Citroen C4 Picasso Dag (2009 year). Instruction — part 3
33
I
I N S T R U M E N T S a n d C O N T R O L S
Total distance recorder
System which measures the total
distance travelled by the vehicle
during its life.
The total and trip distances are dis-
played for thirty seconds when the
ignition is switched off, when the
driver's door is opened and when
the vehicle is locked or unlocked.
Trip distance recorder
System which measures a distance
travelled during a day or other pe-
riod since it was reset to zero by the
driver.
With the ignition on, press the
button until zeros appear.
Lighting rheostat
System for manual adjustment of
the brightness of the instruments
and controls in relation to the exterior
brightness.
Activation
When the vehicle lighting is on:
press the button to change the
brightness of the instruments
and controls,
when the lighting reaches the
minimum setting, release the
button, then press again to in-
crease it,
or
when the lighting reaches the
maximum setting, release the but-
ton, then press again to reduce it,
when the lighting reaches the
level of brightness required, re-
lease the button.
Deactivation
When the vehicle lighting is off, or
in day mode on vehicles fi tted with
daytime running lamps, pressing the
button does not have any effect.
34
II
M U L T I F U N C T I O N S C R E E N S
MULTIFUNCTION SCREEN A
Presentation
1. Time
2. Date and display zone
3. Ambient temperature
When the ambient temperature is
between +3 °C and -3 °C, the tem-
perature display fl ashes (ice risk).
The ambient temperature displayed
may be greater than the actual tem-
perature, if the vehicle is parked in
bright sunlight.
The display of certain types of in-
formation is sometimes by scrolling
and sometimes by alternation.
A.
Access to the "Main Menu"
B.
Scrolling in the screen menus
C.
Selection and confi rmation in the
menus of the function chosen or
the value modifi ed
D.
Cancellation of the operation or
return to the previous display
E.
Selection of the type of information
to be displayed in zone 2
(date,
radio-CD and trip recorder)
B or F.
Within the menus, choice
of activation/deactivation of
functions and selection of
adjustments
By pressing on the button A , then
using button B
, you have access to
the following functions:
Radio-CD (see "Audio")
Vehicle confi guration , to acti-
vate/deactivate:
- operation of the rear wiper,
- automatic guide-me-home lighting,
- electric parking brake auto-
matic functions (application/
release)*,
- door selectivity,
- lighting of daytime running
lamps (depending on country).
Options , for display of alert mes-
sages
Display adjustments , for adjusting
the date and time on the screens
Languages , for choosing the
screen language
Units , giving you access to the
choice of units of temperature
and units of fuel consumption
Controls
Main Menu
It is recommended that the driver
should not manipulate the controls
while the vehicle is in motion.
* According to country
35
II
M U L T I F U N C T I O N S C R E E N S
Displaying the log of alerts
Press on A
.
Use B
to select the submenu for
options. Confi rm with two presses
on C
.
You can cancel the start of the dis-
play by pressing button E to abandon
and validating by pressing C
.
Alerts signalled previously but not
resolved, will scroll in the display for
recall.
To clear the displaying of an alert,
press D
.
Adjusting the date and the
time
Press on A
.
Use B
to select the submenu for
display adjustments, then con-
fi rm by pressing C .
Press B
to select what you want
to modify: year, month, day, hour,
minutes, mode of display.
Make your adjustment by press-
ing F
. You can continue your ad-
justments by selecting a different
element by presses on B
. When
you have fi nished your adjust-
ments, press C
.
Configuring the vehicle
functions
Press on A
.
Use B
to select the sub-menu for
personalisation confi guration of
your vehicle, then confi rm your
choice with a press on C .
Select the function to be confi g-
ured by pressing B
.
The system tells you whether
the function status is active or in-
active. Modify this status with a
press on F
.
Validate with a press on C
.
Choosing the language
Press on A
.
Use B
to select the submenu for
languages. Confi rm your choice
with a press on C
.
With presses on F
, select the
language of your choice, then
validate with a press on C
.
Choosing the units
Press on A
.
Press B
to select the sub-menu
for Units. Confi rm your choice
with a press on C
.
Press B
to select the type of unit
you wish to modify (Temperature
or Fuel Consumption).
With presses on F
, select the
unit of your choice, then validate
with a press on C
.
This choice concerns all the infor-
mation (Consumption-Speed) ap-
pearing on the screens.
36
II
M U L T I F U N C T I O N S C R E E N S
MULTIFUNCTION SCREEN C
Main Menu
Presentation
Radio-CD
(see "Audio and
Telematics")
Trip computer
This permits:
Bluetooth
®
hands-free kit
(see "Audio" and
Telematics)
Controls
1. Time
2. Ambient temperature
3. Date and display zone
When the ambient temperature is be-
tween +3 °C and -3 °C, the tempera-
ture display fl ashes (risk of ice).
The ambient temperature displayed
may be greater than the actual tem-
perature, if the vehicle is parked in
bright sunlight.
It is recommended that the driver
should not manipulate the controls
while the vehicle is in motion.
A.
Access to the "Main Menu"
B.
Scrolling in the screen menus
C.
Selection and confi rmation in the
menus of the function chosen or
the value modifi ed
D.
Cancellation of the operation or
return to the previous display
E.
Selection of the type of informa-
tion to be displayed permanently
(date, radio-CD, trip computer)
on the right of the screen
Press on the button A to view the
"Main Menu" of the multifunction
screen. This menu gives you access
to the following functions:
- entering the distance to your
destination,
- access to the log of alerts (recall
of alerts signalled previously),
- access to the status of functions,
such as the activation/deactiva-
tion of automatic headlamps,
automatic windscreen wipers,
ESP...
37
II
M U L T I F U N C T I O N S C R E E N S
Personalisation -
Configuration
This permits activation/deactivation
of certain functions which may be
present or not depending on the trim
level of your vehicle:
-
operation of the rear wiper,
- automatic guide-me-home lighting,
- directional headlamps,
- electric parking brake automatic
functions (application/release) (de-
pending on destination country)
- door selectivity,
-
lighting of daytime-running lamps
(depending on country),
- rear parking assistance,
and setting of the:
-
brightness intensity, time, date
and units,
- screen language.
Activating/deactivating
rear screen wipe when you
engage reverse gear
Press on A
.
Use B
to select "Personalisation-
Confi guration", then confi rm your
choice with a press on C .
Then select "Defi ne vehicle pa-
rameters". Confi rm your choice
with a press on C
.
Using B
, select "Parking assist-
ance". Confi rm your choice with
a press on C
.
Then by pressing C
, select/
deselect "Activation of rear wiper
in reverse gear" to activate/de-
activate this.
Confi rm with "OK" on the screen.
Activating/deactivating
automatic guide-me-home
lighting
Press on A
.
Use B
to select "Personalisation-
Confi guration", then confi rm your
choice with a press on C .
Then select "Defi ne vehicle pa-
rameters". Confi rm your choice
with a press on C
.
Using B
, select "Lighting and
signalling". Confi rm your choice
with a press on C
.
Then by pressing C
, select/dese-
lect "Guide-me-home headlamps"
to activate/deactivate this. After
activation, choose its duration:
press on C , then use B
to select
the duration and then press on C
.
Confi rm with "OK" on the screen.
Activating/deactivating
Xenon dual-function
directional headlamps
Press on A
.
Use B
to select "Personalisation-
Confi guration", then confi rm your
choice with a press on C .
Then select "Defi ne vehicle pa-
rameters". Confi rm your choice
with a press on C
.
Using B
, select "Driving assist-
ance". Confi rm your choice with
a press on C
.
Then by pressing C
, select/dese-
lect "Directional headlamps" to
activate/deactivate them.
Confi rm with "OK" on the screen.
38
II
M U L T I F U N C T I O N S C R E E N S
Activating/deactivating
electric parking brake
automatic functions
(application/release) *
Press on A
.
Use B
to select "Personalisation-
Confi guration", then confi rm your
choice with a press on C .
Then select "Defi ne vehicle pa-
rameters". Confi rm your choice
with a press on C
.
Activating/deactivating door
selectivity
Press on A
.
Use B
to select "Personalisation-
Confi guration", then confi rm your
choice with a press on C .
Then select "Defi ne vehicle pa-
rameters". Confi rm your choice
with a press on C
.
Using B
, select "Access to the ve-
hicle". Confi rm your choice with a
press on C
.
Then by pressing C
, select the
level of vehicle access desired.
Confi rm with "OK" on the screen.
Adjusting the date and time
Press on A
.
Use B
to select "Personalisation-
Confi guration", then confi rm your
choice with a press on C .
Select "Display confi guration" us-
ing B
. Confi rm with a press on C .
Select "Date and the time adjust-
ment" using B . Confi rm with a
press on C
.
Press B
to select the values you
wish to modify. Confi rm your
choice with a press on C .
Make your adjustments by press-
ing B
, confi rming each adjust-
ment choice by pressing C .
Confi rm with "OK" on the screen.
Using B
, select "Driving assist-
ance". Confi rm your choice with
a press on C
.
Then by pressing C
, select/
deselect "Automatic handbrake"
to activate/deactivate the electric
parking brake automatic func-
tions (application/release).
Confi rm with "OK" on the screen.
* Depending on country.
39
II
M U L T I F U N C T I O N S C R E E N S
Choosing the units
Press on A
.
Use B
to select "Personalisation-
Confi guration", then confi rm your
choice with a press on C .
Select "Display confi guration" us-
ing B
. Confi rm with a press on C .
Then select "Choice of units".
Confi rm your choice with a press
on C
.
Choosing the language
Press on A
.
Use B
to select "Personalisation-
Confi guration", then confi rm your
choice with a press on C .
Select "Choice of language" us-
ing B
. Confi rm with a press on C .
Using B
, select the language
and validate your choice with a
press on C
.
Confi rm with "OK" on the screen.
Using B
, select the unit you wish
to modify (Temperature or Fuel
consumption), then confi rm by
pressing C
.
Confi rm with "OK" on the screen.
This choice affects all the information
(Fuel consumption - Speed) appear-
ing on the screens.
40
II
M U L T I F U N C T I O N S C R E E N S
NAVIDRIVE MULTIFUNCTION
COLOUR SCREEN
Presentation
1. Ambient temperature
2.
Directory
3. Date
4. Telephone
5. Time
When the ambient temperature is be-
tween +3 °C and -3 °C, the tempera-
ture display fl ashes (risk of ice).
The ambient temperature displayed
may be greater than the actual tem-
perature, if the vehicle is parked in
bright sunlight.
It is recommended that the driver
should not operate the controls
while the vehicle is in motion.
Controls
Main Menu
Traffi c Information
Navigation/Guidance
Map
Audio Functions
Telematics
Confi guration,
for adjusting various parame-
ters (date, time, units)
Video
Vehicle Diagnostics
A.
Access to the "Main Menu"
B.
Scrolling in the screen menus
C.
Selection and confi rmation in the
menus of the function chosen or
the value modifi ed
D.
Cancellation of the operation or
return to the previous display
E.
Selection of the type of informa-
tion to be displayed permanently
(date, radio-CD, trip computer)
on the right of the screen
Press on the button A to view the
"Main Menu" of the multifunction
screen.
This menu gives you access to the
following functions (see "NaviDrive
Instructions"):
41
II
M U L T I F U N C T I O N S C R E E N S
TRIP COMPUTER
System which provides current infor-
mation concerning the trip travelled
(range, fuel consumption...).
Monochrome screen A
Data displays
Press the control for more than
two seconds to reset to zero the
distance travelled, the average
fuel consumption and the aver-
age speed.
Zero reset
The trip computer provides the fol-
lowing information:
- range,
- current fuel consumption,
- distance travelled,
- average fuel consumption,
- average speed.
The next press then returns you
to the normal display.
Press the button, located at the
end of the wiper
stalk , to display
the various items of trip compu-
ter data in succession.
42
II
M U L T I F U N C T I O N S C R E E N S
TRIP COMPUTER
System which provides current infor-
mation concerning the route travelled
(range, consumption, …).
Monochrome screen C
NaviDrive colour screen
Display of information
Trip zero reset
Press the button, located at the
end of the wiper
stalk , to display
the various trip computer infor-
mation groups in succession:
- the current information
group with:
range,
current consumption,
distance remaining
to be travelled,
- the trip "1"
group with:
distance travelled,
average consumption,
average speed,
for the fi rst trip.
- the trip "2"
group with:
the distance
travelled,
the average
consumption,
the average speed,
for the second trip.
When the trip required is dis-
played, press the control for
more than two seconds.
The trips "1" and "2" are independent
but their use is identical.
Trip "1" permits, for example, daily
calculations, and trip "2" monthly
calculations.
43
II
M U L T I F U N C T I O N S C R E E N S
"Trip computer" menu
System which provides general in-
formation concerning the status of
certain equipment with which your
vehicle is equipped, such as the alert
log, the status of the functions...
Alert log
This summarises the active warning
messages, displaying them in suc-
cession on the multifunction screen.
Status of functions
This summarises the active or inac-
tive status of systems present on the
vehicle.
Enter distance to destination
This enables you to enter an ap-
proximate value for the distance to
the fi nal destination.
Monochrome screen C
"Vehicle Diagnostics" menu
Press the "MENU" button to gain
access to the general menu.
Turn the dial and press it to
select the
"Vehicle Diagnostics"
menu.
On the
"Vehicle Diagnostics"
menu, select one of the following
applications:
- "Alert log",
- "Status of functions".
Press the "MENU" button to gain
access to the general menu.
Press the arrows, then the "OK"
button to select the
"Trip com-
puter" menu.
On the
"Trip computer" menu,
select one of the following appli-
cations:
- "Alert log",
- "Status of functions",
- "Enter distance to destination".
NaviDrive colour screen
44
II
M U L T I F U N C T I O N S C R E E N S
A few definitions…
Range
(miles or km)
This fi gure may vary following a
change in the style of driving or
the relief, resulting in a signifi cant
change in the current consumption.
When the range falls below 20 miles
(30 km), dashes are displayed. After
fi lling with at least 5 litres of fuel,
the range is recalculated and is dis-
played when it exceeds 60 miles
(100 km).
If dashes are displayed continu-
ously while driving in place of the
digits, contact a CITROËN dealer.
This indicates the distance which
can still be travelled with the fuel re-
maining in the tank in relation to the
average consumption over the last
few miles (kilometres) travelled.
Current fuel consumption
(mpg or l/100 km or km/l)
Average fuel
consumption
(mpg or l/100 km or km/l)
This is the average fuel consump-
tion since the last trip computer zero
reset.
Distance travelled
(miles or km)
This indicates the distance travelled
since the last trip computer zero reset.
Average speed
(mph or km/h)
This is the average speed calculated
since the last trip computer zero re-
set (ignition on).
Distance remaining to
destination
(km or miles)
This is the distance remaining to be
travelled to the fi nal destination. It
is either calculated instantly by the
navigation system, if guidance is ac-
tivated, or entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
This function is only displayed from
20 mph (30 km/h).
This is the average fuel consump-
tion during the last few seconds.
45
III
C O M F O R T
RECOMMENDED SETTINGS FOR THE VENTILATION, HEATING
AND AIR CONDITIONING
Air inlet
Check that the exterior grille for the
air inlet, at the bottom of the wind-
screen, is clean and free of dead
leaves, snow, etc.
Air distribution
1. Windscreen demisting/defrosting
vents.
2. Front side windows demisting/
defrosting vents.
3. Adjustable and closing side air
vents.
4. Adjustable and closing central
air vents.
5. Front occupant footwell air out-
lets.
6. Adjustable and closing 2nd row
side air vents, with air fl ow and
temperature adjustment.
7. Rear passenger footwell air out-
lets.
8. Adjustable and closing 3rd row
side air vents.
The side air vents 8 apply only to the
7-seater versions.
46
III
C O M F O R T
Air conditioning
To ensure that your system operates
correctly, it is recommended to have
it checked regularly.
Water arising from condensation
in the air conditioning drains away
through a hole provided for this pur-
pose. A pool of water may thus form
under the vehicle when stationary.
To keep the air conditioning com-
pressor well sealed, it is essential to
operate the air conditioning at least
once in every month.
Regardless of the season, the air
conditioning is useful, since it re-
moves humidity and condensation.
To be effective, the air conditioning
should only be used with the win-
dows closed.
If after a lengthy stop in bright sun-
light the interior temperature is exces-
sive, air the passenger compartment
by opening the windows for a few
moments, then close them again.
The air conditioning operates by using
power from the engine. This results in
a slight increase in fuel consumption.
Dust filter/Odour filter
(active carbon)
There is a fi lter for excluding odours
and dust.
This fi lter has to be changed in ac-
cordance with the vehicle's servic-
ing schedule (see "Maintenance and
Warranty Guide").
Air circulation
Air vents on the fl oor underneath the
front seats provide enhanced heat-
ing for the rear seat positions; take
care not to obstruct them.
Air vents
The air vents to the face have grilles
and thumbwheels to adjust the air
fl ow and direction (up-down, right-
left).
The automatic regulation of the air
conditioning, inside the cabin, uses
a number of sensors (sunlight sen-
sor, outside temperature sensor...)
that relieve you of the need to make
frequent adjustments outside the
displayed temperature.
Be careful not to obstruct the sun-
light sensor, located on the dash-
board behind the instrument panel.
Sensors
54
III
C O M F O R T
RECOMMENDED INTERIOR SETTINGS
-
Heating/Manual air conditioning
To make the best use of the system, we recommend:
-
Automatic air conditioning
With automatic air conditioning, you are recommended to choose AUTO operation.
Action
To have
Cold
or
Max. cold to
start with,
then personal
adjustments
Max. to start
with, then
personal
adjustments
ON
ON to start
with,
then OFF
Hot
or
Max. hot to
start with,
then personal
adjustments
Max. to start
with, then
personal
adjustments
ON to start
with,
then OFF
Demisting
Defrosting
Max. hot
OFF
47
III
C O M F O R T
MANUAL AIR CONDITIONING
A. DRIVER’S CONTROL
PANEL
1. Adjustment of the air
blower speed
The air blower adjustment only op-
erates when the engine is running.
To adjust the air fl ow, press on but-
ton 1 :
to increase the fl ow of air,
to decrease the fl ow of air.
The level of air fl ow is shown by the pro-
gressive lighting of the warning lamps
depicting the ventilator blades 1 .
By reducing the fl ow to minimum,
you deactivate the air conditioning
system (OFF).
To achieve an agreeable level of
comfort in the passenger compart-
ment, you should not leave this con-
trol too long in the OFF position.
2. Adjustment of the air
distribution
Press on button 2 to make the
display scroll through the differ-
ent types of air distribution.
The air distribution chosen
is shown by the lighting of
the corresponding warning
lamps on the display 2.
3. Mode of adjustment
of temperature for the
passenger
Press on button 3 to have inde-
pendent passenger control of
cabin air temperature. The warn-
ing lamp goes out.
While the passenger is adjusting tem-
perature, the warning lamp lights up.
4. Air recirculation
This control is for isolating disagree-
able odours or fumes coming from
outside.
Press on button 4 , to exclude
entry of outside air. The warning
lamp lights up.
This should be cancelled as soon
as possible to permit renewal of
cabin air and to prevent misting
forming on the windows.
Press again on button 4 , to de-
activate air recirculation.
5. Air conditioning
The air conditioning can only oper-
ate when the engine is running. The
air blower control (adjusting the fl ow
of air) has to be activated in order for
air conditioning to be obtained.
Press on button 5 . The warning
lamp lights up.
To be effective, the air condi-
tioning should be operated only
with the windows closed.
If your vehicle is not equipped with
air conditioning, you will have the
same control panel but without the
A/C button.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст