Citroen Jumpy (2016 year). Instruction — part 27

415

Audio and Telematics

Jumpy_en_Chap10b_NAC-1_ed01-2016

Level 1

Level 2

Level 3

Comments

Settings

Secondary page

Screen

configuration

Animation

Activate or deactivate settings.

Brightness

Adjust the level of brightness.

Confirm

Save the settings.

Settings

Secondary page

System

settings

Units

Distance and fuel
consumption

Set the units used for distance, fuel consumption
and temperature.

Temperature

Factory settings

Reinitialize

Return to the factory settings.

System info

View

View the versions of the different modules
(system, mapping, risk areas) installed in the
system as well as the updates available.

Confirm

Save the settings.

Settings

Secondary page

Languages

All

Select the language then confirm.

Europe

Asia

America

Confirm

Having selected the language, save the setting.

416

Audio and Telematics

Jumpy_en_Chap10b_NAC-1_ed01-2016

Level 1

Level 2

Settings and tools

Setting the time-date

Setting of the profiles

Level 3

417

Audio and Telematics

Jumpy_en_Chap10b_NAC-1_ed01-2016

Level 1

Level 2

Level 3

Comments

Settings

Secondary page

Setting

the time-date

Date

Date

Enter the date and select the date format.

Date format:

Time

Time

Set the time.

Time Zone

Define the time zone.

Time format:

Select the time format: 12h / 24h.

Synchronisation with
GPS (UTC):

Activate or deactivate synchronisation with GPS.

Confirm

Save the settings.

Settings

Secondary page

Setting of the

profiles

Profile 1

Enter settings for the profiles.

Profile 2

Profile 3

Common profile

Confirm

Save the settings.

418

Audio and Telematics

Jumpy_en_Chap10b_NAC-1_ed01-2016

Press Settings to display the primary
page.

Profile settings

Audio settings

Press Settings to display the primary
page.

Select "Audio settings

Select "Ambience"

"Position"

"Sound"

"Voice"

"Ringtone

On-board audio: Arkamys

Sound

Staging optimises the distribution of
sound in the passenger compartment.

The settings for "Position" (All
passengers, Driver and Front only) are
common to all sources.

Activate or Deactivate "Touch tones",
"Volume linked to speed" and
"Auxiliary input

The sound distribution (or spatialisation
with the Arkamys

system) is audio

processing that allows the quality of the
sound to be adapted according to the
number of passengers in the vehicle.
Available only with the 6-speaker
configuration.

The audio Ambience

settings

(6 ambiences available) as well as the
Bass, Medium and Treble

settings

are different and independent for each
sound source.
Activate or Deactivate "Loudness

Press "Confirm

" to save the settings.

Press "Confirm

Press the "OPTIONS

" button to go to

the secondary page.

Select "Profile 1", "Profile 2",
"Profile 3" or "Common profile

Select "Setting of the profiles

Press this button to enter a name for
the profile using the virtual keypad.

As a safety measure and because it
requires the sustained attention of the
driver, changes to settings must only be
done with the vehicle stationary

419

Audio and Telematics

Jumpy_en_Chap10b_NAC-1_ed01-2016

Select a "Profile

" (1 or 2 or 3) to

associate the "Audio settings

" with it.

Select "Audio settings

Select "Ambience

"Distribution

"Sound

"Voice

"Ringtone

The location for the photograph is
square; the system deforms the original
photograph if in another format.

Initialisation of the profile selected
activates the English language by default.

Press "Confirm

" to save the settings.

Press "Confirm" to accept the
transfer of the photograph.

Press "Confirm

" again to save the

settings.

Press this button to add a photograph
to the profile.

Insert a USB memory stick containing
the photograph in the USB port.
Select the photograph.

Press this button to initialise the
profile selected.

420

Audio and Telematics

Jumpy_en_Chap10b_NAC-1_ed01-2016

Press Settings to display the primary
page.

Press the "OPTIONS

" button to go to

the secondary page.

Press the "OPTIONS

" button to go to

the secondary page.

Press the "OPTIONS

" button to go to

the secondary page.

Select "System settings

Select "Screen configuration

Select "Units

" to change the units

for distance, fuel consumption and
temperature.

Select "Languages

" to change the

language.

Activate or deactivatre "Automatic
scrolling

Adjust the brightness of the screen.

Select "Factory settings" to return
to the initial settings.

Select "System info" to display the
versions of the different modules
installed in the system.

Modifying system settings

Returning the system to factory settings
activates the English language by
default.

Select "Animation

Select "Brightness

Select the language

Press Settings to display the primary
page.

Press the "OPTIONS

" button to go to

the secondary page.

Select "Setting the time-date

Setting the date

421

Audio and Telematics

Jumpy_en_Chap10b_NAC-1_ed01-2016

Press Settings to display the primary
page.

Press the "OPTIONS

" button to go to

the secondary page.

Select "Date

Select "Time

Select "Setting the time-date

Adjustment of the time and date is only
available if synchronisation with GPS is
deactivated.
The change between winter and
summer time is done by changing the
time zone.

The system does not automatically
manage the change between winter
and summer time (depending on
country).

Setting the time

Press this button to define the date.

Press this button to adjust the time
using the virtual keypad.

Press "Confirm

Press this button to define the time
zone.

Select the display format of the date.

Select the display format for the
time (12h / 24h).

Activate or deactivate
synchronisation with GPS (UTC).

422

Audio and Telematics

Jumpy_en_Chap10b_NAC-1_ed01-2016

The following table groups together the answers to the most frequently asked questions concerning your audio system.

QUESTION

ANSWER

SOLUTION

The route calculation is
not successful.

The route settings may conflict with the current location (exclusion
of toll roads on a toll motorway).

Check the route settings in the "Navigation"
menu.

The POIs do not appear.

The POIs have not been selected.

Select the POIs in the list of POIs.

The audible warning of
"Danger areas" does not
work.

The audible warning is not active.

Activate audible warnings (without the possibility
of adjusting the volume) in the "Navigation"
menu.

The system does not
suggest a detour around
an incident on the route.

The guidance criteria do not take account of TMC messages.

Select a setting for the "Traffic info" function
in the list of route settings (Without, Manual or
Automatic).

I receive a "Danger area"
alert which is not on my
route.

Other than guidance, the system announces all "Danger areas"
positioned in a cone located in front of the vehicle. It may provide
an alert for "Danger areas" located on nearby or parallel roads.

Zoom in on the map to view the exact position of the
"Danger areas". Select "On the route" to no longer
receive alerts other than navigation instructions or to
reduce the time for the announcement.

Frequently asked questions

Navigation

423

Audio and Telematics

Jumpy_en_Chap10b_NAC-1_ed01-2016

QUESTION

ANSWER

SOLUTION

Certain traffic jams along
the route are not indicated
in real time.

On starting, it is several minutes before the system starts to receive
traffic information.

Wait until the traffic information is being received
correctly (display of the traffic information icons
on the map).

In certain countries, only major routes (motorways...) are listed for
the traffic information.

This phenomenon is normal. The system is
dependent on the traffic information available.

The altitude is not
displayed.

On starting, the initialisation of the GPS may take up to 3 minutes to
receive more than 4 satellites correctly.

Wait until the system has started up completely
so that there is GPS coverage by at least
4 satellites.

Depending on the geographical environment (tunnel...) or the
weather, the conditions of reception of the GPS signal may vary.

This phenomenon is normal. The system
is dependent on the GPS signal reception
conditions.

424

Audio and Telematics

Jumpy_en_Chap10b_NAC-1_ed01-2016

Radio

QUESTION

ANSWER

SOLUTION

The quality of reception of
the radio station listened
to gradually deteriorates
or the stored stations do
not function (no sound,
87.5 Mhz is displayed...).

The vehicle is too far from the transmitter used by the station
listened to or there is no transmitter in the geographical area
through which the vehicle is travelling.

Activate the "RDS" function by means of the
short-cut menu to enable the system to check
whether there is a more powerful transmitter in
the geographical area.

The environment (hills, buildings, tunnels, basement car parks...)
block reception, including in RDS mode.

This phenomenon is normal and does not
indicate a fault with the audio system.

The aerial is absent or has been damaged (for example when going
through a car wash or into an underground car park).

Have the aerial checked by a franchised dealer.

I cannot find some radio
stations in the list of
stations received.

The station is not received or its name has changed in the list.

Press on the "Update list" button in the "Radio
stations" secondary menu.

Some radio stations send other information in place of their name
(the title of the song for example).
The system interprets this information as the name of the station.

The name of the radio
station changes.

425

Audio and Telematics

Jumpy_en_Chap10b_NAC-1_ed01-2016

Media

QUESTION

ANSWER

SOLUTION

Playback of my USB
memory stick starts only
after a very long wait
(around 2 to 3 minutes).

Some files supplied with the memory stick may greatly slow down
access to reading the memory stick (multiplication by 10 of the
catalogue time).

Delete the files supplied with the memory stick
and limit the number of sub-folders in the file
structure on the memory stick.

Some characters in the
media information are not
displayed correctly while
playing.

The audio system does not display some types of characters.

Use standard characters to name tracks and
folders.

Playing of streaming files
does not start.

The peripheral device connected does not support automatic play.

Start the playback from the device.

The names of tracks and
the track length are not
displayed on the screen
when streaming audio.

The Bluetooth profile does not allow the transfer of this information.

426

Audio and Telematics

Jumpy_en_Chap10b_NAC-1_ed01-2016

QUESTION

ANSWER

SOLUTION

I cannot connect my
Bluetooth telephone.

The telephone's Bluetooth function may be switched off or the
telephone may not be visible.

Check that your telephone's Bluetooth function is
switched on.
Check in the telephone settings that it is "visible
to all".

The Bluetooth telephone is not compatible with the system.

You can check the compatibility of your
telephone at the brand's website (services).

The volume of the
telephone connected
in Bluetooth mode is
inaudible.

The volume depends both on the system and on the telephone.

Increase the volume of the audio system, to
maximum if required, and increase the volume of
the telephone if necessary.

The ambient noise level has an influence on the quality of
telephone communication.

Reduce the ambient noise level (close the
windows, reduce the booster fan speed, slow
down, ...).

Some contacts are
duplicated in the list.

The options for synchronizing contacts are synchronizing the
contacts on the SIM card, the contacts on the telephone, or both.
When both synchronizations are selected, some contacts may be
duplicated.

Select "Display SIM card contacts" or "Display
telephone contacts".

Contacts are not shown in
alphabetical order.

Some telephones offer display options. Depending on the settings
chosen, contacts can be transferred in a specific order.

Modify the display setting in the telephone
directory.

The system does not
receive SMS text messages.

The Bluetooth mode does not permit sending SMS text messages
to the system.

Telephone

427

Audio and Telematics

Jumpy_en_Chap10b_NAC-1_ed01-2016

QUESTION

ANSWER

SOLUTION

In changing the setting
of treble and bass the
equalizer setting is
deselected.

The selection of an equalizer setting imposes the settings for treble
and bass and vice-versa.

Modify the treble and bass or equalizer settings
to obtain the desired musical ambience.

In changing the equalizer
setting, treble and bass
return to zero.

When changing the
balance settings, the
distribution setting is
deselected.

The selection of a distribution setting imposes the balance settings
and vice-versa.

Modify the balance or distribution settings to
obtain the desired musical ambience.

When changing a
distribution setting,
the balance setting is
deselected.

Settings

428

Audio and Telematics

Jumpy_en_Chap10b_NAC-1_ed01-2016

QUESTION

ANSWER

SOLUTION

There is a difference in
sound quality between the
different audio sources.

For optimum sound quality, the audio settings for Loudness,
Ambience, Treble, Bass and Volume can be adapted to the different
sound sources, which may result in audible differences when
changing source.

Check that the audio settings for Loudness,
Ambience, Treble, Bass and Volume are adapted
to the sources listened to. Adjust the Balance,
Treble and Bass to the middle position, select the
"None" musical ambience and set the loudness
correction to the "Active" position in CD mode or
to the "Inactive" position in radio mode.

With the engine off, the
system switches off after a
few minutes of use.

When the engine is switched off, the system's operating time
depends on the state of charge of the battery.
The switch-off is normal: the system switches to economy mode
and switches off to prevent discharging of the vehicle's battery.

Start the vehicle's engine to increase the battery
charge.

429

Audio and Telematics

Jumpy_en_Chap10c_RCC-1_ed01-2016

CITROËN Connect Radio

Connectivity - Multimedia audio - Bluetooth

telephone

Contents

First steps

430

Steering mounted controls

Frequently asked questions

478

The system is protected in such a way that it will only operate in
your vehicle.

The link below gives access to OSS (Open Source Software)
codes for the system.
http://www.psa-peugeot-citroen.com/oss

As a safety measure and because it requires sustained attention
by the driver, the pairing of a Bluetooth mobile telephone with
the Bluetooth hands-free system of your audio system must be
done with the vehicle stationary

and the ignition on.

The display of the energy economy mode message signals that
a change to standby is imminent. For more information on the
Energy economy mode

refer to the corresponding section.

430

Audio and Telematics

Jumpy_en_Chap10c_RCC-1_ed01-2016

First steps

With the engine running, a press
mutes the sound.
With the ignition off, a press turns the
system on.

Volume.

Use the buttons either side of the touch screen
for access to the menus, then press the virtual
buttons in the touch screen. All of the touch
areas of the screen are white.
Each menu is displayed in one or two pages
(primary page and secondary page).

Secondary page

Primary page

The touch screen is of the "capacitive"
type.
To clean the screen, use a soft, non-
abrasive cloth (spectacles cloth) with
no additional product.
Do not use sharp objects on the
screen.
Do not touch the screen with wet
hands.

Была ли эта страница вам полезна?

Да!Нет

8 посетителей считают эту страницу полезной.

Citroen Jumpy (2016 year). Instruction — part 27

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.