference in progress
Paired mobile phone
If you have already paired your mobile
phone (see the following pages), the
following three graphic buttons fig. 168
will appear on the "PHONE" widget:
Turn the microphone on/off during
a phone call (1);
End call (2);
Transfer call to device (3).
168
12126S0417EM
PAIRING A MOBILE PHONE
Pairing procedure
To pair the mobile phone, proceed as
follows:
activate the
Bluetooth
® function on
the device;
in the main menu, select the
"SETTINGS" function by turning and
pressing the Rotary Pad;
select "Infotainment";
select the
Bluetooth
® device;
select "Add Device";
search for the Connect system on the
Bluetooth
® audio device (during the
pairing stage a screen will appear on
the display showing the progress of the
operation);
select the device to be paired;
when requested by the device, enter
the PIN code shown on the system
display or confirm the PIN displayed on
the device;
if the pairing procedure is completed
successfully, a screen is displayed;
the
Bluetooth
® function can also be
activated by pressing the
"PHONE"
or "MEDIA" functions, which can be
selected from the main menu.
WARNING Perform the telephone pairing
operation only while the car is stationary
and in safe conditions. Only do this with
the car stationary and in safe conditions.
The feature is disabled when the car is
moving faster than 5 km/h.
WARNING If the
Bluetooth
® connection
between mobile phone and system is lost
consult the mobile phone handbook.
MAKING A PHONE CALL
With the "PHONE" function on, you can
make a call in the following ways:
by selecting "Phone Book" on the
display or "Recent Calls" and then
selecting a contact from the suggested
list;
or
-------------------------------------------------------------------------------------------------------------------------------------------------------------
195
by selecting "Dial" item on the display.
MAIN PHONE MENU
When a mobile phone is connected to
the Connect system, various items (if
available) will appear on the main menu
fig. 169:
network signal intensity;
mobile phone battery charge;
mobile phone name.
169
12126S0421EM
The other information shown on the
display is:
"Dial" (1 fig. 169): press this graphic
button to show the "dial number" screen
on the display which can be used to dial
the telephone.
"Recent calls" (2 fig. fig. 169): press
this graphic button to choose between
"All Calls" and "Missed Calls".
"Favourites" (3 fig. fig. 169):
press this graphic button you can
choose between "Edit favourites", "Add
favourites", "Reorder favourites" and
"Delete favourites".
"SMS" (4 fig. fig. 169): press this
graphic button to receive and send text
messages (if supported by the device).
The car must be stationary to read the
messages. The listening function and
the sending of default messages which
can be customised by the driver is
always possible. If an unread message is
present, it is indicated by a dot next to
the "SMS" graphic button (a maximum
of 99 unread text messages can be
present).
"Contacts" (5 fig. fig. 169): press
this graphic button on the display to
show the list of all contacts registered
on the phone. When you select a contact,
the phone number and the photo (if any)
linked to the contact appear on the right
of the display.
NAVIGATION MODE
(where provided)
LEGAL/ SAFETY NOTICE
When Connect is used for the first time,
after resetting the default settings
and having changed the language,
the system will ask you to accept a
safety/legal notice, warning you about
the responsibilities involved in the
product use while navigating.
NOTE Some "NAVIGATION" mode
functions can be activated in addition
to using the Rotary Pad and/or the
touchscreen function, also using voice
controls: for more information, see
the "Navigation controls" paragraph
in the "Voice controls" section in this
publication.
NAVIGATION ACTIVATION
The “NAVIGATION” mode widget fig. 170
appears on the main menu.
NOTE The widget is only active using the
touchscreen function.
The graphic button on the widget varies
depending on whether navigation has
been activated
or is not activated .
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
196
170
12126S2010EM
SETTING A DESTINATION
The following data are required to set a
destination:
"City/Post code": enter the name
or ZIP code of the city of the new
destination arrival point;
"Address": enter the street name of
the new destination;
"House Number": enter the house
number of the new destination;
"State" (where applicable/necessary):
enter the name of the state of the new
destination arrival point.
"Start Navigation": select the desired
destination using the right side of the
display. This will provide access to the
route planning screen to start navigating.
NOTE The data above can be order
entered in any order ("Free Text Search"
function).
To set a new destination, select
the graphic button
(using the
"touchscreen" function or by rotating
the Rotary Pad): the graphic keyboard
for entering the destination address will
appear on the display and the list of
"Destinations" will appear on the right
side.
Management of voice recognition for
entering navigation addresses
Pressing the button
on the right
side of the steering wheel to start the
voice recognition session and send the
necessary commands to the Connect
system to enter a navigation address.
You can enter addresses in two different
ways:
One-shot
: Say "Navigate to <City,
Address, House Number>" after pressing
the button
on the right side of the
steering wheel and starting the voice
recognition session. The Connect system
will be able to recognise the address
you inserted or display a list of possible
alternatives. Then follow the instructions
provided by the Connect system to start
route calculation.
Manual entry
: The Connect system will
help you entry individual fields through a
guided procedure, with the possibility of
using the "City", "Address" and "House
Number" voice commands. To activate
this mode, press the button
located
on the right side of the steering wheel
and starting the voice recognition
session, send the first command to
enter the city and continue following the
instructions provided by the Connect
system.
If a language change is made on the
Connect system, using the dedicated
menu in the "Settings" on the display, a
pop-up screen will appear informing the
driver of the limited availability of the
voice recognition functions.
If you choose the English language on a
car sold in Italy the following message
will appear on the display of the Connect
system: "When the vocal system is set
to English you can input addresses
in the United Kingdom, Ireland, Malta
and Gibraltar. You can also insert all
destinations manually.".
WARNING The above message is located
according to the country of destination
of the vehicle. Only the countries shown
on this pop-up screen will be available
with voice recognition functions for
address and destination selection. The
available countries will change according
to the language type selected by the
driver.
NOTE The "one-shot" address entry
mode will not be available if the driver
chooses a language other than the one
used in the country in which the car was
marketed. In this case, in order to access
the voice recognition functions and enter
a valid address, i.e. recognisable by the
-------------------------------------------------------------------------------------------------------------------------------------------------------------
197
Connect system, you will need to send to
the Connect system a voice command to
change country in advance (for each use
of the car). For example, if you choose
English language on a car sold in Italy,
you will need to use the voice command
"Change country" to start the address
entry procedure.
STOPPING NAVIGATION
After starting the navigation, it can be
stopped at any moment.
To deactivate navigation, press the
graphic button
The display will show a dedicated
message. Select “Confirm” to confirm
the choice, or “Cancel” to cancel the
operation.
If “Confirm” is selected, the display will
return to the main navigation screen.
Tom Tom® ONLINE SERVICES
(where provided)
Tom Tom® "Online Services" (where
provided) allow you to receive the
following information and view on the
Connect system display:
"Live Traffic"/"Speed Cameras";
"Send Destination to car";
"Search for a point of interest (POI)
online"
"Last Mile Navigation".
NOTE Tom Tom® online services are
available if Connected Services - Alfa
Connect Services is activated and for the
entire duration, plus any renewals, of the
"My Navigation" package.
LIVE TRAFFIC / SPEED CAMERAS
(where provided)
With this service you can view the
relevant information on the display of
the Connect system:
traffic (conditions updated in real-
time);
the presence of speed cameras (if any).
Live Traffic
With this service, you can monitor, the
traffic conditions in real-time on the
display of the Connect system. The
information is displayed by means of
special icons with the following colours
fig. 171:
GREEN
: Roads where the average
traffic speed corresponds to the
expected free flow speed;
YELLOW
: Roads where the average
speed is below the indicated road speed
limit;
RED
: Roads where the average speed
is close to blocked traffic conditions;
RED + DANGER SIGN
: Roads blocked,
due to the presence of construction
sites, accidents, etc.
171
12126S2300EM
Speed Cameras
(where provided)
With this service, you can see on the
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
198
display the type (fixed or mobile) and
location of the speed cameras.
The display shows a speed camera icon
on the right-hand side.
If you press on the icon on the display
you will see a screen with the following
information about the speed cameras
fig. 172:
"Position" (e.g. "Both sides");
"Report Now."
172
12126S2132EM
Send Destination to car
Using this service, you can navigate to a
second destination sent to Connect via
your smartphone.
The new destination will appear in
the lower area of the display; to start
navigation, press the "Start Navigation"
graphic button fig. 173:
with destination NOT set
: the new
destination will be displayed in the
"Recent Destinations" menu;
with destination set
: the new
destination will be displayed in the
"Manage Route" menu. To access the
new destination press the "Add New
Destination" graphic button.
173
12126S2135EM
SEARCH FOR A POINT OF INTEREST
(POI) ONLINE
Using this service, you can enter a
destination (by entering the name,
address or a POI) and a list of POIs that
match your search will appear on the
display.
NOTE A subscription and authorisation is
needed to use this service.
LAST MILE NAVIGATION
With this service you can transfer
navigation from the Connect system to
your smartphone.
When navigation is active, the Connect
system will transfer navigation to your
smartphone as follows:
automatically
by activating the
"Automatic sending Last Mile to mobile"
option in the "Settings" menu;
at the driver's request
by activating
the "Send Last Mile Navigation" option
in the "Manage Route" menu or in the
"Settings" menu;
at the driver's request
if, during
navigation, you touch a point on the Map
and then select the "Send Last Mile
Navigation" option on the pop-up menu
that appears on the display.
Transferring Navigation to your
smartphone
With active navigation, proceed as
follows:
press the graphic button
("Manage
Route"): the "Manage Route" menu will
appear on the display;
select the "Last Mile Navigation" item;
select the "Send Now Last Mile
Navigation" item: the display will show a
dedicated message indicating that the
navigation will be transferred to the
smartphone. Then press the "OK" graphic
button to confirm the selection.
NOTE The final destination will be sent
to the smartphone even if the car is not
in a 1 kilometre (or 1 mile) radius from the
final destination.
NOTE The transfer to the smartphone
will take place even if you have not
enabled the "Automatic sending Last
-------------------------------------------------------------------------------------------------------------------------------------------------------------
199
Mile to mobile" feature in the "Settings"
menu (the navigation will be transferred
by selecting the "Send Last Mile
Navigation" option ).
SETTINGS
ACTIVATING THE SETTINGS MENU
The "Settings" menu can be activated by
using the appropriate widget on the main
menu fig. 174.
The following items are available in the
menu:
"Lights"
"Units & Language"
"Clock & Date"
"Passive Safety"
"Convenience & Comfort"
"Doors & Locks"
"Cluster"
"Infotainment"
"System"
174
12126S2000EM
Lights
The following settings can be modified
when this mode is selected:
"Headlight Sensor"
"Follow Me"
"Cornering Lights"
"Flash Lights with Lock"
"Daytime Running Lights"
"Courtesy Lights"
"Interior Ambient Lighting"
"Restore Settings"
Units & Language
The following settings can be modified
when this mode is selected:
"Units"
"Language"
"Restore Settings"
Clock and Date
The following settings can be modified
when this mode is selected:
"Sync with Gps Time"
"Set Time"
"Set Date"
"Time Format"
"Restore Clock and Date Settings"
Passive safety
The following settings can be modified
when this mode is selected:
"Passenger airbag": this is used to
activate/deactivate the front passenger
airbag function.
When the function is accessed:
the system will detect the
activation/deactivation status of the
airbags and confirm change of status.
Press the Rotary Pad to continue. The air
bag status is visible through the LEDs
next to the status icon on the dashboard.
Passenger protection activated
:
the ON LED switches on with a
steady light.
Passenger protection
deactivated
: the OFF LED switches
on with a steady light.
Auto Park Brake: allows you to
activate/deactivate electric parking
brake engagement when the engine is
stopped.
“Brake Service”: used to enable ("Yes")
or disable ("No") the procedure for
performing maintenance on the braking
system.
"Seat Belt Reminder” (where
provided): this is used to enable ("OK") or
disable ("Cancel") the acoustic warning
for the SBA (Seat Belt Alert) system
(where provided).
"Automatic mirror folding"
(where provided): This function
activates/deactivates automatic folding
of the mirrors when the doors are
locked/unlocked. The default setting is
"Off".
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
200
“Restore Settings”: allows you to
delete the previously settings from this
menu and restore the default settings.
Convenience & Comfort
The following settings can be modified
when this mode is selected:
“Passive Entry" (where provided):
allows you to activate ("On") or
deactivate ("Off") the automatic door
closing
“Restore Settings”: allows you to
delete the previously settings from this
menu and restore the default settings.
Doors & Locks
The following settings can be modified
when this mode is selected:
"Door lock in motion"
"Unlock all doors on exit"
"Door unlock on entry" (where
provided)
"Sound Horn with Remote Start"
(where provided)
"Sound Horn with lock" (where
provided)
"Auto Relock" (where provided)
"Convenience & Comfort"
"Restore Settings"
Cluster
The following settings can be modified
when this mode is selected:
"Buzzer volume"
"Trip B"
"Show Phone Info"
"Show Audio Info"
"Show Nav Info"
"Digital speed on all screens"
"Consumption bar"
"Performance pages"
"Custom areas"
"Restore Settings"
Infotainment
The following settings can be modified
when this mode is selected:
"Screen Off"
"Display brightness"
"Audio"
"Home Page"
"Bluetooth®"
"Device Manager"
"Entertainment"
"Phone"
"Projection mode"
"Navigation"
"Performance Pages"
"Android Auto"
"Connected Services" (where
provided)
"Driver Assistance"
System
The following settings can be modified
when this mode is selected:
"Auto-On Radio"
"Switch-Off Delay"
"Software Update"
"Map Update"
"Restore All Settings"
MAP UPDATE
To ensure optimal performance, the
navigation system must be updated
periodically.
For this, the
Mopar® Map Care
service
offers a new map update every three
months.
The updates can be downloaded from the
maps.mopar.eu website and installed
directly on the Connect system. All
updates are free of charge for 3 years
from the start of the warranty on the car.
The navigation system can also be
updated at the Dedicated Alfa Romeo
Dealership.
NOTE The dealer may charge for
updating the navigation system.
Map update procedure
Proceed as follows to update the
navigation maps:
start the engine;
with the car stationary, insert the USB
key, containing the updated maps, into
one of the USB ports located on the
central tunnel;
-------------------------------------------------------------------------------------------------------------------------------------------------------------
201
select the "Update Map" option from
within the "Map Update" function. The
display will show a screen with the
version and the duration of the whole
procedure in minutes;
select the "Update" function. The
display will show a screen with the
instructions to be followed and a request
for confirmation;
confirm to start the process.
During the update, the instructions to be
followed will continue to be displayed
together with the process progress. You
can move the car during this phase.
PERFORMANCE
The "Performance pages" can be
activated by using the appropriate
widget on the main menu fig. 175.
The following information is shown on
the main screen of the "Performance
pages":
“Performance content”
"Technical gauges"
"Consumption history"
"Efficient Drive"
“Torque management”
"Drag Race"
Turn the Rotary Pad to select the desired
item and then press the Rotary Pad to
confirm the selection and access the
menu or, using the touchscreen function,
touch the display to select the desired
item.
175
12126S0400EM
VEHICLE INFORMATION
The "Vehicle Information" function can
be activated by using the appropriate
widget on the Main Menu fig. 176.
The main screen shows information
about:
Service (scheduled servicing)
TPMS (Tyre Pressure Monitoring
System)
Engine oil level
Alfa DNA™ system
To view the contents of one of the
information on the display, press on the
display (touchscreen function) or turn the
Rotary Pad, select the desired item and
then press the Rotary Pad to confirm
your selection.
176
12126S0994EM
DRIVER ASSISTANCE
The Connect system main Menu contains
the “Driver Assistance” widget fig. 177,
within which information concerning the
following drive assistance systems is
shown on the display:
Speed Limiter
Park Sensors System
Rear View Camera
Select the Menu by sliding on the widget
upwards or downwards with a finger.
177
12126S0431EM
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
202
Indications on the display
Each driver assistance system is
represented by a corresponding icon on
the display.
The status of the function is displayed
next to the icon: "On" = system activated
/ "Off" = system deactivated.
Settings are possible on some systems
(if activated), (e.g. the speed limit value
can be adjusted on the Speed Limiter
function).
SYSTEM SETTINGS
After viewing the "Driver Assistance"
menu in full screen mode, a list of all
settings that can be made for driver
assistance systems will appear on the
display.
The information shown on the display is
as follows:
system identification icon;
system name;
graphic button 1 fig. 178 for activating
("On") and deactivating ("Off"") the
system;
indication of the function status;
graphic display area of the system;
default system setting (modifiable by
the driver).
The following active driver
assistance/safety systems will not be
available if you have selected the "RACE"
driving mode. In this case, a dedicated
pop-up screen will appear on the Connect
system display.
178
12126S2034EM
SYSTEM ACTIVATION/DEACTIVATION
Using the touchscreen function
Proceed as follows:
press the display to select the desired
item;
to activate the system, press the
graphic button 1 fig. 178 rightwards: "ON"
will appear on the display
to deactivate the system, press the
graphic button 1 fig. 178 leftwards: "OFF"
will appear on the display.
Using the controls located on the
central tunnel
Proceed as follows:
turn the Rotary Pad and select the
desired item;
press on Rotary Pad to confirm
the choice and activate the system:
the selected item will be activated
automatically. When the system is
activated, press the Rotary Pad to
deactivate it.
Apple CarPlay and Android Auto
(where provided)
The Apple CarPlay and Android Auto
applications allow you to use your
smartphone in the car safely and
intuitively.
To activate them, simply connect a
compatible smartphone to the USB
port and the contents of the phone will
automatically appear on the display
of the Connect system after having
selected the default action the first time
you connect an Android and/or an iOS
device. Use the "Device Manager" menu
to change the choice previously made.
To check the compatibility
of your smartphone, see the
indications on the websites:
https://www.android.com/intl/it_it/auto/
and http://www.apple.com/it/ios/carplay/.
The first time a device is connected, a
pop-up screen appears on the Connect
system display, allowing you to choose
which profile to use it with during
subsequent connections. The possible
options are: “Charge Only”, “Media/iPod”,
“Projection mode”. The options can be
modified by using the "Device Manager"
menu.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
203
If your smartphone is properly connected
to the car via the USB port, an additional
widget and its graphic icon will be
displayed on the Connect System Main
Menu on the left hand side of the status
bar.
To use Apple CarPlay, connect your
iPhone to the car using a MFI (made for
iPhone) certified USB cable.
To use Android Auto, connect your
smartphone to the car using a USB for
Android phones having appropriate
features. Using unsuitable cables may
prevent correct system operation.
NOTE Interaction with the smartphone
may be needed to enable Apple
Carplay/Android Auto and some other
functions. Complete the action on your
device (smartphone) as needed.
APP CONFIGURATION (Apple CarPlay)
Apple CarPlay is compatible with the
iPhone 5 or more recent models, with
the iOS 7.1 operating system or later
versions.
In order to use Siri in Apple CarPlay, you
must activate the function from your
smartphone settings.
To use Apple CarPlay, the smartphone
must be connected to the car by means
of a USB cable.
APP CONFIGURATION (Android Auto)
Before use, download the Android Auto
application to your smartphone from
Google Play Store.
The application is compatible with
Android 5.0 (Lollipop) and later versions.
To use Android Auto, the smartphone
must be connected to the car by means
of a USB cable.
INTERACTION
After the configuration procedure, when
you connect your smartphone to the
USB port on the car, after displaying the
pop-up screen and according to the last
setting made on the "Device Manager"
menu, the application will automatically
start on the Connect system.
The Rotary Pad can be used to select
and confirm the available smartphone
functions.
Multimedia contents on the smartphone
can be accessed directly via "MEDIA"
mode of Connect.
Interaction with voice controls
You can interact with the voice
assistants of Apple CarPlay and Android
Auto using the button
located on the
right side of the steering wheel:
long pressure
will activate interaction
with the voice assistant of Apple (Siri) or
Android (Google Assistant);
short pressure
will initiate interaction
with the native voice system. When
the voice assistant of the phone is
activated, the interface will but that of
the associated telephone not that of the
car. A short press will interrupt both the
native voice session and that of Siri or
Google Assistant.
WARNING If Apple CarPlay and
Android Auto apps are present, Siri
voice assistant (for Apple CarPlay) or
Google Assistant (for Android Auto) will
be activated. In this case you can use
"Natural language" voice controls and
not just the specific ones preset for the
Connect system. The voice assistants
of Siri (for Apple CarPlay) or Google
Assistant (for Android Auto) will only
be activated by holding the button
pressed on the right side of the steering
wheel.
Active Media or Phone mode
The following will be activated according
to how you press the button
on the
right side of the steering wheel:
a
short
press of the button
will
activate the voice control related to the
Connect system;
holding
the button
pressed to
activate the voice control for the phone
in "Projection" mode.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
204
Briefly pressing the button
on the
right side of the steering wheel on the
Connect system display to activates
the voice control for "Tuner (Radio)" or
"Navigation" mode, also when Apple
CarPlay or Android Auto apps are
activated.
NAVIGATION
With the Apple CarPlay and Android Auto
applications, you can choose to use the
navigation system on your smartphone.
The controls can be imparted directly on
the Connect system.
The user can choose to change their
selection at any time by accessing the
navigation system that they want to use
and setting a new destination.
EXITING FROM THE Apple CarPlay AND
Android Auto APPS
To end the Apple CarPlay or Android
Auto session, physically disconnect the
smartphone from the USB port on the
car.
VOICE COMMANDS
160)
WARNING Voice commands are not
available for languages not supported by
the system.
NOTE Voice controls activation is only
possible with the ignition device at ON.
Voice controls will not be active when
the starter is in the OFF position and the
Connect system is on.
NOTE If Apple CarPlay and Android Auto
apps are present, Siri voice assistant
(for Apple CarPlay) or Google Assistant
(for Android Auto) will be activated. In
this case you can use "Natural language"
voice controls and not just the specific
ones preset for the Connect system.
The voice assistants of Siri (for Apple
CarPlay) or Google Assistant (for
Android Auto) will only be activated by
holding the button
pressed on the
right side of the steering wheel.
STARTING A VOICE SESSION
Briefly press
the button
on the
steering wheel once.
INTERRUPTING A VOICE SESSION
At any time during a voice session
(dialogue), you can press and hold the
button to stop and restart the voice
session from scratch and impart a new
command, regardless of the previous
conversation.
For example, if the system is uttering
a voice help message and recognises
the desired command, it may be useful
to stop the help by pressing the button
on the steering wheel and give the
command, so you don't have to wait for
the help messages to end.
DEACTIVATING A VOICE SESSION
With the voice session active,
briefly
press
the button
on steering wheel.
The voice session will automatically
close when a command has been
recognised and no further actions are
required by the driver.
A phone call will also interrupt the voice
session, in order to allow you to answer
and speak normally using the hands-free
function.
RADIO AM/FM/DAB VOICE CONTROLS
The
button activates the following
functions:
Tune to station <XXX>
Tune to station < XXX>
Tune to frequency < XXX>
Tune to frequency < XXX>
Add to favourites
Show available stations
Show list of available stations
Show Favourite Stations
Show the list of favourites stations
Active Tuner (Radio) or Navigation
mode
-------------------------------------------------------------------------------------------------------------------------------------------------------------
205
FM
AM
DAB
Tuner Commands ("Go to radio")
MEDIA VOICE COMMANDS
The
button activates the following
functions:
Play (or say View) Album
Play (or say View) Artist
Play (or say View) Composer
Play (or say View) Genre
Play (or say View) Playlists
Play (or say View) Song
Play (or say View) All
Shuffle on
Shuffle off
Play Song (or Track)
Play All (or say View All) Albums
Play All (or say View All) Artists
Play All (or say View All) Composers
Play All (or say View All) Genres
Play All (or say View All) Playlists
Change to AUX
Pass to USB 1
Pass to USB 2
Pass to USB 3
Change to AUX
Change Bluetooth®
NOTE These controls are valid on
devices connected to the system via USB
ports and not through the
Bluetooth®
system.
PHONE VOICE COMMANDS
The
button activates the following
functions:
Dial number <XXXXXX>
Call <XXXXXX>
Go (or say Change to phone)
Phone commands
Search contact
Search
Call back
Show missed calls
All Calls
Show contacts
View contacts
Show all messages
Send a message
Send a message to
Read last (or say Read the last)
message
NAVIGATION COMMANDS
(where provided)
The
button activates the following
functions:
Go (or say Drive) Home
Favourite <favourite name>
Navigation commands
Go (or say Change) to Navigation
Set 2D map
Set detailed 3D map
Set overhead view
Add destination
Destination
Stop Navigation
Repeat instructions
Show map
Enter city
Enter nation
Enter country
Enter street
Enter house number
Route preview
Find the closest <point of interest>
NOTE Voice entry of addresses is only
supported in the country in which you are
located and provided that the system
language matches the local language.
For example, if the car is located in
Italy, it will be possible to enter Italian
addresses only if the system language is
set to "Italian".
WARNING
160)
Voice controls must always be given in
safe driving conditions, in compliance with
the laws in force in the country where you
are driving.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
206
CONNECTED SERVICES - ALFA
CONNECT SERVICES
(for versions/markets where provided)
161)
Alfa Connected Services enrich
the experience of use of the car by
connecting it to the network.
The services (where provided) allow
you to receive timely assistance in
case of need and emergency, to obtain
information about the conditions of
your vehicle, its location, control it
remotely and to improve the navigation
experience (where provided) through
real-time updates.
You can access the Alfa Connect
Services using a Alfa Connect mobile app
for smartphone, smart watch, web portal
or the Connect system of your car.
The availability of services is subject to a
Alfa Connect Services subscription.
More information on Alfa
Connect Services (applicability,
availability, compatibility,
packages and specifications)
can be found on the website:
https://myalfaconnect.alfaromeo.com/
GENERAL DISCLAIMER
Personal data & customization
FCA collects, processes and
uses the personal data of the car in
accordance with legal requirements.
More information can be found in the
general conditions of service and on data
protection policies on the Alfa Romeo
official website.
The Customer is solely responsible
for using the services in the vehicle, even
if by other people, and shall inform all
users and occupants of the car about the
services and the operations and limits of
the system.
If the SOS emergency service is
activated, the call will be automatically
routed to a private FCA Call Centre. We
hereby specify that, whenever the SOS
call is referred to the text, it is to be
considered managed by private service
providers
.
Operating prerequisites
To use some of the Alfa Connect
Services you need to register on the
dedicated portal that can be accessed
from the Alfa Romeo official website,
activate and login to your devices.
Alfa Connect Services is not
available in all countries and is subject
to limitations depending on Connect
system type, location and duration of the
services.
The full operation of the Alfa Connect
Services, including SOS calls and
roadside assistance calls (ASSIST), is
subject to mobile network and GPS
geolocation coverage, without which
the proper provision of services is
not guaranteed. Coverage may not be
guaranteed in places such as tunnels,
garages, multi-story parking garages,
mountains.
The services may be unavailable in
the event of mobile network overload
or problems related to the car power
source (e.g. low battery).
When using the services, customers
shall keep their passwords secret for
strictly personal use and not disclose
them to third parties.
SERVICES
WARNING Some of the services listed
below may not be available if the car is
left with the motor off for more than 20
days. Start the motor to reactivate these
services.
According on the equipment of the car
and of the country, different services
may be available for different durations.
For further information about your car,
go to the personal page on the official
Alfa Romeo website.
Some of the packages made available to
the customer are:
My Assistant
: Customer assistance
and safety warning service, which
includes:
"SOS emergency call and ASSIST
roadside assistance" (see chapter
"In emergency").
-------------------------------------------------------------------------------------------------------------------------------------------------------------
207
"Vehicle condition report":
information on the status and
condition of the car, notifying
potential maintenance needs to the
customer via periodic e-mails. This
service is provided on condition
that the Customer has previously
provided the FCA network with a
valid e-mail address.
"In-Vehicle Alerts (Basic)": to
receive messages and/or alerts
regarding recall campaigns or
other important messages on the
Connect system display. You can
contact FCA Customer Service for
further information regarding the
messages received.
My Car
: vehicle status monitoring
service.
"Driving Warnings": to set alerts
when user-defined parameters
such as speed, time and area are
exceeded, as well as the Valet
Mode feature.
"At-Home Digital Assistant": to
run the main remote commands
from a voice assistant as well as
mobile apps and smartwatches.
My Remote
: this can be used to
manage remote operations (switching
on lights, door lock/unlock, find vehicle,
etc.) from the mobile app and through
compatible voice assistants. It also
allows you to set up Driving Warnings
with notifications, for example, when you
exceed the set area or time.
My Navigation
: connected navigation
service (subject to availability according
to version/market).
My Wi-Fi
: Optional Wi-Fi Hotspot
service. This service provides Internet
access from the car to all devices with
Wi-Fi connection (smartphones, tablets,
laptops) (supported technologies: 3G –
4G). This creates a private Wi-Fi internet
access point in the car. The function,
available only with the ignition device in
ON position or with the engine started
allows the connection of up to eight
devices simultaneously, but not the
direct communication between devices.
The quality of the service offered by the
integrated Wi-Fi Hotspot depends on
the coverage of the mobile operator's
network.
NOTE The hotspot name and password
can only be changed with the starter in
the ON position.
My Theft Assistance:
optional service
with app and web notifications in case of
suspected theft attempts and assistance
in case of theft.
You can enrich Alfa Connect Services
experience by purchasing optional
services for which a subscription is
required.
The services can be subscribed to
independently by the customer
from the catalogue of services
available for the car, directly on the
https://myalfaconnect.alfaromeo.com/
website.
DEACTIVATION OF GEOLOCATION
MODE
(for versions/markets where provided)
If you wish to deactivate geolocation
mode, simply do so from the Connect
system fig. 179 (see the "Settings" menu
of the Connect system for more details).
When geolocation mode is deactivated
some of the services on mobile apps and
web that use the location of the car will
not be available.
WARNING The
icon is shown at the
bottom left of the Connect system
display when the geolocation function
is active (ON). When geolocation is on,
the vehicle position is tracked to enable
the functions that require it. When
geolocation is off, the vehicle position is
only tracked by the navigation, safety,
insurance and driver assistance systems
(where provided). See the Connect
system "Settings" chapter to deactivate
the function.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст