Citroen C-Elysee (2017 year). Instruction — part 13

191

Technical data

C-elysee_en_Chap11_caracteristiques-techniques_ed01-2016

The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for
each additional 1 000 metres of altitude.
The speed of a towing vehicle must not exceed 60 mph (100 km/h) (comply with the legislation in force in your country).
High ambient temperatures may result in a reduction in the performance of the vehicle to protect the engine; if the ambient temperature is above 37 °C,
limit the towed load.

* The kerb weight is equal to the unladen weight + driver (75 kg).
** The weight of the braked trailer can be increased, within the GTW limit, if the GVW of the towing vehicle is reduced by an equal amount; warning,

towing using a lightly loaded towing vehicle may have an adverse effect on its road holding.

Engine

HDi 92

BlueHDi 100

Gearbox

Manual (5-speed)

Model code: DD...

9HJC

9HP0

BHY6

Unladen weight

1 090

Kerb weight*

1 165

Gross vehicle weight (GVW)

1 549

1 548

1 585

Gross train weight (GTW)
on a 12% gradient

2 299

2 298

2 335

Braked trailer (within the GTW limit)
on a 10% or 12% gradient

750

Brakled trailer** (with load transfer within
the GTW limit)

1 010

Unbraked trailer

580

Recommended nose weight

Diesel weights (in kg)

192

Technical data

C-elysee_en_Chap11_caracteristiques-techniques_ed01-2016

Dimensions (in mm)

193

Technical data

C-elysee_en_Chap11_caracteristiques-techniques_ed01-2016

Identification markings

Vehicle identification number (VIN)

under the bonnet.

This number is engraved on the bodywork
near the passenger compartment filter.

The tyre pressures must be checked
when the tyres are cold, at least once
a month.

Low tyre pressures introduces the risk
of a burst tyre and also increase fuel
consumption.

B. Vehicle identification number on the

dashboard.

This number is indicated on a self-adhesive
label which is visible through the windscreen.

C. Manufacturer's label.

The VIN is indicated on a self-destroying
label affixed to the lower right hand centre
pillar.

Tyre/paint label.

This label is affixed to the driver's side
centre pillar.

It bears the following information:
- the tyre pressures, for unladen and laden

conditions,

- the tyre sizes,
- the spare tyre inflation pressure,
- the paint colour code.

Various visible markings for the identification of your vehicle.

194

Technical data

C-elysee_en_Chap11_caracteristiques-techniques_ed01-2016

195

C-elysee_en_Chap12a_RD5(RD45)_ed01-2016

Your audio system is coded in such a way that it will

only operate in your vehicle.

udio system / Bluetooth

01 First steps

For safety reasons, the driver must only carry out

operations which require prolonged attention while the

vehicle is stationary.

When the engine is switched off and to prevent

discharging of the battery, the audio system may switch

off after a few minutes.

CONTENTS

02 Steering mounted controls
03 Main menu

04 Audio
05 Using the telephone
06 Audio settings
07 Screen menu map(s)
Frequently asked questions

196

C-elysee_en_Chap12a_RD5(RD45)_ed01-2016

On / Off.

FIRST STEPS

Volume adjustment.

Select screen display

between modes:

Full screen: Audio (or

telephone if call in progress) /

In a window: Audio (or

telephone if call in progress) -

Time or Trip computer.

Long press: black screen

(DARK).

Select AM / FM wavebands.

Select preset radio station.

Long press: store a station.

Display the list of stations received,

CD/MP3 tracks or folders.

Long press: managing the

classification of MP3/WMA files /

update the list of stations received.

TA (Traffic Announcement)

function On / Off.

Long press: access to type

of information.

Confirmation

or display of

contextual menu.

Automatic search up / down

for radio frequencies.

Select previous / next CD,

USB, streaming track.

Navigation in a list.

Abandon the current operation.

Up one level (menu or folder).

Manual step by step search up / down for

radio frequencies.

Select previous / next MP3 folder.

Select previous / next folder / genre / artist /

playlist in the USB device.

Navigation in a list.

Select source:

Radio, CD, AUX, USB,

Streaming.

Accept an incoming call.

Access to main menu.

Audio settings:

audio ambiences, treble, bass,

loudness, distribution, left/

right balance, front/rear fader,

automatic volume.

197

C-elysee_en_Chap12a_RD5(RD45)_ed01-2016

STEERING MOUNTED CONTROLS

Radio: automatic search for a higher frequency.

CD / MP3 / USB: selection of the next track.

CD / USB: continuous press: fast forwards play.

Move in the list.

Change audio source.

Confirm a selection.

Call/end call on the telephone.

Press for more than 2 seconds:

telephone main menu.

Radio: automatic search for a lower

frequency.

CD / MP3 / USB: selection of the

previous track.

CD / USB: continuous press: fast

reverse.

Move in the list.

Radio: select the previous/next pre-set

station.

USB: select genre / artist / folder from the

classification list.

Select the previous/next item in a menu.

Volume increase.

Volume decrease.

Mute: press the volume

increase and decrease

buttons simultaneously.

The sound is restored

by pressing one of the

two volume buttons.

198

C-elysee_en_Chap12a_RD5(RD45)_ed01-2016

MAIN MENU

Multimedia": Media

parameters, Radio

parameters.

Screen C

Trip computer":

Warning log.

"Telephone

": Call, Directory

management, Telephone

management, Hang up.

Personalisation-configuration":

Define the vehicle parameters, Choice of

language, Display configuration, Choice

of units, Date and time adjustment.

For a detailed global view of the menus

available, refer to "Screen menu map"

section.

Bluetooth connection":

Connections management,

Search for a device.

199

C-elysee_en_Chap12a_RD5(RD45)_ed01-2016

AUDIO

Press

SRC/TEL several times in

succession and select radio.

Press

BAND to select a waveband.

Press LIST

to display the list of stations

received in alphabetical order.

A press changes to the next or previous

letter (e.g. A, B, D, F, G, J, K, ...).

Radio

Select the desired radio station by

turning the control knob and confirm by

pressing.

Selecting a station

A long press on LIST builds or updates

the list of stations; audio reception is cut

momentarily.

The exterior environment (hills, buildings, tunnel, car park, below

ground...) may prevent reception, even in RDS station tracking

mode. This phenomenon is normal in the propagation of radio

waves and is in no way indicative of a fault with the audio system.

200

C-elysee_en_Chap12a_RD5(RD45)_ed01-2016

RDS, if displayed, enables you to continue listening to the same

station by automatic retuning to alternative frequencies. However,

in certain conditions, coverage of an RDS station may not be

assured throughout the country as radio stations do not cover

100 % of the territory. This explains the loss of reception of the

station during a journey.

AUDIO

RDS

Receiving TA messages

The TA (Traffic Announcement) function gives priority to TA alert

messages. To operate, this function needs good reception of a

radio station transmitting this type of message. When a traffic

report is transmitted, the current audio source (Radio, CD,

USB, ...) is interrupted automatically to play the TA message.

Normal playback of the audio source resumes at the end of the

transmission of the message.

Press TA

to activate or deactivate the

reception of traffic messages.

When the radio is displayed on the

screen, press the control knob to display

the contextual menu.

Select "RDS

" and confirm to save.

"RDS

" is displayed in the screen.

201

C-elysee_en_Chap12a_RD5(RD45)_ed01-2016

AUDIO

Radio text is information transmitted by the radio station related to

the current programme or song.

With the radio displayed on the screen,

press the control knob to display the

contextual menu.

Turn the control knob to select "RADIO

TEXT" then press to confirm.

Display RADIO TEXT

Screen C

202

C-elysee_en_Chap12a_RD5(RD45)_ed01-2016

AUDIO

Audio CD

Insert 12 cm diameter circular compact discs only.

Some anti-pirating systems, on original discs or CDs copied using a

personal recorder, may cause faults which are no reflection on the

quality of the original player.

Without pressing the

EJECT button, insert a CD in the player, play

begins automatically.

To play a disc which has already been

inserted, press the

SRC/TEL button

several times in succession and

select "

CD".

Press one of the buttons to select a

track on the CD.

Playing a CD

Press LIST

to display the list of tracks

on the CD.

Press and hold one of the buttons for

fast forward or backward.

203

C-elysee_en_Chap12a_RD5(RD45)_ed01-2016

AUDIO

CD, USB

Information and advice

On a single disc, the CD player can read up to 255 MP3 files spread

over 8 directory levels. However, it is recommended that this be kept

to 2 levels so as to limit the time taken to access and play the CD.

During play, the folder structure is not observed.

In order to be able to play a recorded CDR or CDRW, when recording

it is preferable to select standards ISO 9660 level 1.2 or Joliet.

If the disc is recorded in another format, it may not be played correctly.

It is recommended that the same recording standard is always used

for an individual disc, with as low a speed as possible (4x maximum)

for optimum sound quality.

In the particular case of a multi-session CD, the Joliet standard is

recommended.

Do not connect a hard disk or USB device other than audio players to

the USB port. This may cause damage to your installation.

The audio system will only play files with extension ".mp3" or ".wma"

and a compression rate that is constant or variable between 32 Kbps

and 320 Kbps.

It is advisable to restrict file names to 20 characters without using

special characters (e.g. " ? ; ù) to avoid any playing or displaying

problems.

The playlists accepted are types .m3u and .pls.

The number of files is limited to 5 000 in 500 directories on a

maximum of 8 levels.

204

C-elysee_en_Chap12a_RD5(RD45)_ed01-2016

CD, USB

AUDIO

Playing a compilation

Insert an MP3 compilation in the CD player

or connect a memory stick to the USB port,

directly or via an extension lead.

The system creates playlists (temporary memory) the creation time

for which can take from a few seconds to several minutes.

The playlists are updated every time the ignition is switched off or a

USB memory stick is connected.

Play starts automatically after a period which depends on the

capacity of the USB memory stick.

Use only USB memory sticks formatted FAT32 (File Allocation Table).

At a first connection, the order suggested is by folder.

When connecting again, the order previously chosen is

retained.

To play a disc or memory stick which

has already been inserted, press

SRC /

TEL

several times in succession and

select "

CD" or "USB".

Turn the control knob to select the next

or previous track.

Press one of the buttons to select the

next or previous folder in the order

chosen.

Press and hold one of the buttons for

fast forwards or backwards.

Press LIST

to display the menu of

folders in the compilation.

BACK

205

C-elysee_en_Chap12a_RD5(RD45)_ed01-2016

Select a line in the list.

Select a track or a folder.

Skip a track.

Up a level in the menu.

AUDIO

USB memory stick - File classification

Having selected the desired classification

By folders", "By artists", "By genres",

By playlists") press the control knob.

Then press the control knob to confirm and

save the modifications.

By folders: all folders containing audio

files recognised on the peripheral device,

in alphabetical order without following the

folder structure.

By artists: all of the artist names defined

in the ID3 Tags, in alphabetical order.

By genres: all of the genres defined in the

ID3 Tags.

By playlists: if playlists have been saved.

Make a long press on LIST or press

MENU, select "

Multimedia", then

Media parameters" and finally "Choice

of track listing" to display the different

classifications.

206

C-elysee_en_Chap12a_RD5(RD45)_ed01-2016

AUDIO

APPLE

players or portable player

Management of the device is via the audio system controls.

The audio files on a Mass Storage portable player* can

be heard through the vehicle's speakers by connecting

it to the USB port (cable not supplied).

If the portable player is not recognised by the USB port, connect it to

the auxiliary Jack socket.

The Apple

player must be updated regularly for the best connection.

The playlists are those defined in the Apple

player.

The Apple

player must be generation 5 or later.

* Check your player's manual.

Была ли эта страница вам полезна?

Да!Нет

1 посетитель считают эту страницу полезной.

Citroen C-Elysee (2017 year). Instruction — part 13

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.