Citroen C3 Pluriel Dag (2007 year). Instruction — part 3

2

1

II

34

D I S P L A Y S

Digital clock

To adjust the display, press on but-
ton 1 to alter the hours and on but-
ton 2 to alter the minutes.

Display A

Display C

D

2

3

A

C

B

E

E

D

C

B

A

E

1

II

35

M U L T I F U N C T I O N D I S P L A Y

D I S P L A Y A

The driver is recommended not to
concern himself with the display
controls while driving.

1. Time.
2. Date - Display zone.
3. Outside temperature.

When the outside temperature

is between +3 °C and –3 °C, the

temperature display fl ashes (risk

of ice).
Note: The outside temperature
displayed may be higher than the
actual temperature if the vehicle is
stationary in bright sunlight.
Remark: The display of certain
types of information is sometimes
scrolled and sometimes alter-
nated.

Controls

A. Access to the “Main menu” of

the display.

B. Scroll through display menus.
C.

Validation and Selection in the

menus, of the function chosen

or value modifi ed.

D. Cancellation of the operation or

return to the previous display.

E. Selection of the type of infor-

mation displayed in zone 2
(date, radio/CD and trip com-
puter).

E. In the Menus, choice of acti-

vation/deactivation of your
functions and choice of your
adjustments.

Main Menu

By pressing control A then B, you
have access to the following func-
tions:

Radio-CD (See radio-CD hand-
book).
Vehicle confi guration, to acti-

vate/deactivate:

The

automatic

guide-me-

home lighting.
Automatic lighting of head-
lamps.

Options, to display the alerts.
Display adjustments, to adjust
the date and time on the dis-
play.
Languages, to select the dis-
play language.
Units, to access the choices of
units of Temperature and Fuel
Consumption.

•

•

-

-

•
•

•

•

D

A

C

B

E

E

D

C

B

A

E

II

36

M U L T I F U N C T I O N D I S P L A Y

D I S P L A Y A

Personalisation/Confi guration

To activate/deactivate the auto-
matic guide-me-home lighting:

Press button A.
Select, using B, the sub-menu

to personalise-confi gure your

vehicle, then confi rm your

choice with a press on C.
Select guide-me-home lighting,
using B.
The system tells you the status
(active or inactive) of the func-
tion. Modify this status with a
press on E.
Then please wait for the display
to disappear.

•
•

•

•

•

To activate/deactivate the auto-
matic lighting of headlamps:

Press button A.
Select, using B, the sub-menu

to personalise-confi gure your

vehicle, then confi rm your

choice with a press on C.
Select automatic lighting of
headlamps using B.
The system tells you the status
(active or inactive) of the func-
tion. Modify this status with a
press on E.
Then please wait for the display
to disappear.

Note: Activation of this function
is immediate while deactivation
requires the ignition to be switched
off.

•
•

•

•

•

D

A

C

B

E

E

D

C

B

A

E

II

37

M U L T I F U N C T I O N D I S P L A Y

D I S P L A Y A

To choose the language:

Press button A.
Using B, select the sub-menu

for Languages. Confi rm your

choice with a press on C.
By presses on E, select the lan-
guage of your choice.
Then please wait for the display
to disappear.

To choose units:

Press button A.
Using B, select the sub-menu

for Units. Confi rm your choice

with a press on C.
Using B, select the unit you
wish to modify (Temperature or
Consumption).
Via presses on E, select the

unit of your choice.
Then please wait for the display
to disappear.

Note: This choice concerns all
the types of information (fuel con-
sumption, speed, etc.) that appear
on the displays.

•
•

•

•

•
•

•

•

•

To display the Log of Alerts:

Press button A.
Using B, select the sub-menu

for options. Confi rm your choice

with a press on C.

Note: You can cancel the start of
the display by selecting E to aban-

E

don, validate with a press on C.
The alerts that have previously
been signalled to you but not
resolved, are recalled to you in a
scroll.
To delete the display of an alert,
press D.

•
•

To adjust the date and the time:

Press button A.
Using B, select the sub-menu
for Display Adjustments, then

confi rm with a press on C.
Using B, select what you wish to
modify: Day, month, year, hour,
minutes and display mode.
Make

your

adjustment

by

presses on E. You can continue
your adjustments, selecting fur-
ther parameters by pressing B.
When you have fi nished your

adjustments, simply wait for the
display to disappear.

•
•

•

•

•

E

D

C

B

A

E

2

3

1

II

38

M U L T I F U N C T I O N D I S P L A Y

D I S P L A Y C

The driver is recommended not to
concern himself with the display
controls while driving.

1. Time.
2. Outside temperature.
3. Date - Display zone.

When the outside temperature

is between +3 °C and –3 °C, the

temperature display fl ashes (risk

of ice).

Controls

A. Access to the “Main menu” of

the display.

B. Scroll through display menus.
C.

Validation and Selection in the

menus, of the function chosen

or value modifi ed.

D. Cancellation of the operation or

return to the previous display.

E. Selection of the type of infor-

mation you wish to see perma-
nently displayed (date, radio-
CD, trip computer) on the right
of the screen.

Main Menu

Press on button A to bring up
the “Main menu” of the multifunc-
tion display. This menu gives you
access to the following functions:

Radio-CD
(See radio-CD handbook).

Trip

computer,

giving

you:

Entering the distance to
the destination

Access to the log of alerts
(recall of the alerts signalled
previously.
Access to status of functions,
for example activation/deacti-
vation of automatic lighting of
headlamps, ESP, windscreen
wipers.

•

•

•

Personalisation - Confi g-

uration, allowing you to
activate or deactivate:

The automatic guide-
me-home lighting.

Automatic lighting of head-
lamps.

And choosing:

The brightness, the time, the
date and the display units.
The display language.

•

•

•

•

Bluetooth

®

hands-free kit

®

(See radio-CD handbook).

Note: The outside tem-

perature displayed may be higher
than the actual temperature if the
vehicle is stationary in bright sun-
light.

E

D

C

B

A

E

II

39

M U L T I F U N C T I O N D I S P L A Y

D I S P L A Y C

Trip computer

To enter the distance to be trav-
elled on the trip computer:

Press button A.
Use B to select the icon “Trip

computer”, then confi rm with a

press on C.
Select entry of distance using B.

Confi rm your choice with a

press on C.
To choose the distance, select

the fi gure you wish to modify

by using B

, then confi rm with a

press on C.
Use B to adjust the value, then
validate by pressing C.
Validate “OK” on the screen.

To access the trip computer's
log of alerts:

Press button A.
Use B to select the icon “Trip

computer”, then confi rm with a

press on C.
Select the log of alerts.
When the list displays, use B to
scroll through it.
Press D to return to the perma-
nent display.

To access the status of functions:
proceed in a similar manner.

•
•

•

•

•

•

•
•

•
•

•

Personalisation/Configura-
tion

To activate/deactivate the auto-
matic guide-me-home lighting:

Press button A.
Use B to select the icon “Per-
s o n a l i s a t i o n - C o n f i g u r a t i o n ”

then confi rm your choice by

pressing C.
Then select the sub-menu for
the vehicle parameters. Con-

fi rm your choice with a press

on C.
Using B, select lighting and

signalling. Confi rm your choice

with a press on C.

•
•

•

•

Then press C to select/deselect
the guide-me-home lighting,
to activate/ deactivate it. After
activation, choose the duration:
press C then use B to select
the duration, then press C.
Validate “OK” on the screen.

To activate/deactivate the auto-
matic lighting of headlamps:

Press button A.
Use B to select the icon “Per-
s o n a l i s a t i o n - C o n f i g u r a t i o n ”

then confi rm your choice by

pressing C.
Then select the sub-menu for
the vehicle parameters. Con-

fi rm your choice with a press

on C.
Using B, select lighting and

signalling. Confi rm your choice

with a press on C.
Next press on C to activate/
deactivate automatic lighting of
headlamps.
Press button C.

Note: Activation of this function is
immediate while deactivation requires
the ignition to be switched off.

•

•

•
•

•

•

•

•

E

D

C

B

A

E

II

40

To adjust the display brightness:

Press button A.
Use B to select the icon “Per-
s o n a l i s a t i o n - C o n f i g u r a t i o n ”

then confi rm your choice by

pressing C.
Select the display confi guration

with a press on B

. Confi rm your

choice with a press on C.
Select the brightness adjust-

ment. Confi rm your choice with

a press on C.
Select with a press on B, then
validate by pressing C, the nor-
mal or alternative display mode.
To adjust the brightness, select
the symbols “+” or “–” and con-

fi rm your adjustment by press-

ing C.
Validate “OK” on the screen.

•
•

•

•

•

•

To adjust the date and the time:

Press button A.
Use B to select the icon “Per-
s o n a l i s a t i o n - C o n f i g u r a t i o n ”

then confi rm your choice by

pressing C.
Select the display confi guration

with a press on B

. Confi rm your

choice with a press on C.
Select the adustment for the
date and the time, by press-
ing B

, then confi rm with a press

on C.
Press B to select the values

you wish to modify. Confi rm

your choice with a press on C.
Do your adjustments with B,
then validate each adjustment
choice with a press on C.
Validate “OK” on the screen.

To choose the language:

Press button A.
Use B to select the icon “Per-
s o n a l i s a t i o n - C o n f i g u r a t i o n ”

then confi rm your choice by

pressing C.
Use B to select the desired lan-
guage and validate your choice
by pressing C.
Validate “OK” on the screen.

•
•

•

•

•

•

•

•
•

•

•

To choose units:

Press button A.
Use B to select the icon “Per-
s o n a l i s a t i o n - C o n f i g u r a t i o n ”

then confi rm your choice by

pressing C.
Select the display confi guration

with a press on B

. Confi rm your

choice with a press on C.
Then select the sub-menu for

Units. Confi rm your choice with

a press on C.
Using B, select the unit to be

modifi ed (Temperature or Con-

sumption) then validate with a
press on C.
Validate “OK” on the screen.

Note: This choice concerns all
the types of information (fuel con-
sumption, speed, etc.) that appear
on the displays.

•
•

•

•

•

•

M U L T I F U N C T I O N D I S P L A Y

D I S P L A Y C

II

41

T R I P C O M P U T E R

For selection and display of the
various types of information, give
short presses on the end of the
windcsreen wiper stalk.

Instrument panel (For a ver-
sion with digital clock)

The trip computer provides 4 types

of information on the instrument
panel, following the display of trip
mileage:

Range.
Instantaneous consumption.
Average consumption.
Average speed.

Remark: If the cruise control /
speed limiter is in operation, the
display of trip computer information
disappears after a few seconds.

•
•
•
•

Display A

The trip computer provides 5 types

of information:

Range.
Average consumption.
Instantaneous consumption.
Distance travelled.
Average speed.

To cancel the display of the trip
computer information, press a sixth
time.

•
•
•
•
•

With screen C, a press on
the “Mode” button brings
up permanent display of
the trip computer infor-
mation.

To reset the trip computer infor-
mation to zero, keep the end of
the control stalk pressed for a few
seconds when you see the relevant
information displayed.

II

42

The trip computer gives access to 3 types of instantaneous information:

Range.
Instantaneous consumption.
Distance remaining to be travelled.

The trip computer also gives access to 3 types of information for 2 Journeys 1 and 2:

The distance travelled.
Average consumption.
Average speed.

The Journeys

Journeys 1 and 2 are independent of each other but identical in use. For example you can allocate Journey 1 to daily

calculations and Journey 2 to monthly calculations.

Resetting a Journey to zero

When the desired Journey is displayed, give a long press on the end of the wiper control stalk.
Remark:
After a re-initialisation of the trip computer, the indication of range only becomes signifi cant after a certain period of

use.

•
•
•

•
•
•

T R I P C O M P U T E R

Display C

II

43

Range

This is the distance that can still be travelled
on the amount of fuel remaining in the tank.
When the distance that can still be travelled

is less than approx. 25 km (around 16 miles),

only three dashes are shown.

Average consumption

This is the relationship between the fuel con-
sumed and the distance travelled since the last
reset to zero of the trip computer.

Instantaneous consumption

This is the result from the consumption recorded

within the last 2 seconds. This function is only

available when travelling at over 30 km/h.

Average speed

This is obtained, from the last reset to zero of
the trip computer, by dividing the distance trav-
elled by the time taken (with ignition switched
on).

Distance travelled

This is the distance that has been travelled

since the last reset to zero of the Journey

selected.

Distance to be travelled

To enter it, see “Multifunction display”.

Instrument

panel

Display

version A

Display

version C

T R I P C O M P U T E R

II

44

S I G N A L L I N G

Direction indicators

Left, downwards.
Right, upwards.
For a change of direction, move
the control stalk beyond the tight
spot. Stops automatically with the
return of the steering wheel.

Visible alert / headlamp

fl ash

Pull the control towards you.
The headlamp fl ash can be made

even with the ignition switched off.

Horn

Press at the centre of the steering
wheel.

Hazard warning lamps

This operates all the direction indi-
cators simultaneously.
Only use them to indicate dan-
ger, for an emergency stop or for
driving in abnormal conditions.
The hazard lamps can also be
used with the ignition switched off.

Sound signal for headlamps
left on

This operates when the driver's
door is opened, ignition off, to indi-
cate that the vehicle lamps are still
on.
It stops when you close the door,
switch off the lamps or switch on
the ignition.
This signal does not operate if the
automatic lighting of headlamps
or the guide-me-home lighting are
active.

Emergency operation of haz-
ard warning lamps

A sudden deceleration of the vehi-
cle causes the hazard lamps to
come on automatically.
They will cease to operate auto-
matically, or manually if you press
the hazard lamps button on the
dashboard.

The direction indicators cannot operate if the hazard warning

lamps are on.

A

II

45

S I G N A L L I N G

Lighting control stalk

All vehicle lamps off

Sidelamps on

The instrument panel lights up.

Dipped

beams/

main beams on

Rotate the ring A forwards.

Rotate the ring A forwards.

Sidelamps and dipped beams
come on automatically in poor
ambient light, or if the wipers are in
continuous operation. They go out
as soon as the ambient light again

become suffi cient or when the wip-

ers cease to operate.

Guide-me-home lighting

This function switches on your
headlamps, to light your way when
you wish to walk from a carpark,
for example.
This function is activated:

Manually by pulling the lighting
stalk towards you, ignition off.
Automatically, provided:

The

automatic

lighting

of

headlamps is activated.
To activate the guide-me-
home lighting function, select
in the “Main menu”, then in
“Personalisation/Configura-
tion”, the sub-menu for light-
ing and signalling, then acti-
vate the function.
See “Multifunction display”.

Note:

It is possible to modify the dura-
tion of the guide-me-home lighting
(approx. 60, 30 or 15 seconds) in
the menu “Personalisation/Con-

fi guration”.
On screen A, the length is

fi xed.

Note: On vehicles equipped with
daytime running lamps, automatic
headlamp lighting and guide-me-
home lighting are not available.

•

•

-

-

•

•

Rotate the ring A forwards.
Pull the control stalk towards you
to change between dipped beam
and main beam.

Rotate the ring A forwards.
Take care not to cover the bright-
ness sensor, which is visible
from outside the windscreen,
behind the interior rear view mir-
ror.

Automatic lighting of
headlamps

B

C

II

46

S I G N A L L I N G

Rear foglamps on

Front foglamps and rear foglamps on

The warning lamp lights up.
The foglamps operate only with
either headlamp dipped beam or
headlamp main beam switched on.

Switching off

First action rearwards, rear foglamps off.
Second action rearwards, front and rear foglamps off.
Note: the foglamps should be used only in fog or in other conditions of poor
visibility.

Front and rear foglamps
(ring C)

Switch on your dipped/main beams.

In foggy conditions, if the ambient light is not such that the

headlamps come on automatically, it is up to the driver to switch

on dipped beams, and/or foglamps, manually

Rear FOGLAMPS (Ring B)

Switch on your dipped/main beams.
Rotate the ring B forwards.

Front foglamps on

Rotate the ring C forwards.

Rotate the ring C forwards.

II

47

Windscreen wiper

Control positions

2: Rapid wipe.
1: Normal wipe.

I

: Intermittent wipe.

0: Off.

One press downwards:

AUTO: Automatic wipe acti-
vated.
Single wipe.

•

•

For safety, the wiper system
is deactivated when the igni-
tion is switched off.

Position

I

: The wipe speed adjusts automatically to the speed of the vehi-

cle.
Positions 1 and 2: When the vehicle is stationary, the speed of the wipers
will reduce automatically.
For safety, the wiper system is deactivated when the ignition is
switched off.
When you switch the ignition on again, to reactivate the function:

Return to position 0.
Or go to the desired position.

Activation of the function is confi rmed by one sweep of the wipers.

Vehicle with rain sensor

Activation of automatic wipe:

One touch downwards: “AUTO”. The wipe speed will adjust according to the
intensity of the rain.
Note: If automatic wipe is active, a touch downwards triggers a single wipe,
without deactivating automatic wipe.

Deactivation of automatic wipe:

Go to position

I

, then return to position 0.

Or stop the engine.

WARNING

Do not cover the rain detector which is located behind the interior rear

detector

view mirror and visible from outside the windscreen.
For washing the vehicle, switch off the ignition or deactivate the automatic
wipe.

-
-

•
•

W I P E R S

B

A

II

48

W I P E R S

In freezing weather, check that the wiper blades are not frozen on

the screen.

Remove any accumulation of snow at the base of the windscreen.

Changing the wiper blades

If you have to replace them, the
wiper blades have to be parked in
the maintenance position. For
this, switch off the ignition and then
within one minute move the wiper
control stalk. The wipers stand up
in a vertical position.
After replacement, switch on the
ignition and move the wiper
control stalk so that the wipers
resume their normal position.

A. Windscreen wash

To operate the windscreen wash,
pull the wiper stalk towards you.
The screen wash is accompanied
by a timed wipe of the windscreen,
the headlamp wash also activates
if the dipped beams are on.

II

49

D A S H B O A R D A D J U S T M E N T S

Headlamps adjustment

You are advised to adjust the aim
of the headlamps in accordance
with vehicle load.
In the dashboard on the right hand
side of the steering column.
0: Unladen weight.
1: Lightly laden.
2: Half laden.
3: Fully laden.

As a metter of safety, these manœuvres should not be performed

while the vehicle is moving.

Steering column adjustment

The steering can be adjusted for
both height and reach.
With the vehicle stationary

, fi rst

adjust your seat to the most suit-
able position, then adjust the posi-
tion of the steering wheel. See
“Driving position”.
Unlock the steering wheel by pull-
ing the control upwards.
Adjust the position of the steering
wheel then lock by pushing the
control fully downwards.
Make sure that you have a good
view of the instrument panel dis-
plays.