Citroen C4 Cactus (2016 year). Instruction — part 16
.
Audio and Telematics
239
Level 1
Level 2
Level 3
Comments
Media
Secondary page
Radio list
Save
Press a radio station to select it.
Update list
Update the list of stations received.
Frequency
Enter the desired radio frequency.
Confirm
Save the settings.
Media
Secondary page
Photos
Page selection
Display the selected photo full screen.
Rotate
Rotate the photo 90°.
Select all
Select all the photos in the list.
Press again to deselect.
Slideshow
Previous photo.
Display the photos in sequence, full screen.
Pause / Play.
Next photo.
Confirm
Save the settings.
Audio and Telematics
240
Level 1
Level 2
Level 3
Media
Settings
Settings
Settings
"Media"
Secondary page
.
Audio and Telematics
241
Level 1
Level 2
Level 3
Comments
Media
Secondary page
Media list
Presentation of the last media used.
Media
Secondary page
Settings
Media
Settings
Shuffle (all tracks)
Choose the play settings.
Shuffle (current album)
Repeat
Aux. amplification
Radio
Settings
RDS options
Activate or deactivate the options.
DAB/FM station tracking
Display Radio Text
Digital radio slideshow
display
Announcements
Settings
Traffic announcements (TA)
Activate or deactivate the options.
Weather
Sport - Programmes info
Alert settings
Confirm
Save the settings.
Audio and Telematics
242
Press on Media
to display the
primary page.
Press on Media
to display the
primary page then select "Save".
If necessary, select change of
source.
Press on Media
to display the
primary page.
By automatic frequency search
Select "Radio list
" in the secondary
page.
Select a preset radio station
in the list.
Select "FM Radio" or "AM Radio
".
Select a radio station from
the list offered.
Select "Update list" to refresh the
list.
Press on Media
to display the
primary page then go to the
secondary page.
Select "List
" in the primary page.
Radio
Changing a radio frequency
Selecting a station
OR
or
OR
The exterior environment (hills, buildings,
tunnel, car park, below ground...) may
prevent reception, even in RDS station
tracking mode. This phenomenon is
normal in the propagation of radio waves
and is in no way indicative of a fault with
the audio system.
or
Press 3 or 4
to move the cursor for an
automatic search down or up for a radio
frequency.
Press on Media
to display the
primary page then press on the
secondary page.
Press on "Enter frequency" to
display the primary page then press
on the secondary page.
.
Audio and Telematics
243
Select the change of source.
Select "FM Radio" or "AM Radio
".
Select a radio station or frequency
(refer to the corresponding section).
Press on Media
to display the
primary page then go to the
secondary page.
Select "Settings
".
Select "Radio
".
Activate/deactivate "RDS
options
".
Press on "Save
".
Select a number in the list to preset the
previously chosen radio station.
A long press on a number presets (memorises)
the station.
Enter the frequency in full (e.g.:
92.10 MHz) using the keypad then
"Confirm
".
By alphabetical list
Press the current radio band then choose the
radio station from the list offered.
Or
Press on Media
to display the
primary page then select "Save".
Preset a station
Activate/ Deactivate RDS
THEN
OR
A press on this button presets all of
the stations one after the other.
Recall preset stations
RDS, if activated, allows you to continue
listening to the same station by automatic
retuning to alternative frequencies.
However, in certain conditions, coverage
of an RDS station may not be assured
throughout the entire country as
radio stations do not cover 100% of
the territory. This explains the loss of
reception of the station during a journey.
Audio and Telematics
244
Display of options:
if active but not available, the display will be greyed out,
if active and available, the display will be blank.
Display of "Radiotext" for
the current station.
Select the audio source.
Display the "DAB" band.
Display of the name of the
current station.
Short-cut: access to the choice of audio source,
the list of stations (or titles depending on the
source) or temperature adjustment.
Select the radio station.
Any thumbnail broadcast by
the station.
Preset stations,
buttons 1 to 15.
Short press: select the
preset radio station.
Long press: preset a radio
station.
Next "Multiplex".
Next radio station.
Secondary page.
Display the name and
number of the multiplex
service being used.
Previous "Multiplex".
Previous radio station.
DAB (Digital Audio Broadcasting) radio
If the "DAB" radio station being listened to is not
available on "FM", the "DAB FM" option is greyed out.
Journaline
®
is a text-based information service designed for digital radio systems.
It provides text-based information structured around topics and sub-topics.
This service is available from the "LIST OF DAB STATIONS" page.
.
Audio and Telematics
245
Select change of source.
Press on Media
to display the
primary page.
Select "DAB Radio
".
Select "List
" in the primary page.
Select the radio station from the list offered.
Press Media
to display the primary
page then press on the secondary
page.
Select "Settings
".
Select "Radio
".
Select "Digital/FM auto
tracking" then "Confirm
".
Digital radio - DAB / FM
auto tracking
DAB
(Digital Audio Broadcasting)
Digital radio
"DAB" does not cover 100% of the
territory.
When the digital radio signal is weak,
"DAB/FM station tracking" allows you to
continue listening to the same station,
by automatically switching to the
corresponding "FM" analogue station
(if there is one).
If "DAB/FM station tracking" is
activated, there is a difference of a few
seconds when the system switches to
"FM" analogue radio with sometimes a
variation in volume.
When the digital signal is restored, the
system automatically changes back to
"DAB".
Digital radio provides higher quality
reception and also the graphical display
of current information on the radio
station being listened to. Select "List" in
the primary page.
The range of multiplexes available is
displayed in alphabetical order.
If the "DAB" station being listened to
is not available on "FM" ("DAB/FM"
option greyed out), or "DAB/FM station
tracking" is not activated, the sound
will cut out while the digital signal is too
weak.
or
Select "Radio list
" in the secondary
page.
Audio and Telematics
246
Music
USB player
Selecting the source
The steering mounted SRC (source)
button can be used to go to the next
media source, available if the source
is active.
Select change of source.
Press on Media
to display the
primary page.
The system builds playlists (in temporary
memory), an operation which can take from
a few seconds to several minutes at the first
connection.
Reduce the number of non-music files and the
number of folders to reduce the waiting time.
The playlists are updated every time the
ignition is switched off or connection of a USB
memory stick. The lists are memorised: if they
are not modified, the subsequent loading time
will be shorter.
Insert the USB memory stick into the USB port
or connect the USB device to the USB port
using a suitable cable (not supplied).
Auxiliary (AUX) socket
Connect the portable device (MP3 player…) to
the auxiliary Jack socket using an audio cable
(not supplied).
First adjust the volume of your portable device
(to a high level). Then adjust the volume of your
audio system.
Display and management of the controls are
via the portable device.
Choose the source.
Press OK
to confirm the selection.
.
Audio and Telematics
247
The audio equipment will only play audio
files with ".wma, .aac, .flac, .ogg and. mp3"
file extensions and with a bit rate of between
32 Kbps and 320 Kbps.
It also supports VBR (Variable Bit Rate) mode.
No other type of file (.mp4, ...) can be played.
WMA files must be of the standard wma 9 type.
The sampling rates supported are 11, 32, 44
and 48 KHz.
It is advisable to restrict file names to
20 characters, without using of special
characters (e.g.: " " ? ; ù) to avoid any playing
and displaying problems.
Information and advice
Use only USB memory sticks formatted FAT 32
(28-bit file allocation table).
The system supports USB mass
storage devices, BlackBerry
®
devices
or Apple
®
players via USB ports. The
adaptor cable not supplied.
Control of the peripheral device is with
the audio system controls.
Other peripherals, not recognised on
connection, must be connected to the
auxiliary socket using a Jack cable (not
supplied).
It is recommended that the USB cable
for the portable device is used.
The system does not support the
simultaneous connection of two
identical devices (two memory sticks,
two Apple
®
players) but it is possible
to connect one memory stick and one
Apple
®
player at the same time.
Audio and Telematics
248
Bluetooth
®
audio streaming
Streaming allows audio files on your telephone
to be played through the vehicle's spx`eakers.
Connect the telephone: see the "Telephone"
section, then "Bluetooth
".
Choose the "Audio" or "All
" profile.
If play does not start automatically, it may be
necessary to start the audio playback from the
telephone.
Control is from the peripheral device or by
using the audio system buttons.
Once connected in streaming mode,
the telephone is considered to be a
media source.
It is recommended that you activate
"Repeat
" on the Bluetooth peripheral.
Connecting Apple
®
players
Connect the Apple
®
player to the USB port
using a suitable cable (not supplied).
Play starts automatically.
Control is via the audio system.
The classifications available are those
of the portable device connected
(artists / albums / genres / playlists /
audiobooks / podcasts).
The default classification used is by
artist. To modify the classification used,
return to the first level of the menu
then select the desired classification
(playlists for example) and confirm
to go down through the menu to the
desired track.
The version of software in the audio system
may not be compatible with the generation of
your Apple
®
player.
Audio and Telematics
250
Level 1
Level 2
Level 3
Navigation
Navigation
Route settings
"Navigation"
Primary page
.
Audio and Telematics
251
Level 1
Level 2
Level 3
Comments
Navigation
Settings
Navigation
Enter destination
Display recent destinations.
Route settings
Fastest
Choose the navigation criteria.
The map displays the route chosen according to
these criteria.
Shortest
Time/distance
Ecological
Tolls
Ferries
Strict-Close
Show route on map
Display the map and start navigation.
Confirm
Save the options.
Save
Save the current address.
Stop navigation
Delete the navigation information.
Voice
Choose the volume for voice and announcement
of street names.
Diversion
Detour from your initial route by a certain
distance.
Navigation
Display in text mode.
Zoom in.
Zoom out.
Display in full screen mode.
Use the arrows to move the map.
Switch to 2D map.
Audio and Telematics
252
Level 1
Level 2
Level 3
To use the telephone functions,
refer to the "Telephone
" section.
For managing contacts and
their addresses, refer to the
"Telephone
" section.
Navigation
Address
Enter destination
Contacts
"Navigation"
Secondary page
.
Audio and Telematics
253
Level 1
Level 2
Level 3
Comments
Navigation
Secondary page
Enter destination
Address
Current loc.
Address settings
Point of interest
Town center
Save
Save the current address.
Add waypoint
Add a waypoint to the route.
Navigate to
Press to calculate the route.
Contacts
Addresses
Select a contact then calculate the route.
Add contact
Add waypoint
Search for contact
Navigate to
On the map
Display the map and zoom to view the roads.
Itinerary
Create, add or delete a waypoint or view the
itinerary.
Stop
Delete navigation information.
Navigate to
Press to calculate the route.
Audio and Telematics
254
Search for a point of interest
Navigation
Point of interest displayed on the map
Search for a POI by name
Level 1
Level 2
Level 3
"Navigation"
Secondary page
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст