Citroen Jumpy Multispace (2014 year). Instruction — part 13
9.29
07
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
Enter the same code on the telephone then accept
the connection.
Then accept automatic connection on the telephone to allow the
telephone to reconnect automatically every time the vehicle is
started.
The ability of the system to connect in only one mode depends on
the telephone. The two modes may both connect by default.
USING THE TELEPHONE
The "
Hands-free mode " should be used in preference if
"Streaming" is not desired.
The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone
manual and with your network provider for details of the services available to you.
Select a code for the connection then
confi rm "
OK ".
Depending on the type of telephone, the system will ask you to
accept or not the transfer of your contacts.
On return to the vehicle,the last telephone connected
automatically reconnects, within around 30 seconds after
switching on the ignition (Bluetooth activated and visible).
To modify the automatic connection mode, remove the pairing
and pair the telephone again with the desired mode.
9.30
07
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
USING THE TELEPHONE
DIRECTORY / SYNCHRONIZING CONTACTS
Press
PHONE then select " Contacts
management " and confi rm.
Select "
New contact " to enter a new
contact.
Select "
Sort by Name/First name " to
choose the order in which they appear.
Select "
Delete all contacts " to delete
the contacts saved in the system.
Selection "
Synchronization options ":
-
No synchronization: only the
contacts saved in the system
(always present).
- Display telephone contacts: only the
contacts saved in the telephone.
- Display SIM card contacts: only the
contacts saved on the SIM card.
-
Display all phone contacts:
contacts on the SIM card and in the
telephone.
Select "
Import all the entries " to import
all the contacts in the telephone and
save them in the system.
Once imported, a contact remains visible
whatever telephone is connected.
Select "
Contact mem. status " to see the
number of contacts saved in the system
or imported, and the free memory.
9.31
07
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
MANAGING CONTACTS
Press
PHONE then select " Directory of
contacts " and confi rm.
Select the desired contact and confi rm.
Select "
Import " to copy one contact to
the system.
Select "
Call " to start the call.
Select "
Open " to view an external contact
or modify a contact saved in the system.
Select
OK
Select "
Delete " to delete a contact saved
in the system.
It is necessary to import an external contact to modify the record.
It will be saved in the system. It is not possible to modify or delete
contacts in the telephone or the SIM card via the Bluetooth
connection.
USING THE TELEPHONE
or
press the back button to exit this menu.
Delete the addresses saved in the directory of contacts:
-
Press on
PHONE .
-
Select "Directory of contacts".
- Select "Display contacts" and confi rm, then select the address.
- Select "Delete" and confi rm.
(This operation must be carried out contact by contact).
9.32
07
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
Press
PHONE twice.
Select "
Dial " then confi rm.
Select "
Directory of contacts " then
confi rm.
Dial the telephone number using the
virtual keypad selecting each number
in turn.
Confi rm "
OK " to make the call.
Press
TEL or twice on PHONE .
CALLING A NEW NUMBER
CALLING A CONTACT
Select the desired contact and confi rm.
If access was via the
PHONE button,
select "
Call " and confi rm.
Select the number and confi rm to start
the call.
MAKING A CALL
Use of the telephone is not recommended while driving. We
recommended that you park safely or make use of the steering
mounted controls.
9.33
07
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
USING THE TELEPHONE
CALLING A RECENTLY ENTERED NUMBER
Press
TEL , select " Call list " and
confi rm,
Select the desired number and confi rm.
To erase the calls log, press
PHONE twice, select " Phone
functions " and confi rm then select " Delete calls log " and
confi rm.
ENDING A CALL
Press
PHONE then select " OK " to end
the call.
Or make a long press on
TEL at the
steering mounted controls.
Or make two short presses on
TEL at
the steering mounted controls.
Or press the
MODE button, as many
times as necessary, until the telephone
screen is displayed.
Press
PHONE to display the calls log.
or
Press "
OK " to display the contextual
menu then select "
Hang up " and
confi rm.
9.34
07
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
USING THE TELEPHONE
RECEIVING A CALL
An incoming call is announced by a ring and a superimposed display
on the screen.
"Yes " to accept the call is selected by
default.
Press "
OK " to accept the call.
Select "
No " and confi rm to reject the
call.
A short press on
TEL accepts an
incoming call.
A long press on
TEL rejects an incoming
call.
9.35
07
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
USING THE TELEPHONE
OPTIONS DURING A CALL *
During a call, press the
MODE button
several times to select display of the
telephone screen, then press "
OK " to
open the contextual menu.
Select "
Private mode " and confi rm to
take the call on the handset.
Or select "
Hands-free mode " and
confi rm to take the call via the vehicle's
speakers.
Select "
Put call on hold " and confi rm to
put the current call on hold.
Or select "
Resume the call " and
confi rm to resume the call on hold.
Select "
DTMF ring tones " to use the
numerical keypad, so as to navigate
through the menu of an interactive vocal
server.
Select "
Hang up " to end the call.
* Depending on the compatibility of the phone and your service plan.
It is possible to hold a 3-way conference
call by making 2 calls in succession*.
Select "
Conference mode call " in
the contextual menu accessible using
this button.
Or make a short press on this button.
9.36
07
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
Press
PHONE twice.
Select "
List of the paired peripherals "
and confi rm.
It is possible to:
-
"
Connect " or " Disconnect " the
selected telephone,
- delete the pairing of the selected
telephone.
It is also possible to select all pairings.
USING THE TELEPHONE
MANAGING PAIRED TELEPHONES
CHANGING THE RING TONE
Press
PHONE twice.
Select "
Phone functions " and confi rm.
Select "
Ring options " and confi rm.
You can adjust the volume and the type
of ring tone.
Select "
Bluetooth functions ".
Select "
OK " and confi rm to save the
changes.
9.37
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
9.38
08
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
RADIO
Access to the "RADIO" menu
" " " " " " " " " " " " " " " " " " "
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band
FM / AM band " " " " " " " " " " " " " " " " " " "
Press or or use the rotary control to select the
previous or next station in the list.
Go from the list to the menu (left/right).
or
Press
RADIO .
9.39
08
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
RADIO
By alphabetical list
Press
RADIO , select the station of your
choice and confi rm.
By automatic frequency search
Press or for the automatic search
for a lower or higher radio frequency.
Or turn the thumb wheel at the steering
mounted controls.
By manual frequency search
Press or to adjust the radio
frequency step by step.
SELECTING A STATION
The external environment (hill, building, tunnel, underground car park…) may interfere with the reception, including in RDS station tracking mode.
This phenomenon is a normal result of the way in which radio waves are transmitted and does not in any way indicate a fault with the audio system.
The quality of reception is represented by the number of
active waves in this symbol.
Press
RADIO or OK to display the
contextual menu.
CHANGING WAVEBAND
Select "
Change waveband ".
Select "
AM / FM " and confi rm.
9.40
08
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
Press the button on the numerical keypad to recall a
preset station.
Or press then turn the thumb wheel at the steering
mounted controls.
PRESETTING A STATION
After selecting a station, press one of the buttons
on the numerical keypad for 2 seconds to preset the
current station.
An audible signal confi rms that the station has been preset.
Press
RADIO .
ACTIVATE / DEACTIVATE RDS
RDS, if activated, allows you to continue listening to the same
station by automatic retuning to alternative frequencies. However,
in certain conditions, coverage of an RDS station may not be
assured throughout the entire country as radio stations do not
cover 100 % of the territory. This explains the loss of reception of
the station during a journey.
Select "
Guidance options " then
confi rm.
Activate or deactivate "
RDS " then
confi rm.
RADIO
9.41
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
9.42
09
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
Access to the "MUSIC MEDIA PLAYER" menu
" " " " " " " " " " " " " " " " " " "
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA
MEDIA " " " " " " " " " " " " " " " " " " "
Go from the list to the menu (left/right).
or
Press
MUSIC .
9.43
09
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
CD, MP3 CD / USB PLAYER
The audio equipment will only play audio fi les with ".wma, .aac, .fl ac,
.ogg and .mp3" fi le extensions and with a bit rate of between 32 Kbps
and 320 Kbps.
It also supports VBR (Variable Bit Rate) mode.
No other type of fi le (.mp4, .m3u…) can be played.
WMA fi les must be of the standard wma 9 type.
The sampling rates supported are 11, 22, 44 and 48 KHz.
It is advisable to restrict fi le names to 20 characters, without using of
special characters (e.g.: " " ? ; ù) to avoid any playing and displaying
problems.
In order to be able to play a recorded CDR or CDRW, when recording
it is preferable to select the ISO 9660 level 1, 2 or Joliet standard.
If the disc is recorded in another format it may not be played correctly.
It is recommended that the same recording standard is always used
for an individual disc, with as low a speed as possible (4x maximum)
for optimum sound quality.
In the particular case of a multi-session CD, the Joliet standard is
recommended.
INFORMATION AND ADVICE
The system supports USB mass storage or iPod
devices via the USB port (suitable cable not supplied).
If a partitioned USB memory key is connected to the
system, only the fi rst partition is recognised.
Control of the peripheral device is with the audio
system controls.
The number of tracks is limited to 2000 maximum,
999 tracks per folder.
If the current consumption at the USB port exceeds
500 mA, the system goes into protection mode and
deactivates the port.
Other peripherals, not recognised on connection, must
be connected to the auxiliary socket using a Jack cable
(not supplied).
In order to be read, a USB memory stick must be formatted FAT 16 or 32.
The system does not support the operation of an Apple
®
player and a
®
®
USB memory stick connected at the same time.
It is recommended that offi cial Apple
®
USB cables are used to ensure
®
®
correct operation.
9.44
09
JUMPY-ATLANTE-VP_EN_CHAP09B_RT6-2-7_ED01-2014
MUSIC MEDIA PLAYERS
Insert the CD in the player, insert the USB
memory stick in the USB player or connect the
USB peripheral to the USB port using a suitable
cable (not supplied).
The system builds playlists (in temporary
memory), an operation which can take from
a few seconds to several minutes at the fi rst
connection.
Reduce the number of non-music fi les and the
number of folders to reduce the waiting time.
The playlists are updated every time the ignition
is switched off or connection of a USB memory
stick. However, the system memorises these
lists and if they are not modifi ed, the loading
time will be shorter.
Play starts automatically after a period which
depends on the capacity of the USB memory
stick.
SELECTION OF SOURCE
The
SOURCE button on the steering mounted controls allows a
direct change to the next media source.
"
CD / CD MP3 "
"
USB, iPod "
"
AUX "
"
STREAMING "
"
RADIO "
Press
MUSIC to display the " MEDIA "
menu.
Select "
Following media source " and
confi rm.
Repeat the operation as many times as necessary to obtain the
desired media source (except for radio which is accessible either
with
SOURCE or RADIO ).
SOURCES
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст