Citroen C4 Picasso (2017 year). Instruction — part 20
303
8
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
Fitting the "space-saver"
spare wheel
If your vehicle is fitted with alloy wheels,
when tightening the bolts on fitting, it
is normal to notice that the washers
do not come into contact with the
"space-saver" spare wheel. The wheel
is secured by the conical surface of
each bolt.
After changing a wheel
To correctly store the punctured wheel
in the boot (not in the location for the
space-saver wheel
), first remove the
central cover.
When using the "space-saver" type
spare wheel, do not exceed 50 mph
(80 km/h).
Have the tightening of the bolts and the
pressure of the spare wheel checked
by a CITROËN dealer or a qualified
workshop without delay.
Have the punctured wheel repaired
and refitted to the vehicle as soon as
possible.
F
Tighten the security bolt using the
wheelbrace 1
fitted with the security
socket 5 (depending on equipment).
F
Tighten the other bolts using the
wheelbrace 1
only.
F
Refit the wheel bolt cover(s) (depending on
equipment).
F
Stow the tools in the box.
The tyre inflation pressures are given on this
label.
304
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
Changing a bulb
For H7 type bulbs with lugs... take care
to observe their correct installation
so as to ensure the best lighting
performance.
Risk of electrocution
Xenon bulbs (D5S-25W) must be
replaced by a CITROËN dealer or a
qualified workshop.
Front lamps
1.
Directional dipped beam headlamps
(D5S-25W).
2.
Main beam headlamps (H7-55W).
3.
Daytime running lamps / sidelamps
(6 light emitting diodes - LEDs).
4.
Direction indicators
(6 light emittng diodes - LEDs).
5.
Front foglamps (H11-55W).
1.
Dipped beam headlamps (H7-55W).
2.
Main beam headlamps (H7-55W).
3.
Daytime running lamps/sidelamps
(4 light emitting diodes - LEDs).
4.
Direction indicators (PWY24W).
5.
Foglamps (H11-55W).
In some weather conditions (e.g. low
temperature or humidity), the presence
of misting on the internal surface of the
glass of the headlamps and rear lamps
is normal; it disappears after the lamps
have been on for a few minutes.
Light-emitting diodes - LEDs
For replacement, contact a CITROËN dealer or
qualified workshop.
Model with xenon headlamps
Model with halogen headlamps
305
8
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
Directional dipped beam
headlamps (xenon model)
Main beam headlamps (xenon model)
F
Remove the protective plastic cover by
pulling the tab.
F
Push the connector.
F
Remove the bulb and change it.
For reassembly, carry out these operations in
reverse order.
D5S xenon bulbs must be changed
by a CITROËN dealer or a qualified
workshop, as there is a risk of
electrocution.
In the event of failure of one of
the D5S bulbs, it is recommended that
the bulb on the other side be changed
at the same time.
The headlamps have polycarbonate
lenses with a protective coating:
F do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,
F
use a sponge and soapy water or
a pH neutral product,
F
when using a high pressure washer
on persistent marks, do not keep
the lance directed towards the
lamps or their edges for too long,
so as not to damage their protective
coating and seals.
Changing a bulb should only be done
after the headlamp has been switched
off for several minutes (risk of serious
burns).
F
Do not touch the bulb directly with
your fingers, use a lint-free cloth.
It is imperative to use only anti-
ultraviolet (UV) type bulbs to avoid
damaging the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specification.
306
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
Dipped beam headlamps
(halogen model)
F
Remove the protective plastic cover by
pulling the tab.
F
Push the connector.
F
Remove the bulb and change it.
For reassembly, carry out these operations in
reverse order.
Main beam headlamps
(halogen model)
F Turn the protective plastic cover to
remove it.
F
Disconnect the connector.
F
Release the clips.
F
Remove the bulb and change it.
For reassembly, carry out these operations in
reverse order.
307
8
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
The direction indicator bulb is located below
the front lamp.
F
Turn the bulb holder a quarter turn anti-
clockwise.
F
Remove the bulb holder.
F
Change the failed bulb.
For reassembly, carry out these operations in
reverse order.
Direction indicators
Front foglamps
F
Unclip the finisher by pulling at the top.
F
Remove the two screws to remove the unit.
F
Turn the bulb holder a quarter turn.
F
Remove the bulb holder.
F
Change the failed bulb.
For reassembly, carry out these operations in
reverse order, pressing on the finisher to refit it.
Faster flashing of a direction indicator
warning lamp (left or right) indicates a
failed bulb on that side.
Direction indicators
(light-emitting diodes - LED)
For the replacement of this type of lamp,
contact a CITROËN dealer or a qualified
workshop.
308
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
You should contact a CITROËN dealer or a
qualified workshop for the replacement of the
light-emitting diode - LED.
Door mirror spotlamps
Integrated direction indicator
side repeaters
You should contact a CITROËN dealer or a
qualified workshop for the replacement of these
bulbs.
1.
Direction indicators (PY21W amber).
2.
Sidelamps / foglamps (P21/5W).
Rear lamps
Light-emitting diodes -
LEDs
For replacement, contact a CITROËN
dealer or qualified workshop.
3.
Brake lamps / sidelamps (light-emitting
diodes - LEDs).
4.
Reversing lamps (W16W).
5.
Direction indicators (PY21W).
Model with LED lamps
3.
Sidelamps (5W5).
4.
Brake lamps (P21/W).
5.
Direction indicators (WY16W).
6.
Reversing lamps (W16W).
Model with conventional bulb lamps
309
8
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
Lamps on the tailgate
To change a sidelamp and brake lamp bulb:
F
Turn the bulb holder a quarter of a turn
anti-clockwise and pull the bulb out.
F
Change the bulb.
Identify the failed bulb.
F
Open the boot.
F
Remove the access cover.
F
Remove the three lamp fixing screws A.
F
Disconnect the lamp connector.
F
Carefully remove the lamp from the outside
by pressing the retaining clip B.
To change a reversing lamp or direction
indicator bulb:
F
Use a standard pair of pliers to turn the
bulb holder a quarter turn anticlockwise,
and pull it out.
F
Change the bulb.
For reassembly, carry out these operations in
reverse order.
Model with LED lamps
Model with conventional bulb lamps
310
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
1.
Direction indicators (PY21W amber).
2.
Sidelamps / foglamps (P21/5W).
Rear lamps
3.
Sidelamps (light-emitting diodes - LEDs).
4.
Brake lamps (light-emitting diodes - LEDs).
5.
Direction indicators (PY21W).
6.
Reversing lamps (light-emitting diodes -
LEDs).
Model with LED lamps
3.
Sidelamps (W5W).
4.
Brake lamps / sidelamps (P21W).
5.
Direction indicators (WY16W).
6.
Reversing lamps (W16W).
Model with conventional bulb lamps
Light-emitting diodes -
LEDs
For replacement, contact a CITROËN
dealer or qualified workshop.
311
8
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
Lamps on the tailgate
Model with LED lamps
Model with conventional bulb lamps
Identify the failed bulb.
F
Open the boot.
F
Remove the access cover.
F
Remove the three lamp fixing screws A.
F
Disconnect the lamp connector.
F
Carefully remove the lamp from its housing.
F
Turn the bulb holder a quarter of a turn
anti-clockwise and pull the bulb out.
F
Change the bulb.
For reassembly, carry out these operations in
reverse order.
312
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
Direction indicator, sidelamp and
foglamp
Access is by passing a hand under the bumper.
F
Turn the bulb holder a quarter of a turn and
pull it out.
F
Change the bulb.
For reassembly carry out these operations in
reverse order.
You can also contact a CITROËN dealer or a
qualified workshop for the replacement of these
bulbs.
For the replacement of this type of lamp,
contact a CITROËN dealer or a qualified
workshop.
Third brake lamp (light-emitting
diodes-LED)
Number plate lamps
(W5W)
To refit, press on the lens to clip it in place.
F
Insert a thin screwdriver into one of the cut-
outs in the lens.
F
Push it outwards to unclip it.
F
Remove the lens.
F
Change the faulty bulb.
313
8
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
Before changing a fuse:
F
the cause of the failure must be identified
and rectified,
F
all electrical consumers must be
switched off,
F
the vehicle must be immobilised with the
ignition off,
F
identify the failed fuse using the tables and
layout drawings in the following pages.
Changing a fuse
Good
Failed
The replacement of a fuse not shown in
the tables below may cause a serious
malfunction of your vehicle. Contact
a CITROËN dealer or a qualified
workshop.
Tweezer
Changing a fuse
The extraction tweezer is located in the
dashboard fusebox compartment.
For access to it:
F
unclip the cover by pulling at the top right,
then left,
F
disengage the cover completely, by
carefully pulling in the direction indicated
by the arrow,
F
remove the tweezer.
Access to the tools
To replace a fuse, you must:
F
use the special tweezer to extract the fuse
from its housing and check the condition of
its filament.
F
always replace the failed fuse with a fuse of
the same rating (same colour); using a fuse
of a different rating could cause faults (risk
of fire).
If the fuse fails again soon after replacement,
have the vehicle's electrical system checked by
a CITROËN dealer or a qualified workshop.
314
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
CITROËN will not accept responsibility
for the cost incurred in repairing your
vehicle or for rectifying malfunctions
resulting from the installation of
accessories not supplied and not
recommended by CITROËN and
not installed in accordance with its
instructions, in particular when the
combined consumption of all of the
additional equipment connected
exceeds 10 milliamperes.
Installing electrical
accessories
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your
vehicle, contact a CITROËN dealer or a
qualified workshop.
315
8
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
Dashboard fuses
The two fuseboxes are located in the lower dashboard (left-hand side).
F
Refer to "Access to the tools".
Fuse tables
Fusebox 1
Fuse N°
Rating
Functions
F1
40 A
Heated rear screen.
F2
20 A
Electric door mirrors.
F5
30 A
Panoramic sunroof blind
F6
20 A
12 V socket, rear multimedia.
F7
20 A
230 V socket.
F9
25 A
Heated seats.
F10
20 A
Trailer interface unit.
F11
20 A
Air conditioning fan.
F12
30 A
Electric window motors.
Access to the fuses
316
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
Fusebox 2
Fuse N°
Rating
Functions
F7
10 A
Boot 12 V socket, rear multimedia.
F8
20 A
Rear wiper.
F10
30 A
Locks.
F17
5 A
Instrument panel.
F18
5 A
Automatic gearbox gear selector.
F21
3 A
START/STOP button.
F22
3 A
Rain and sunshine sensor, windscreen camera.
F24
5 A
Parking sensors, panoramic visual aid.
F27
5 A
Automatic gearbox.
F29
20 A
Audio and telematic systems.
F32
15 A
12 V sockets.
F35
5 A
Headlamp beam height adjustment, heated rear screen, radar.
F36
5 A
Interior lighting: glove box, central storage, reading lamps,
courtesy lamps.
317
8
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
Engine compartment fuses
The fusebox is placed in the engine
compartment near the battery.
Fuse N°
Rating
Functions
F16
20 A
Headlamp wash.
F18
10 A
Right hand main beam.
F19
10 A
Left hand main beam.
F29
40 A
Wipers.
Fuse table
F
Unclip the cover, by pushing the two red
latches towards the rear of the vehicle.
F
Change the fuse.
F
When you have finished, close the cover
carefully to ensure correct sealing of the
fusebox.
Access to the fuses
318
In the event of a breakdown
C4-Picasso-II_en_Chap08_en-cas-panne_ed02-2016
12 V battery
The battery is located under the bonnet.
For access to the (+) terminal:
F
release the bonnet using the interior lever,
then the exterior safety catch,
F
raise the bonnet and secure it with its stay,
F lift the plastic cover for access to the (+)
terminal.
Access to the battery
Procedure for starting the engine using another battery or charging a discharged battery.
Protect your eyes and face before
handling the battery.
All operations on the battery must be
carried out in a well ventilated area and
away from naked flames and sources
of sparks, so as to avoid the risk of
explosion or fire.
Wash your hands afterwards.
Versions equipped with Stop & Start are
fitted with a 12 V lead-acid battery of
specific technology and specification.
Its replacement should be carried out
only by a CITROËN dealer or a qualified
workshop.
Batteries contain harmful substances
such as sulphuric acid and lead.
They must be disposed of in
accordance with regulations and must
not, in any circumstances, be discarded
with household waste.
Take used remote control batteries and
vehicle batteries to a special collection
point.
General points
Lead-acid starter batteries
If your vehicle has an automatic
gearbox, do not try to start the engine
by pushing the vehicle.
The (-) battery terminal is not accessible.
A remote earth point is located in the upper
section under the bonnet (alongside the
battery).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст