Citroen Berlingo Multispace (2017 year). Instruction — part 6
79
EASE OF USE
and
COMFORT
4
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
REAR BENCH SEAT
Each 1/3 - 2/3 section can be fully
folded, then removed individually.
Head restraint
The 1/3 - 2/3 split rear bench seat is fitted
with "comma" shape head restraints.
High position: lift and raise the head
restraint.
Low position: press on the head
restraint to lower it.
To remove the head restraint, after
raising it press the tab and lift the head
restraint.
To install the head restraint, engage
the rods of the head restraint in the
holes keeping it in line with the seat
back.
80
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Fully folded position
Example of operations for the
1/3 section. They are identical for the
2/3 section.
-
Raise the grey control bar, located
at the rear of the seat cushion.
- Tilt the entire seat forward.
Putting back in place
Check that the seat is locked
on the floor securely when it is
returned to the sitting position.
-
Place the head restraints in the low
position.
-
If necessary, move the front seats
forward.
-
Press the grey control located on
the upper part of the seat backrest.
- Fold the seat backrest onto the
seat cushion.
Tilt the entire seat rearwards until it
locks into place.
Raise the seat backrest.
The seat is locked correctly when the
control (at the top of the seat back) is
no longer visible.
81
EASE OF USE
and
COMFORT
4
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Removing the bench seat
Refitting the bench seat
Refer to the "Fully folded position",
described previously.
To return the bench seat
(1/3 section and/or 2/3 section) to
the "passenger carrying" position,
refer to the "Fully folded position"
described previously.
-
Tilt the entire seat rearwards by
approximately 45°.
-
Lift the bench seat vertically to the
limit of the anchorages.
-
Straighten bench seat by tilting it
forwards then lift it.
-
If necessary, move the front seats
forward.
-
Place the bench seat (1/3 section and/or
2/3 section) in the fully folded position.
- Offer up the bench seat (1/3 section
and/or 2/3 section) vertically.
- Place the hooks between the
two bars.
- Fold the bench seat rearwards.
82
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
REAR SEATS (5 SEAT VERSION)
Head restraint
Each seat can be removed individually.
Each time a seat is returned to the
sitting position or after removing then
refitting a seat, check that it is locked
on the floor securely.
The three independent rear seats
are fitted with "comma" shape head
restraints.
The back of the centre seat, folded onto
the seat cushion, has a shell which
serves as a table with cup holder.
High position: lift and raise the head
restraint.
Low position: press on the head
restraint to lower it.
To remove the head restraint, after
raising it press the tab and lift the head
restraint.
To install the head restraint, engage
the rods of the head restraint in the
holes keeping it in line with the seat
back.
83
EASE OF USE
and
COMFORT
4
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Adjusting the angle of the seat backrest
Placing the seat back in the
table position
Returning the seat back to the sitting position
Placing the seat in the fully
folded position
Returning the seat to its original position
- Operate the control and adjust the
angle of the seat backrest.
- Pull the control to fold the seat back
onto the seat cushion.
Do not place hard or heavy objects
on the table. They could become
dangerous projectiles in the event of
sharp braking or impact.
- Release the seat back by pulling
the control, then return it to its
original position.
When returning the seat backrest to
the sitting position, ensure that it is
locked securely.
-
Pull the control to place the seat
back in the table position.
-
Raise the bar located behind the
seat to release the rear anchoring
points.
-
Tilt the entire seat forwards, until it
locks.
- Push the red control.
- Fold back the seat to fix the rear
anchoring points.
- Raise the seat backrest by pulling
the control.
- Check that the seat has correctly
locked into place.
Before unfolding the seat, check
that no object is obstructing the
anchorage points or preventing
correct locking of the seats.
84
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Removing the seat
-
If necessary, move the front
seats forward and lower the head
restraint.
-
Place the seat in the fully folded
position.
Good practice
Following the various operations:
-
do not remove a head restraint
without storing it and fix it to a
support,
-
ensure that the passengers can
always access the seat belts and
fasten them easily,
- passengers must never take
their seat without adjusting and
fastening their seat belt.
Refer to the "Fully folded position"
described previously.
-
Press the red lever to release the
front feet.
-
Tilt the entire seat rearwards by
approximately 45° without releasing
the lever.
- Release the lever.
-
Lift the seat vertically to the limit of
the anchorages.
-
Straighten the seat by tilting it
forwards then lift it.
Refitting the seat
- Tilt the seat forward by 45°.
- Place the hooks between the two
bars.
- Fold back the seat to fix the rear
anchoring points.
-
Pull the control to return the seat
back to its initial position.
- Raise the head restraint.
Before unfolding the seat, check
that no object is obstructing the
anchorage points or preventing
correct locking of the seats.
85
EASE OF USE
and
COMFORT
4
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Head restraint
This is of the "comma" shape type.
High position: press the tab, lift and
raise the head restraint.
Low position: push the tab and press
the top of the head restraint to lower it.
To remove the head restraint: place it in
the high position, lift it, then remove it.
Store it inside the vehicle, securing it
firmly.
To install the head restraint: engage
the rods of the head restraint in the
holes keeping it in line with the seat
back.
Each seat can be removed and must
be replaced in the specified position,
indicated by a symbol on its label.
The seats of row 2 and row 3 are
independent and adjustable.
REAR SEATS (7 SEAT VERSION)
86
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Left-hand outer seat
Types of Row 2 seat
Types of Row 3 seat
Centre seat
Right-hand outer seat
Right-hand outer seat
Left-hand outer seat
87
EASE OF USE
and
COMFORT
4
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Adjusting the angle of the seat backrest
- Operate the control and adjust the
angle.
Placing the seat backrest in the
table position
- Lower the head restraint fully.
-
Operate the control to fold the seat
back onto the seat cushion.
Returning the seat backrest to the
sitting position
- Release the seat backrest by
pulling the control, then return it to
its original position.
- Ensure that it has correctly locked
into place.
Placing the seat in the fully folded
position
- Place the seat in the table position.
-
Pull the red strap, located behind
the seat, to release the feet of the
seat from their anchorage on the
floor.
- Tilt the entire seat forwards.
Row 2 seat adjustments
Returning the seat to its original
position
- Unfold the entire seat.
Before folding the seat, ensure
that:
-
in row 3, no passenger's
foot is at one of the seat
anchorages on the floor,
- the seat is locked securely on
the floor,
-
the seat belt is available for
the passenger.
88
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Row 3 seat adjustments
Placing the seat backrest in the
table position
- Lower the head restraint fully.
-
Operate the control to fold the seat
backrest onto the seat cushion.
Returning the seat backrest to the
sitting position
- Release the seat backrest by
pulling the control, then return it to
its original position.
- Check that it has correctly locked in
place.
Returning the seat to its original
position
- Push the red control.
- Unfold the entire seat.
Placing the seat in the fully folded
position
- Place the seat in the table position.
- Raise the bar fitted with a red
strap, located behind the seat, to
release feet of the seat from their
anchorage on the floor.
- Tilt the entire seat forwards.
Ensure that:
- the seat is locked securely on
the floor,
-
the seat belt is available for
the passenger.
89
EASE OF USE
and
COMFORT
4
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Entering, exiting from Row 3
Entering
-
Place the row 2 seat in the table
position.
Exiting
- Lower the head restraint fully.
-
Operate the yellow control, located
on the back of the row 2 seat
backrest.
- Fold the seat backrest to the table
position.
Ensure that the centre seat belt is
stowed correctly in its housing in
the headlining.
-
Tilt it to the fully folded position to
allow access.
-
Pull the red strap to place the seat
in the fully folded position.
- Tilt the entire seat forwards.
- Exit via the side door.
Before folding it back, ensure that
the feet of the passenger in row 3
are not obstructing the row 2 seat
anchoring points.
90
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Removing a seat
-
If necessary, move the front seats
forward.
- Lower the head restraint.
-
Place the seat in the fully folded
position.
-
Tilt the entire seat forwards then
lift it.
Refitting the seat
The label on the seat indicates the
position in which it must be installed.
- Place the hooks of the front feet
between the two bars.
- Fold back the seat to fix the rear
anchoring points.
-
Operate the control to raise the
seat back to its initial position.
- Raise the head restraint.
Ensure that no object or foot of a
passenger seated in the rear is
obstructing the anchorage points
or preventing correct locking of
the seat.
Operating the Row 2 seats
91
EASE OF USE
and
COMFORT
4
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Operating the Row 3 seats
Removing the seat
- Lower the head restraint.
-
Place the seat in the fully folded
position.
- Tilt the entire seat forwards.
- On each side, take hold of the
uprights of the folded seat, tilting it
forward slightly, and lift it.
Refitting the seat
The label on the seat indicates the
position in which it must be installed.
- Place the hooks of the front feet
between the two bars.
- Ensure that no object or foot is
obstructing the rear anchorage
points and that the seat belt is
positioned correctly and available
for use.
- Fold back the seat to fix its rear
anchoring feet.
-
Operate the control to raise the
seat back to its initial position.
- Raise the head restraint.
Good practice
Following the various operations:
-
do not remove a head restraint
without stowing it; secure it inside
the vehicle,
-
ensure that the passengers can
always access the seat belts and
fasten them easily,
- passengers must never take
their seat without adjusting and
fastening their seat belt.
-
a passenger seated in row 3 must
ensure that he does not obstruct
the row 2 seat anchorage points,
-
a passenger seated in row 3 must
not have the seat in front of them in
row 2 in the folded position; this is
in case the seat could tip towards
the passenger unexpectedly and
injure them.
Do not place hard or heavy objects on
the seat backs forming a table, they
could become dangerous projectiles in
the event or sharp braking or impact.
92
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
MODULARITY AND DIFFERENT SEAT CONFIGURATIONS
5 seat layouts
93
EASE OF USE
and
COMFORT
4
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Seats
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
7 seat layouts
The various operations
must be carried out while
stationary.
94
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Practical information
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
FRONT FITTINGS
1. Lower glove box
This may or may not be fitted with a lid.
Upper storage compartment
This is located on the dashboard,
behind the steering wheel.
A recess makes lifting of the lid easier
when opening. Guide it to its rest
position.
To close, guide the lid then press the
centre gently.
Any liquid which could spill risks
causing an electrical short circuit and
therefore a potential fire.
3. Side storage compartment
4. Bag hook
Only hang flexible bags which are not
too heavy on this hook.
2. Storage pocket and bottle
holder (1.5 L)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст